How To Refill Black Hp 302 62 61 302xl 62xl hp302 301 62 Ink Cartridge Hp 304 303 60 123 664 664xl

Поделиться
HTML-код
  • Опубликовано: 6 сен 2024
  • A very easy to follow guide on how to refill your black Hp 302 or 62 ink cartridge. Kits available here
    bit.ly/2iC3AzU For the 30ml Kit
    bit.ly/2ybsixt For The Xl 90ml Kit

Комментарии • 96

  • @janneykchapstick5300
    @janneykchapstick5300 5 лет назад +2

    My question is why do you insert the needle through the bottom of the cartridge and is there a hole there as well as under the black dot on top? I ordered your kit and I'm working on this.

    • @Theinkrefillexperts
      @Theinkrefillexperts  5 лет назад +1

      Hello it’s best to inject the ink as shown in the video. It gives the sponge s better chance of sucking up the ink

  • @marino989su
    @marino989su 4 года назад +1

    Great tutorial. Only thing which I would add, I was not able to have that dock for cartridge, so I blow a bit in cartridge and done the same job!.
    Thanks

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      I would not recommend blowing in the cartridge , especially not the colour.

  • @doreenprentice6054
    @doreenprentice6054 3 года назад +1

    is it possible to fill catridges which have been sitting empty for 6 months?.....also is there another way to pull the ink through once filled or do you need to buy the docking thing?

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад +1

      Hello, you should be able to. Especially the black and yes the printing tool is the secret to successfully refilling.

  • @tramphan8374
    @tramphan8374 4 года назад +1

    Hi, I followed your instruction. Everything is good except my printer keep saying " ink cartridge must be replaced" Do you know how to fix it? Thank you. :)

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      Hello , just ignore the low ink warning. It should print normally.

  • @PinguTM
    @PinguTM 4 года назад +1

    when priming do I need to block the needle hole with finger or keep it open

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      You can block it if you wish but there should be no need as it takes only little pressure.

  • @leepolam
    @leepolam 4 года назад

    My HP printer 2630 still say it’s cartridge issue, low ink or no ink now even though I have refilled the ink cartridge, cleaned the print head, still won’t print a single sheet. Only thing it can print is after printer reset the test page showing all values and ink pattern. Once I send something to print it just stops

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      That will be because when you set up your printer you agreed to share information with HP about usage , or maybe even signed up for instant ink.
      Uninstall and reinstall the printer and never agree to share information with HP.

  • @jjgengland1486
    @jjgengland1486 6 лет назад +3

    Happy days ,thanks to your vid you've saved me a fortune on black ink just done it worked a treat nice 1 :) whish i could do colour

  • @azercana222
    @azercana222 3 года назад +1

    Can I use any brand of ink? Though thank you so much it’s very helpful ❤️

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад

      You can use any good quality ink.
      But the kit is available on 118ink.com

    • @pixelsafoison
      @pixelsafoison 3 года назад +1

      Rude, the guy is making the video to promote his company c'mon x)

  • @interiorsde
    @interiorsde 3 года назад

    hi I have followed your instructions fine done the test on tissue paper fine but when I load it into my HP printer the ink does not print any ideas whats happening please thanks Denise

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад

      Try uninstalling and reinstalling the printer software. You have most likely signed up to instant ink or are sharing usage information with HP. Never share information with Hp

  • @proudtobeunamerican3017
    @proudtobeunamerican3017 7 лет назад +3

    Nice vid. Any advice on what to do if you're not getting a nice black line after filling an hp 62 cart? I did three cleaning cycles and an alignment. No luck. Black doesn't print at all.😩

    • @Theinkrefillexperts
      @Theinkrefillexperts  7 лет назад +3

      When you filled did you suck out the ink after ?
      If you did not this is why its not working because the ink needs to be pulled down to the print head. If you do not have a tool , have a look at my other video which describes how to fix blocked print heads. You can replace the cleaning fluid with warm water. But ideally you need to make sure the cartridge is not very dry.
      Hope this helps and if you have any more questions please ask.
      James

    • @proudtobeunamerican3017
      @proudtobeunamerican3017 7 лет назад

      Printer Refresh Ltd . Thanks a lot for the quick and informative response. I'll definitely take a look at the vid you suggested and work from there.

    • @Theinkrefillexperts
      @Theinkrefillexperts  7 лет назад

      You are very welcome , the main things to remember is to try fill when the cartridges are fresh.

    • @Theinkrefillexperts
      @Theinkrefillexperts  7 лет назад

      +Quianna David hello try looking at my other video about blocked ink cartridges. You can replace the fluid with warm water.

    • @Theinkrefillexperts
      @Theinkrefillexperts  7 лет назад

      +Quianna David you could try following my vid on how to unblock ink cartridges. And replace the fluid with warm water.

