How much would you sell those for or how much is it worth to sell. Not that I’m gonna buy it. But where would you put a value on it if you had the ability to mass produce them hypothetically
Simple Math Arcade1up Cab - 350 PC Used Low Budget- 200 / High-End 350 Encoderboards - 70 Joysticks Sanwa - 55 Buttons China - 30 Monitor PCB - 30 Logitech Sub-Woofer Used - 25 Wall Socket Strip - 5 Keyboard & Mouse - 25 Small Materials - 15 Around The 805 euro will it cost to make machine like this. high end pc makes it more expensive that would be around 905 euro. Maybe you can get some parts cheaper ... this will give you an idea only cost for the parts.
I'm building an arcade from the floor up like this using older parts, except using a 2500k/gtx 970 and 1080p monitor to play stuff like injustice, Tekken 7, Soul Calibur 6 and other newer fighters
There's plenty diy cab Videos out there. I'm not much for making Videos myself. if you're gonna use a crt use an old (most modern possible with S-Video out)GPU like Radeon hd4000 series or something, that was my cheapest option to make a Gun Cab that plays Hogan's to even time Crisis 4. I'm just a hobby builder so I don't have any tutorials but I'm sure there's plenty out there
I've got a 1992 orignal Street fighter 2 ce cab and Pandora works just fine with the cabs CRT, I've got Pandora dx which supports multiple resolutions over hdmi and vga it also supports 15khz standard res CRT monitors, displays absolutely perfectly on my cab, you will have to adjust the monitors vhold though otherwise the picture will roll out of the box and other fine adjustments on the horizontal and vertical to fill the screen as it displays slightly wider and longer than standard jamma, works good though very happy with my Pandora dx and it supports stereo sound through the audio jack perfect for an amp which my cab is kitted out with 2 speakers and a sub and a Q Sound amp.
I'm on the fence about pandoras box or rasberry pi. I've read alot of reviews which said pandora has mor lag on the games and is just lower quality. What are your thoughts on this?
Wauw !! Je brengt me weer op ideeën.. inspireren die je mij zeker !! Jou video's van de de aiwo G1000 7 inches en de jxd heeft mij getriggert om hem te kopen uit China.. De jxd natuurlijk!!! I love it !! Ik kijk regelmatig nog méér video's en ik ben helemaal weg van de games , consoles en jou durf om deze machine in huis te halen.. 🤩
Hey Sanne, Probeer beetje door de bergen spullen heen te graven om te kijken welke de moeite waard zijn. Kortom als je retro gamer ben als ik tja dan is er veel in China te vinden 😄
I have a similar setup thanks to your older tutorials. 🙂👍 I even bit the bullet and imported the 80 euro light up Marquee from the official Arcade1up site Just need the lower button panel like the one you have to add coin buttons. I used x360ce for each pc game that needed xinput. Also the Gamma setting switched to on helps with monitor looking washed out and improves viewing angles. Overall the arcade housing works out way cheaper than getting a custom full size cab with no monitor or cab art.
@@WickedGamerCollector Exactly 🙂. If I were to do it again I would definitely use the xinput encoders like you have in this latest build avoid a bunch of headaches. Also Launchbox looks great! It would be great to have a video on how you set it up. I'm using Steam Big Picture and this looks like a much more streamlined option.
Did something similar but decided to go with a mini pc with a ryzen 5800. Less power consumption, more compact and just enough power to run all games nicely. Then you connect it to a smart plug and your machine switches on with a voice command.
