Is it possible to just get the Quick Connect Harness? Mine broke during installation but I can't order another one since it's not listed on the website. Thanks!
If i install the C-Light Limited Harness, do I cut off the fuse on the Subispeed DRL fog light harness and quick connect the red wire to the C-light harness red wire?
What is that filling in your tow hook area? It looks like it would allow for a relocation kit to fit in there while having the ets intercooler with no crash bar
Does anyone know how to connect harness to turn the bezel on when c light is on? I connected the harness to 15A fuse insert (for c light) and it works. However, bezel led wouldn't turn off when I turned off the c light.
I have the JDM bezels you released first, and the LED bars are terrible especially during the day. Can I just order new LED strips, either yours or OLMs, and remove the JDM one and plug the new ones in?
Great video! I have the subispeed bezel and need some help. i have two add a fuses going to the low and high beam fuses in the fuse box and for some reason it makes my headlights stay on in drl mode. help anyone?!?!
just got my fog light bezels this week they look amazing just check out some install videos I'm going to use the regular wiring harness people are saying plug the fuse in the low beam you say the high beam spot does it matter can you clear this up for me thanks. i wont the bezels to stay on when using high and low beam
Not sure what you mean by this. I assume you would want the LED to come on with another light function? Lets say the low beams? All you would need to do is splice into the low beam signal power to have the bezels come on when your low beams are active. Hope that answers your question.
Kevin I love. Your videos. But do you. Always speak like. That or do. You do it. For the videos? :) Great install videos I am not complaining you speak clear and simple...Could you do one for the the reverse camera?
No, for a your car we'd recommend these: www.subispeed.com/part/a-70077-1bun-parent-olm-facelift-jdm-style-drl-sequential-turn-signal-bezel-no-fog-hole#.YOW9hOhKirw
I disabled my high beam drl and just ordered this kit do I still need to plug that add a fuse to the same location? I currently do no have the drl Harness. I just bough the subispeed bezels with the quick harness
SubiSpeed and this white wire I understand it's for turning off the bezel light. How would I connect it to receive a signal from the high beam? Sorry for the stupid question but I can most likely figure it out I just prefer doing it the right way
What I would LOVE is a set that is body color, or is delivered in a more paintable state.
Is there 2018+ version with both the turn signal cut outs and fog light cut out?
will you be releasing a 2018+ version?
What number is the orange Fuse?
Is it possible to just get the Quick Connect Harness? Mine broke during installation but I can't order another one since it's not listed on the website. Thanks!
If i install the C-Light Limited Harness, do I cut off the fuse on the Subispeed DRL fog light harness and quick connect the red wire to the C-light harness red wire?
What is that filling in your tow hook area? It looks like it would allow for a relocation kit to fit in there while having the ets intercooler with no crash bar
Do you have a install video on the forester bumper vent lights ?
Am I able to just buy the harnesses? I have a set of oem s4 bezels.
Does anyone know how to connect harness to turn the bezel on when c light is on? I connected the harness to 15A fuse insert (for c light) and it works. However, bezel led wouldn't turn off when I turned off the c light.
Why you don’t provide subaru legacy 2015+ after market parts ??
Does this fit 2020 wrx?
There was a GCS branded version before. Is it the same as the Subispeed one?
Could you please do an install on the new switch back bezels?
how can i get my bezel to go on with my drl light?
Hi bud a they water proof any returns on this factor just wondering
Hi there which one of these works on Australian 2016 STIs?
another great video subispeed.
John Nguyen those are the ones I waited for months
jaime carrasco those are sick!
John Nguyen yea the 4 month wait lol
Do your WRX products fit Japanese built models? Thanks
Do these fit 2018 model wrx?
hi! i have WRX 2017 from the philippines. Does the wiring harness fits?
I’m looking for a similar kit for the 2018 legacy, any plans?
I have the JDM bezels you released first, and the LED bars are terrible especially during the day. Can I just order new LED strips, either yours or OLMs, and remove the JDM one and plug the new ones in?
Ali Al-Qahtani
Great video! I have the subispeed bezel and need some help. i have two add a fuses going to the low and high beam fuses in the fuse box and for some reason it makes my headlights stay on in drl mode. help anyone?!?!
Just ordered a set of Subispeed bezels :D should complete the look with the Grill craft grills
just got my fog light bezels this week they look amazing just check out some install videos I'm going to use the regular wiring harness people are saying plug the fuse in the low beam you say the high beam spot does it matter can you clear this up for me thanks. i wont the bezels to stay on when using high and low beam
throwingpat s did you get them to stay on with the low beams? I want to try doing the same.
Will I need another harness if I already have the subispeed c light as drl harness?
Anthony Zupanek no
How do you connect these if you DO have the Subispeed DRL harness. I am completely lost.
Cant wait to order the fog light Bezels! SO nice! Would love to order the LED lights but a bit pricey for a light lol
Do I still need the buy the subispeed c light harness to make this and the c light turn on together as drl?
Yes, that would be the easiest way.
would it be possible to get these without a drl function ?
Not sure what you mean by this. I assume you would want the LED to come on with another light function? Lets say the low beams? All you would need to do is splice into the low beam signal power to have the bezels come on when your low beams are active. Hope that answers your question.
which do you recommend to match the OEM headlights? JDM or Subbiespeed ones?
The Subispeed version matches the OEM LED headlights found on limited models very well!
will be ordering soon!!
what lip is on the wrb wrx? seibon?
www.subispeed.com/2015-subaru-wrx/exterior/front-lips-diffusers/carbon-reproductions-sujin-front-lip-2015-wrx-2015-sti#.WCneWi0rKrw
What offset wheels are they?
18x9.5 +38
Do these fit on the 2018 model?
No these do not.
great right after I ordered the $500 one with 4 shity leds i see this how nice 😒
Kevin I love. Your videos. But do you. Always speak like. That or do. You do it. For the videos? :) Great install videos I am not complaining you speak clear and simple...Could you do one for the the reverse camera?
I would buy them if they had a carbon fiber finish
I spy another unreleased product. :)
what is it? message me because I have a guess also!
RetiefGoosen Look at the hood scoop. :)
My WRX Channel Yup haha
Subispeed ones look amazing, I can do a review on my channel! ;)
lol I sent an email about installing I wonder how many email u got
Jdm one is better OLM is just a way cheaper version.
Will these fit a 2019 Sti
No, for a your car we'd recommend these: www.subispeed.com/part/a-70077-1bun-parent-olm-facelift-jdm-style-drl-sequential-turn-signal-bezel-no-fog-hole#.YOW9hOhKirw
I disabled my high beam drl and just ordered this kit do I still need to plug that add a fuse to the same location? I currently do no have the drl Harness. I just bough the subispeed bezels with the quick harness
Yes, go into the fuse location for the high beam. It will still be active for DRL.
SubiSpeed and this white wire I understand it's for turning off the bezel light. How would I connect it to receive a signal from the high beam? Sorry for the stupid question but I can most likely figure it out I just prefer doing it the right way
I did it this way and the bezel turns off when my low beams switch on.