  • @m1ishkop1shko
    @m1ishkop1shko 2 года назад +1

    My cartridges are SETUP H, can these be refilled? And what about the F6U66AE? I have an HP ENVY 4527 AIO

    • @Theinkrefillexperts
      @Theinkrefillexperts  2 года назад

      Hello, yes no problem at all. What number cartridges?

    • @m1ishkop1shko
      @m1ishkop1shko 2 года назад

      @@Theinkrefillexperts The ones that came from factory, 302 standard. I read those are the only ones suitable for the 4527 model

    • @Theinkrefillexperts
      @Theinkrefillexperts  2 года назад +1

      Yes they are refillable with the exact same method in this video.
      Please like and subscribe.

    • @m1ishkop1shko
      @m1ishkop1shko 2 года назад

      @@Theinkrefillexperts Thanks, I read these setup h cartridges weren't suited to refill and some people were having issues because the printer wouldn't read their chips up, is that so? In any case I bought one standard just in case to refill later on

    • @Theinkrefillexperts
      @Theinkrefillexperts  2 года назад

      They can be refilled no problem.

  • @Jack-vr1xg
    @Jack-vr1xg 7 лет назад +2

    Hello this was really easy to follow thank you very much 😃😃

  • @meridjahadj406
    @meridjahadj406 2 года назад

    how many times i can refill cartridge?

  • @hopidushibosa
    @hopidushibosa 3 года назад

    Good morning, everytime I refill the 63 or most all HP ink cartridge it keeps leaking for quite awhile, sometimes hours or next day.
    I put it on the table with nothing under it (so it won't suck the ink) and when I come back after one hour the cartridge leaked and strangely enough, mostly magenta. Would you know why?

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад

      It will be because of either of two reasons. You are over filling or you have pierced the filter by pushing the tip of the needle in too far , ink cartridges never ever leak if refilled correctly.

    • @hopidushibosa
      @hopidushibosa 3 года назад

      @@Theinkrefillexperts tHANK YOU FOR THE QUICK REPLY. I will open this cartridge that I have here and see IF indeed I puncture the little square under the sponge/foam.

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад

      You are very welcome.

  • @crebegea
    @crebegea 5 лет назад +2

    Nice and clean. Great vid!

  • @HusnainZamaan
    @HusnainZamaan 6 лет назад

    works but a put 5ml ink in regular cartridge

    • @Theinkrefillexperts
      @Theinkrefillexperts  6 лет назад

      My advice is to put in 4ml or the sponge will overflow- you may not see it as it will leak internally.

  • @AardieArt
    @AardieArt 4 года назад

    Bro where do I get that cartridge holder thing? Awesome video

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад +1

      Thank you
      www.118ink.com/shop/hp-hewlett-packard/premium-refill-tool-for-hp-black-ink-cartridges/

  • @brucegermann1317
    @brucegermann1317 4 года назад

    Hello. I have the 2iC3Azu and the 2ybsixt kit. I've watched the above video. My package came with 4 needles that clearly are to fill the the various colors. What I don't have or see is a way to pierce the bottom of the ink cartridge. If I am correct, the cartridge should be pierced through the silver strip located between copper bands. I was not supplied with the tool used in the video that pierces the silver strip. I attempted to pierce with the supplied needles, but stopped when the amount of force I was using seemed excessive. Please advise.

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      Sorry but nowhere in the instructions does it say to pierce the bottom. Please follow the instructions in our videos.
      Thanks

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      Plus you don’t pierce the bottom the tool provide sucks out the ink through the bottom as that’s where the ink naturally comes from , if you have attempted to pierce it with a needle then I am afraid you will have damaged the cartridges.

  • @bigg8533
    @bigg8533 9 месяцев назад

    After refilling it is still not working 😢

  • @shadow_deagle_wolf6666
    @shadow_deagle_wolf6666 5 лет назад

    If I buy the product would I also get the label?

  • @ravninderpalsingh7687
    @ravninderpalsingh7687 3 года назад

    hello, I have ordered the XL 90 ml kit, but not received any confirmation in my email or any delivery date. thanks.

  • @bernieoldham7580
    @bernieoldham7580 5 лет назад

    how much ink goes into 304 cartridge and my cartridge holder to prime ,is not same as yours .how does it grip cartridge. proper instruction would have been nice

    • @Theinkrefillexperts
      @Theinkrefillexperts  5 лет назад

      It takes 4ml.
      The flat holder works exactly the same , you just have to hold it in place , and if your cartridge is fresh it will work very easily.
      Thanks

    • @bernieoldham7580
      @bernieoldham7580 5 лет назад

      thanks for reply can you elaborate about flat holder .the holder in video is simple to understand . should have stuck with that one

    • @Theinkrefillexperts
      @Theinkrefillexperts  5 лет назад

      I think the listing had the option on buying the premium holder ?