Mate your timing is perfect picking up a Pandora's box arcade machine tomorrow and although I'm really looking forward to it I want to upgrade with my old pc. It's the Same as yours! Hahaha. Everything you mentioned is everything I've been going over myself! Brilliant. This will help no end! And yeah, you can run model 3, PS2, GameCube, Dreamcast and a host of arcade awesomeness with that set up. Have been doing so for years, hence why I never upgraded! Subscribed man. Great videos! Ps. Maybe add some Sindel lightguns next eh? 😉
A buddy of mine just made one he thought buy an pandorabox. Just saved him from that and advised a pi4. And now all games work fine until dreamcast. This onr is hanging on the wall. About a year ago i have made one of my own from scratch with old parts and slapped i a pi 3. Some stickers from pacman. Some lights from and different parts from action and ali. And you are done. And some time for making and assembling. But i think ee all got time now adays. 😀😀😃🤣🤣
Awesome build! If you wanna save money on the frontend check out Retrobat. It's free and easier to set up than Big box. Basically it's Batocera for Windows. Of course there's also the coinops builds of Retro Fe as well which you just download and start playing. However making changes to those builds is a big pain if you want to.
Is there a fix for sound with Retrobat? I've run it and I only get sound for the video's, but the games never have sound. Speaking about running it in Windows 8.
Currently playing Cave Shmups on a vertical monitor using Mame64 on PC. One day i'll add it to a cabinet. There seems to be a close emulator "Controller automation" (Emulates pressing ESC) in launch/big box. But i couldn't find the feature, so just configured Mame64 to exit on a specific button press
Nice job, just ordered a MK2 A1U and was thinking of doing something similar and found your video. I have a 4770K on an MATX board with tons of RAM and a 1660 TI and a SFX 450W PSU just sitting around from a build I was going to do. Thinking that will make a great build for one of these. Once I verify the LCD I'll order the LCD Board and the button/sticks/controller. Was thinking of re-using existing buttons/joysticks, but will probably keep those and PCB pristine and buy a kit from amazon. One question: How did you secure the GPU without a case? it wasn't clear from your video.
WOW!!! that is an awesome build, I wouldn't know how to build this from scratch, looks complicated. where can I buy this? I'm in research phase right now, and this has been the best setup I've seen, Can you build one of these for me? If yes, How much? i'm in new york.
Awesome!!! vid is out :D thumbs up even before start watching hahaha EDIT (after watching vid): Wow that's an awesome mod, If I ever get myself to buy and mod one, ill definitely do something similar, I love launchbox, its a great product and also one of the best companies when dealing with customers! not to mention you can probably link even a myspace account if it had games on it lol. I already have a project in my mind, just need money and some stable living situation lol, but would like to have 2 cabinets, 1 like the one you moded basically an emulation monster with all the retro arcade goodies (no fancy new games tough :P ) probably a pi 4 would be more than enough power for it, and 1 dedicated for more "modern" fighting games (big fan of them since I got my hands of a brand new SF II for the snes when I was a kid) linking my steam account to launchbox plus adding some arcade/console games to fill the gaps to have semi or complete fighting game series like killer instinct, marvel vs capcom, blazblue, MK, street fighter, KOF, guilty gear and such, specially guilty gear, I am just such a fanboy of that franchise, might as well add up another cabinet to my wish list and mod a dedicated one solely for that franchise. Epic vid man!!
Bij welke winkel kan je die witte voetjes krijgen? Waar jij het moederbord opschroeft En wat is de Nederlandse benaming ervoor? Want ik wil dat ook doen met mijn arcade kast maar ik weet niet hoe het heet.
use something like HP 705 Mini with ryzen graphics. Its similar to running a rx550. It can play everything under PS3 except switch, it can play some ps3 as well though. you an get for $100
Hello there. Awesome job on the machine. I was going to make one of these for my father sometime this winter as an upgrade from his raspberry pi. He's not good with Linux and it's hard to work on the pi remotely, so I'm thinking a windows PC based one will be better. I have a few questions if you have time to answer them?
To get a couple of the 360 encoders is going to cost me about £60 delivered, any reason why I shouldn’t just get an iPac ultimate for a few quid more ?
This is an awesome looking project. I am about to undertake something very similar. I was wondering if you ran into any issues with the Playstation or Nintendo consoles when only having 6 buttons to map? Did you have to omit shoulder or trigger buttons?
You can play some games only not all of them. So you need 8 buttons in the end. And even more than 8 if you want to play stuff like, DC, Game Cube .. PS2 etc etc..
