Clearing Fault Codes on the TT..ish
HTML-код
- Опубликовано: 8 июл 2018
- Attempting to clear the array of fault codes on the project Audi TT Quattro. Plus MAIL TIME!!
Follow Me:
Instagram: sarahntuned
Snapchat: sarahntuned
Twitter: sarahntuned
Wheelwell: sarahntuned
www.patreon.com/sarahntuned
www.amazon.com/shop/sarah-n-t...
Fan Mail:
Sarah-n-Tuned
P.O. Box 1250
Vail, AZ, 85641-9803
Special Thanks to my Patreon Support!
Anthony R.
Brandyn E.
Carl N.
Thomas B.
Tisha H.
Mark L.
Nenad R.
Noco
Ryan S.
Stuart T.
Travis Y. 
Авто/Мото
"i'm going to tork your tt's" -lil sara. LOL
this channel needs way more subs, super cute woman who knows more about cars than most of her viewers!!
HotShotVQ35 amen to that! !
And she's not afraid to admit that she takes advice from the people who do know their stuff.
and I doubt people wanna see my beat up Chevy k20 longbed 4x4 farm truck miss Sarah mam. Oh and I don't have instagram anyways only social media I use is Facebook.
ABS faults don't disappear until you drive the car at more than 15-20 mph, car doesn't get input from the sensor when standing still :) At least on what I've seen so far.
Watching the opening of packages reminds me of all the fairy tales when all the suitors across the land would send lavish gifts to the fair maiden.
Just in case you didn't know, make sure to loosen torque wrenches back past zero before you put them away. Otherwise spring inside can get effected over time and will give false torques from than on.
Another tip is never use a torque wrench to undo fasteners, you’ll ruin it, only ever tighten with it. I’ve seen a lot of vids on RUclips with people using a torque wrench like a breaker bar
Enjoy the Tekton pick set. That was my gift.
Ross-Tech sells good software for the pc for VAGCOM and ECS Tuning sells a nice handheld scan tool for VW/Audis. Keep up the good work Sarah! 👍
You're going like a train... posting at least two videos a week without sacrificing quality is a hard task, my congrats!
The Mad Technician thank you for noticing!
Still love that you are who you are! I think it is wonderful to see a person enjoying what they do. I believe in you!
You two are fantastic together! Love your video's as well as "mail time"! :)
Nice, building a good tool set! I just can't wait to see you on a track tearing it up and going full beans!!!
Keep up the great content!! What makes your channel so great is you struggle and make mistakes just like we all do. Showing strong perseverance and determination is a very admirable thing. Great job!
I love how intelligent and down to earth you are. Looking forward to more videos from you.
I agree... being real and sincere is a big part of your sweet personality. Don't ever change.
Class act just handing the Ford brake grease to little Sarah almost immediately with no hesitation or regret.
You two crack me up! Love how genuine you are, keep up the great work!
I love the unboxing stuff! btw, congrats on the 100K subs! FANtastic and well deserved!
Sweet gifts, the little pick set was from me. You will find that vise indispensable when its mounted. It would seem your benefactors think you need to get a bigger tool box/cabinet. That is a good thing. Those Snap On square handled screwdrivers are the best. I got some Williams copies and they are my go to ones.
Yay another Sarah Times Two episode. You two are a hoot together. Keep up the great work.
Tucson is awesome! Love all the taco places in AZ. I used to stay on Davis Monathon AFB on E. Golf Links Rd. Loved the area. Had family up in Buckeye/ Phoenix area which was great. You're videos are fun, thanks!
Sarah, you can clear the codes from the computer by removing the positive cable and touching it to the black ground cable. Battery disconnected of course.
By doing this you drain the capacitors that hold the memory values in the computer. Keep at it Girl. You're making progress!
It's good to see a female who's not afraid to get greasy and work on their own car love the vids keep up the great work and your roommate is beautiful
Christmas in July, yay
The two of you were fun to watch
Good to see you both again!
Another great chapter, Sarah. It's so cool that you got TWO pick sets from subscribers. I guess I can delete the set I have in my Amazon cart that I was going to send to you. I have something else though, that you haven't got, that I plan to send. Damn, that TT has turned out to be a real piece of work! I'm sure that you'll get all the problems resolved, though. Rock on girl!
Great work, Sarasssssss, so glad your watchers are so generous....
I always laugh so hard watching your videos. Love it - best automotive channel on RUclips.
You'r so productive in fast forward!
Lil Sarah was straight crushing that TB! TOO cute! BTW, great video! Keep 'em coming :)
Hey there Sarah and little Sarah you guys are great together you guys are so genuine. I just started watching you Sarah and I'm already starting to crush on you. Your a beautiful lady. Keep up the awesome work.