  • @anneblackford3066
    @anneblackford3066 5 лет назад

    Great Video and got the ink in perfectly , yet my hp printer is rejecting the cartridge .

    • @Theinkrefillexperts
      @Theinkrefillexperts  5 лет назад

      Hi Anne , what is it saying ?

    • @anneblackford3066
      @anneblackford3066 5 лет назад +1

      @@Theinkrefillexperts Its saying .Ink cartridge(s) problem . The following ink cartridge(s) must be replaced . l have filled up two and tried both and still getting the same message . l usually buy off a seller who refurnishes his own and they print great .

    • @Theinkrefillexperts
      @Theinkrefillexperts  2 года назад

      It will have been a faulty cartridge. Or perhaps the contacts had ink on them.

  • @itsbenyt9025
    @itsbenyt9025 4 года назад

    Hi again sorry to bother you but I recently bought a refill kit from tesco black ink. but my syringe is longer than yours I don't know what to do but it comes with little nibs do I put them on the holes because it says I should and that may shrink the size and I also tried doing it on my own today got a mess all over my mums table and floor and used most of the kitchen roll and its permanently stuck to my hands but it also comes with liquid netttoyant and it ses clea what the hell is that for if so please Help Meee

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      Sorry but it sounds like a really poor quality kit. What would you like me to help you with ?

    • @itsbenyt9025
      @itsbenyt9025 4 года назад

      @@Theinkrefillexperts Its not I just dont have that dumb stand

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      It’s not dumb ...it’s amazing 😀

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      And we now have an even better one.

    • @itsbenyt9025
      @itsbenyt9025 4 года назад +1

      @@Theinkrefillexperts Well I cant afford £7.99 for another kit my mum will go mad

  • @stemartin6671
    @stemartin6671 3 года назад

    Where do you get the prime tool from?
    And do these need resetting?

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад +1

      www.118ink.com/shop/hp-hewlett-packard/premium-refill-tool-for-hp-black-ink-cartridges/

    • @stemartin6671
      @stemartin6671 3 года назад

      @@Theinkrefillexperts thanks buddy what a out the reset- is it needed for the 302/302 xl?

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад +1

      No need to reset, you can refill them with no issue.

    • @stemartin6671
      @stemartin6671 3 года назад +1

      @@Theinkrefillexperts excellent I’ll be ordering a refill kit from your site then brilliant stuff bud cheers!

    • @Theinkrefillexperts
      @Theinkrefillexperts  3 года назад +1

      You are very welcome

  • @DaDARKPass
    @DaDARKPass 6 лет назад +1

    interesting video

  • @VillainGang.
    @VillainGang. 6 лет назад

    nice deal is right now buy one, second free . But how to reset that bloody cartridge ???

    • @Theinkrefillexperts
      @Theinkrefillexperts  6 лет назад +1

      Hello , you can refill the cartridges no problem and they will work. You can’t reset the Ink level on the printer , but this does not matter because after refilling your cartridges you are saving lots of £££ or $$$$ or €€€€ 😀

    • @Billzloveschelsea
      @Billzloveschelsea 4 года назад

      @@Theinkrefillexperts That's really annoying if you can't see the ink level on the printer. 🤦‍♂️

    • @Theinkrefillexperts
      @Theinkrefillexperts  4 года назад

      I have to disagree because you are saving so much money by refilling.
      It’s £20 on average in the uk for a black ink cartridge but you can refill yours with our kit for under £3

    • @Billzloveschelsea
      @Billzloveschelsea 4 года назад

      @@Theinkrefillexperts What's the cost to buy the inks and the cost for the ink injection? My printer has finished and that's why I'm looking to refill my own as the inks online are far too overpriced.

    • @VillainGang.
      @VillainGang. 4 года назад

      Over a year I using this ink. And truly I think is amazing. My usage is small (cca 500sheets per month and if I need refill I refill and save money. Just have to bring to attention I have to use original cartridges and not reused sold as Asda. Otherwise reset need be manually and time consume. Even with orig I can not see on printer ink level but when I waste up to 20 pages per month with shade print I don't mind. I am very happy for this ink.

  • @FlorinHulpoi
    @FlorinHulpoi 5 лет назад +1

    Hp:-Stonks

    • @Theinkrefillexperts
      @Theinkrefillexperts  5 лет назад

      What do you mean ?

    • @FlorinHulpoi
      @FlorinHulpoi 5 лет назад

      It was a meme, I was referring to the fact that if all people would do this, the HP company would have less revenue