@@WickedGamerCollector yeah I figured as much. I have some 12mm MDF board, so I'm going to try a two-player - 8 button layout. Thank you for the heads up and keep up the good work!
Dumb question, is the Tekken series compatible with the hardware? Notably Tekken 2,3. Edit: Oh wait, like a minute in there was Tekken Tag footage. I'm sold!
For Windows... yes .. pi i don't know for sure. Super Console X we posted a video on that. Don't know if this works the same on the pi. This video - ruclips.net/video/UTc4jiCQp_A/видео.html&ab_channel=TheWickedGamer
I've always wanted to get one of those just for this purpose someday I got to find one for cheap price. I'm hoping I can find a used one for a hundred bucks someday and use that but got to keep waiting it'll happen sooner or later honestly I'll probably end up building my own before that happens lol
Totaal 3 dagen .. waarvan 2 dagen werken aan de software en 1 dag voor te bouwen. Even een snelle greep.... Arcade1up Cab - 350 PC Used Low Budget- 200 / High-End 350 Encoderboards - 70 Joysticks Sanwa - 55 Buttons China - 30 Monitor PCB - 30 Logitech Sub-Woofer Used - 25 Wall Socket Strip - 5 Keyboard & Mouse - 25 Small Materials - 15 805 euro voor een budget build. 905 pleuro met hign end game pc er in.
I don't know for sure I bough them on ali-express some time ago. www.aliexpress.com/item/1005002864891552.html?spm=a2g0o.productlist.main.1.61326624vBDBOp&algo_pvid=887f4326-457a-4044-8010-d6a30fa0bed2&algo_exp_id=887f4326-457a-4044-8010-d6a30fa0bed2-0&pdp_npi=4%40dis%21EUR%211.19%210.71%21%21%211.27%21%21%4021038edc16913617329693803e07bc%2112000022517755326%21sea%21NL%21117384667%21&curPageLogUid=HBILpNrwBXL3
Just build it from scratch. Like i did. Slap in a pi3 or 4. An old monitor 19 inch 4:3 aspectratio. Buy the buttons and board of your liking. Some old pc speakers. Or an old 2.1 set. And you are set. Maybe arround 250 to 300 euro. About 900 tl. Should be cheaper than buying a arcade 1up and modify it.
I was really, really lucky that I bought that SF2 cabinet in discount price at a toy store that went to bankrupt. Right now, my latest project is to add a LCD Marquee to my modded cabinet. I highly recommend to get VSDISPLAY 14.9" LCD monitor with a kit and build a mounting frame for it.
Thanks Joost... ook jij kan zo iets maken. Koop een gebruikte arcade1up.. op ali aantal parts.. Oude pc er in .. en hatseflats... gaan met die banaan 👌
I'm not a fan of these one up arcade cabinets, the graphics on these cabinets look pretty dull and plain, I prefer the custom ones of Daniel Spies, world of difference in looks. Im also not touching raspberrypie's anymore! the retropie software is so buggy. Tried everything getting a simple 8bitdo SN30 controller to work, but nope! open a game and the connection is lost. No solution available in forums either. And that's just one of the many issues. So I'm not touching that crap anymore. Just as you prefer the pc solution, I'm all for it aswell
Or visit Epic every other week... they hammered out some phantastic games for free. Since i use Linux (GamerOS), i can also confirm that it is usable if you don't want to take the Windows route.
Arcade1up with PC i don't make those on order. Just wanted to mess around with this and to show what you can do. You can do this with every Arcade machine if you ask me. Did see some ali-express sellers have empty cabinets. So you can mod crazy with those 😁
How much would you sell those for or how much is it worth to sell. Not that I’m gonna buy it. But where would you put a value on it if you had the ability to mass produce them hypothetically
Simple Math
Arcade1up Cab - 350
PC Used Low Budget- 200 / High-End 350
Encoderboards - 70
Joysticks Sanwa - 55
Buttons China - 30
Monitor PCB - 30
Logitech Sub-Woofer Used - 25
Wall Socket Strip - 5
Keyboard & Mouse - 25
Small Materials - 15
Around The 805 euro will it cost to make machine like this.
high end pc makes it more expensive that would be around 905 euro.