Awesome Video you are truly a Genuine person take care always.
I'm glad someone sent you a bench vise. Now all you need is a bench.
Hi Sarah you don't need the resistor you mentioned for the brakes all you need to do is join the 2 wires together by piece of wire or if its never needed again then cut the plug off and join them that way as the the abs if you don't have the ability to reset the computer then take the car up over 10 to 20 mph and then it should rest its self if not stand on the brakes what ever wheels lock could be where the problem is
Ps you have a amazing channel and love watching it
For dealing with codes and computers, get Torque, I got that for my phone, and use a bluetooth ODB tool. AND you can watch realtime data from the engine computer.
I'm so happy for you that you get so awesome gifts. Your subscribers really appreciate you. I know I do.
This video was one asston of fun - keep up the great work and vids.
You're killing the subs 💪🏻
Ha ha summer problems I miss you. Killer vid as always.
OMG I had that problem you did with the ABS sensor with a crankshaft position sensor on my Subaru before. Mine had a metal sensor tip though. I had to stick a needle nose in and pull out all the wire winding, then use a chisel to cut the canister down the side, then literally peel it out of the hole. What a pain!
802 Garage, man, yikes.. I need to replace the crankshaft position sensor in my XTerra this weekend. I’m now thinking I need to prepare for battle.
I like when the two Sarah's work together make a more videos together you guys are hilarious you guys so funny
Nice video Sarah-n-Tuned like it .and little Sarah too.
I used to work in a place that makes those wheel movement sensors. I agree, the computer needs you to drive it a little before it can possibly know it's been fixed.
Check the fuse for the abs system. I had a passat that was missing a fuse and when I remedied that, the light went off.
For the record...love all your videos! ...and I'm pretty sure swamp coolers work as a closed system. In other words, it would help if the garage door is closed. 😘
Love the video and liked your top. To sort out the errors you need to clear them by a diagnostic tests
Here in vermont it has been freaking hot here! This year has been the hottest summer ive ever had! And this state is normally very cold.
great vid ! thanks, Sarah . hi little Sarah !!!
VCDS or VAG-COM also has a generic OBD2 mode so useful on other makes of vehicles
Love the vids, helping me alot with faults on my tt
Excellent video as always.
Hey u2 vcds great for vag even this old tt, I know I use it on mine. Also re brake pad warning, just solder the wires together and heat shrink wrap - job done.
We need merch From our favorite channel, Sarah!
I’m not sure about Audi, but when I replaced my ABS sensors on my Nissan I just drove for 5 minutes and that cleared the light. Maybe that might help with your light as well. Keep up the great work!
You’re both awesome! Keep it up 😊👍
Thanks for clarifying that you meant Teeter Tot while referencing the potato things called Tater Tots my OCD was killing me ;-) Love the channel keep up the good work!
Sarah, attach a length of 2x12 oak (however long you need it but extend past the studs) to the garage walls/studs with heavy hinges. Cut a 12"x2" piece of oak from corner to opposite corner to make 45deg angles. Attach those to the studs with 2 heavy hinges per 45. You can get fancy and cut a notch in the drop down board for the vice to keep the 45s in place. I bolt my vice to the board as I need it and store it in a cabinet when not used. It's fast with an impact and wrench. Viola! instant fold up bench. I've had upwards of 180 pounds on mine and it's solid. (I used it to stand on a couple times. If OSHA is reading this then it never happened. LOL! )
Sarah, If you know someone with VAG-COM (VCDS) you can code out the brake pad wear sensor. Very easy, takes about 30 seconds. You don't need the resistor if you code it out. Nice work!
Your so awesome Sarah!
Have had a CEL on my 1.8t for 6 years lol. It's listed as the front O2 sensor, however the sensor still works fine so I haven't forked over the money to replace it. Even after I did a new cat/downpipe mod. I can clear it, or it goes away after unplugging the battery for a little while. Covered it with a piece of tape and I'm set :D
Welcome to Volkswagen
Take out the gauge cluster and put electrical tape on the bulb (don't just remove the bulb). Re-install gauge cluster and no more need for ugly tape.
You ll need VCDS program to run VAGCOM-diagnostics. And also I think that to remove errors from dashboard you ll need to remove them from according units memory first,
Why the world hasn't got more girls like you, all of them make their fingernails all day and dont know how to make a simple lunch.You are the dream for every man! Greetings from Bulgaria ( p.s. I also drive a TT and lovin it ):)
BRAVO LADIES! Drive on and little Sara I don't know if you ever served but Drop! and give US 20 =) TTFN.
Omg! You said sauna correctly! Music to my ears.