Maybe you can get some parts cheaper ... this will give you an idea only cost for the parts.
Cheers WG&C, awesome build my man. :)
Thanks 😏
I'm building an arcade from the floor up like this using older parts, except using a 2500k/gtx 970 and 1080p monitor to play stuff like injustice, Tekken 7, Soul Calibur 6 and other newer fighters
Before i heard new fighters, i was gonna say use a crt monitor
Are you done ? You got a tutorial on that?
There's plenty diy cab Videos out there. I'm not much for making Videos myself. if you're gonna use a crt use an old (most modern possible with S-Video out)GPU like Radeon hd4000 series or something, that was my cheapest option to make a Gun Cab that plays Hogan's to even time Crisis 4. I'm just a hobby builder so I don't have any tutorials but I'm sure there's plenty out there
@@Glitchy24 thanks. Im.a hobby builder as well . I just bought a mortal kombat legacy cab and wanted to add trilogy - tekken 5 , street fighter 4
I seen Cuphead and was so excited!!! Love that game! Cool build!
Pretty sweet,I’m building my own gaming set up.already installed “Steam”worth to get and more is coming...
I've got a 1992 orignal Street fighter 2 ce cab and Pandora works just fine with the cabs CRT, I've got Pandora dx which supports multiple resolutions over hdmi and vga it also supports 15khz standard res CRT monitors, displays absolutely perfectly on my cab, you will have to adjust the monitors vhold though otherwise the picture will roll out of the box and other fine adjustments on the horizontal and vertical to fill the screen as it displays slightly wider and longer than standard jamma, works good though very happy with my Pandora dx and it supports stereo sound through the audio jack perfect for an amp which my cab is kitted out with 2 speakers and a sub and a Q Sound amp.
I'm on the fence about pandoras box or rasberry pi. I've read alot of reviews which said pandora has mor lag on the games and is just lower quality. What are your thoughts on this?
Kudos wicked PC is head and shoulders above pi and pandora but like you said you need the know how and the patience of a saint 😅
Wauw !! Je brengt me weer op ideeën.. inspireren die je mij zeker !!
Jou video's van de de aiwo G1000 7 inches en de jxd heeft mij getriggert om hem te kopen uit China.. De jxd natuurlijk!!!
I love it !! Ik kijk regelmatig nog méér video's en ik ben helemaal weg van de games , consoles en jou durf om deze machine in huis te halen.. 🤩
Hey Sanne, Probeer beetje door de bergen spullen heen te graven om te kijken welke de moeite waard zijn. Kortom als je retro gamer ben als ik tja dan is er veel in China te vinden 😄
I have a similar setup thanks to your older tutorials. 🙂👍
I even bit the bullet and imported the 80 euro light up Marquee from the official Arcade1up site
Just need the lower button panel like the one you have to add coin buttons.
I used x360ce for each pc game that needed xinput.
Also the Gamma setting switched to on helps with monitor looking washed out and improves viewing angles.
Overall the arcade housing works out way cheaper than getting a custom full size cab with no monitor or cab art.
Question remains what is easier... get the x360ce emulator.
Or get a encoder like mine ?
@@WickedGamerCollector Exactly 🙂.
If I were to do it again I would definitely use the xinput encoders like you have in this latest build avoid a bunch of headaches.
Also Launchbox looks great! It would be great to have a video on how you set it up. I'm using Steam Big Picture and this looks like a much more streamlined option.
Did something similar but decided to go with a mini pc with a ryzen 5800. Less power consumption, more compact and just enough power to run all games nicely. Then you connect it to a smart plug and your machine switches on with a voice command.
Thank you. This was a great synthesis of your knowledge.
I have my SF2 Arcade 1UP still new here. I might try to rebuild it as something like this. I love the look and the choice of games that are possible.
Mate your timing is perfect picking up a Pandora's box arcade machine tomorrow and although I'm really looking forward to it I want to upgrade with my old pc. It's the Same as yours! Hahaha. Everything you mentioned is everything I've been going over myself! Brilliant. This will help no end! And yeah, you can run model 3, PS2, GameCube, Dreamcast and a host of arcade awesomeness with that set up. Have been doing so for years, hence why I never upgraded! Subscribed man. Great videos!
Ps. Maybe add some Sindel lightguns next eh? 😉
That's for going over the details, you did a great job and certainly inspired me to look at doing something.
Very impressive mod and well done Wicked.
Great job buddy love it
Thanks Sonic Love ! 👌
The only downside to using a PC is your Arcade1up cabinet will sound like a vacuum cleaner.🤣
i7 9700 PC in mine.
Great video.
Not really yo be honest i used all silent fans 😏
Nice video, any especific reason you choose lunchbox instead of another emulator something like hyperspin??
The easy going for Launchbox is just 1.2.3 setup.
Hyperspin is more hassle to begin with.. I will get it to work only takes me more time.
A buddy of mine just made one he thought buy an pandorabox. Just saved him from that and advised a pi4. And now all games work fine until dreamcast. This onr is hanging on the wall. About a year ago i have made one of my own from scratch with old parts and slapped i a pi 3. Some stickers from pacman. Some lights from and different parts from action and ali. And you are done. And some time for making and assembling. But i think ee all got time now adays. 😀😀😃🤣🤣
Arcade1up say's: "when i grow up i want be be a real machine", Well Done Alphon the Wicked.!
excellent video, really enjoyed the way you presented that.
Thanks 🙌
Awesome build! If you wanna save money on the frontend check out Retrobat. It's free and easier to set up than Big box. Basically it's Batocera for Windows. Of course there's also the coinops builds of Retro Fe as well which you just download and start playing. However making changes to those builds is a big pain if you want to.
Is there a fix for sound with Retrobat? I've run it and I only get sound for the video's, but the games never have sound. Speaking about running it in Windows 8.
@@KaraokeDuov2 I had to change the audio drivers in retroarch. I forget what I changed it to but changing gave me in game sound.
You make the best videos and you are so positive and likeable! My favorite channel
Awesome mod there 😎 👍 👍! !
Incredible!
Great build! Groetjes uit Den Haag
Are there any high quality CRT filters available that emulate pixel bleeding properly? Also, do your arcades accept quarters? :D
Awesome job 👍👍
Great video, love it 😍 🕹
Thanks Arcade Master 👌
Great video!
Currently playing Cave Shmups on a vertical monitor using Mame64 on PC. One day i'll add it to a cabinet.
There seems to be a close emulator "Controller automation" (Emulates pressing ESC) in launch/big box. But i couldn't find the feature, so just configured Mame64 to exit on a specific button press
Good ol' devil boy
Nice job, just ordered a MK2 A1U and was thinking of doing something similar and found your video. I have a 4770K on an MATX board with tons of RAM and a 1660 TI and a SFX 450W PSU just sitting around from a build I was going to do. Thinking that will make a great build for one of these. Once I verify the LCD I'll order the LCD Board and the button/sticks/controller. Was thinking of re-using existing buttons/joysticks, but will probably keep those and PCB pristine and buy a kit from amazon.
One question: How did you secure the GPU without a case? it wasn't clear from your video.
Nice work Wicked! What's the cool retro song in your intro?
WOW!!! that is an awesome build, I wouldn't know how to build this from scratch, looks complicated. where can I buy this? I'm in research phase right now, and this has been the best setup I've seen, Can you build one of these for me? If yes, How much? i'm in new york.
This was really epic video
Thanks buddy ! 😅
Spend 2 days building... 1 day editing 😅
@@WickedGamerCollector The quality of your videos is excellent and the content always very interesting
17:36
....SOLD
Awesome!!! vid is out :D thumbs up even before start watching hahaha
EDIT (after watching vid): Wow that's an awesome mod, If I ever get myself to buy and mod one, ill definitely do something similar, I love launchbox, its a great product and also one of the best companies when dealing with customers! not to mention you can probably link even a myspace account if it had games on it lol.