I've had similar abs sensor issues with a Ford escape, and had the retaining bolt break on a ram 3500, and another vehicle that's slipping my mind that totally melted from a wheel bearing going, or something. They're surprisingly problematic when salted roads are thrown into the mix.
Really like this channel I use to work on my cars like this all the time like my classic 1966 mustang. Also Love your soft milky white skin :-)
Wait a sec, your housemate is also a Sarah? !!!! Talk about an awesome household. Sarah's are the most awesome people in the world in my book!!!
I just submitted my car photo. It is still a work in progress but that photo was before a couple mods were done (paint).
Hey Sarah. This happens to all abs sensors placed in the fusee. After about 10 years they are stuck by corrosion. In some German cars the abs light will reset when driving the car for a couple of hundred meters(1/8 mile), when the abs sensors were the actually problem. If not, I think you have a bad abs module. So take it for a small drive. Maybe the TT will reset itself while getting signals from the new sensors. If not you have to reset the codes by obd indeed. Dutch regards.
I'm glad you like the screwdrivers ☺ I hope the other stuff i sent you comes in handy also.
I have the same screw driver set (not in pink of course). That set is the defacto standard for mechanic screw drivers. I don't own a ton of snap on but that set is a must! Well played sir.
I love your videos and vlogs... also your roommate needs her own channel she is adorbs...
I LOVE YOUR SHOWS
Yay another Sara video 😊
chad harmon agreed
Those orange seats are sweet!!
You are just the best!
Have you thought about a mini split or a wall mount A/C? Those temps are ridiculous!
Sarah. Ross tech vcds for the laptop for deep scans.. obdeleven for portable quick scans.. both clear scans.. both does the job.. both have its uses. Play with it your smart enough to put it to good use
I'm inspired by your "clean as you go" approach. Probably mentioned it before but each video I notice the cleanliness of your projects. What is your plan for the TT? I've seen the videos but I don't remember a plan. You were a little lucky with the sensors when you removed the discs. I'm second owner on my A4 and replaced the pads for the first time but both of the counter-sunk screws that hold the discs in place were broken off and required drilling out.
Hola !! you should sent the dashboard or instrument cluster to the bba reman guys they do a great work fixing the missing pixels !!
Wow, automotive repair advice as well as a Taco Bell Mukbang! This channel is best😊
I like tt's in tank top's
In the UK the ABS sensor bolt would have corroded and probably snapped to. I tend to put a little mill bit in my dremel and cut the old sensor out when it sticks like that
Yay great vid so excited to enter your email comp B-)
Y’all need to check out ‘The Quesadillas’ on Grant and Craycroft. They have some of the best Mexican food in town. Hands down.
"You love cute things" I guess that's why you have Sarah as a roommate because she's the cutest!
Love your tattoos!!!
Props for saying the word Sauna correctly 👍🏼
Great video. Submitting my car to your contest!
Wow! Nice back side! Thx.
Ha, ha, you have a real 'pre-coffee' morning look Sarah 😂.
He's from Big Hero 6. Sara was so close. Watch it with my daughter all the time (I secretly love it too)
To delete the brake pad wear sensor just Join the two wires coming from the car, you dont need a resister as its just a logic path if pad sensor touches the disk it wears off the tip of the sensor and opens the circuit by just joining the wires and heat shrink them to water proof it you will be good - I have it done on my BMW and on my Wifes VW Passat
You should buy the "OBDeleven" it can read and delete all the vagcom codes. I have it and use it for my audi and VW
I love TTs 😉
easy way to remove rubber bushes and melted in sensors is with flame. plus its awesome fun. wear a breathing mask if not enough ventilation though aye. suspect you will need a scantool to reset the ABS fault code dude too.
Probably a little late here but you can code out the brake wear in the cluster via VCDS.
Hey Sarah, welcome to working on the rust belt cars.lol. does the brake warning light stay on along with the abs light when you're driving?
I once bought a car based solely on this woman’s facial expression while driving it
Which one.
jody024 GT350
Dont leave us hanging, What kind of car ?? Which episode? time stamp?
Did you check the abs fuse? When one of the wheel sensors go bad, abs continously kicks in, so some people choose to remove the abs fuse to get rid of that. Thats what i did on my explorer lately.
Yes the torque wrench was from me! It was supposed to come with a gift note. Hope you found it! It had a nice message and my name. :)
P.S. I love Taco Bell!
802 Garage I found it after I filmed that part, thank you!!!!
Of course! You deserve the support. I think you get more gifts than any other car RUclipsr, hahaha. :)
802 Garage check out the south main auto RUclips channel too.
Do they get tons of gifts? I've def watched the channel before.
yeah they do. btw my brother lives in vt, where in vermont are you fron?
I'm late but I'm definitely here!