I already have a project in my mind, just need money and some stable living situation lol, but would like to have 2 cabinets, 1 like the one you moded basically an emulation monster with all the retro arcade goodies (no fancy new games tough :P ) probably a pi 4 would be more than enough power for it, and 1 dedicated for more "modern" fighting games (big fan of them since I got my hands of a brand new SF II for the snes when I was a kid) linking my steam account to launchbox plus adding some arcade/console games to fill the gaps to have semi or complete fighting game series like killer instinct, marvel vs capcom, blazblue, MK, street fighter, KOF, guilty gear and such, specially guilty gear, I am just such a fanboy of that franchise, might as well add up another cabinet to my wish list and mod a dedicated one solely for that franchise.
Epic vid man!!
Thats one Wicked mod ..👍👍
Thanks 🙌
Bij welke winkel kan je die witte voetjes krijgen? Waar jij het moederbord opschroeft En wat is de Nederlandse benaming ervoor? Want ik wil dat ook doen met mijn arcade kast maar ik weet niet hoe het heet.
I always see videos like this, but i never see any video creators say what one is "THE" best emulation unit.
use something like HP 705 Mini with ryzen graphics. Its similar to running a rx550. It can play everything under PS3 except switch, it can play some ps3 as well though. you an get for $100
Hello there. Awesome job on the machine. I was going to make one of these for my father sometime this winter as an upgrade from his raspberry pi. He's not good with Linux and it's hard to work on the pi remotely, so I'm thinking a windows PC based one will be better. I have a few questions if you have time to answer them?
Nice job wicked my dude top mod
Shove a Mister in there!👍👊
That would give a awesome arcade experience 🤔
I felt naughty getting a True blue playstation classic stick from China but not anymore
To get a couple of the 360 encoders is going to cost me about £60 delivered, any reason why I shouldn’t just get an iPac ultimate for a few quid more ?
I need one of these in my life❤
thank you for sharing👍 my friend😊
I see you were playing tmnt arcade version is that game on the pandora box
Very nice machine. Have you noticed it's becoming an addiction. I keep wanting to add on and make changes.
I want to this but i just want arcade fighting games.
Very Nice! Have you played with CoinOPS at all? I used that on my build and it looks pretty sweet.
Nope...did see it.. tutorials etc.
Wanted to play around with launchbox / big box.
Did try Hyperspin... did not like that.
Wow, fine mod
This is an awesome looking project. I am about to undertake something very similar. I was wondering if you ran into any issues with the Playstation or Nintendo consoles when only having 6 buttons to map? Did you have to omit shoulder or trigger buttons?
You can play some games only not all of them.
So you need 8 buttons in the end.
And even more than 8 if you want to play stuff like, DC, Game Cube .. PS2 etc etc..
@@WickedGamerCollector yeah I figured as much. I have some 12mm MDF board, so I'm going to try a two-player - 8 button layout. Thank you for the heads up and keep up the good work!
This is really cool. Thankjs
Dumb question, is the Tekken series compatible with the hardware? Notably Tekken 2,3. Edit: Oh wait, like a minute in there was Tekken Tag footage. I'm sold!
Will this work for the turtles in time 4 player cabinet? They're selling me one mint in 180 dlrs
Definitely worth $1000!
Man, thats a sweet setup.
Would like something like that but I dont have the skills plus my wife would kill me I think xD
夢がある組み合わせですね
do you know how to use sensor bar and wii mote with retropie pi4 and arcade 1 up ?
For Windows... yes .. pi i don't know for sure.
Super Console X we posted a video on that.
Don't know if this works the same on the pi.
This video - ruclips.net/video/UTc4jiCQp_A/видео.html&ab_channel=TheWickedGamer
@@WickedGamerCollector thanks i watch now
I bought a 2011 GTX570 for 30 euro on marktplaats a month ago!
570 is even better... awesome ! 🦾
Arcade1up arcade mod with a pc that play pc games and powerful emulators i like that
have you try run ps3 or nintendo swich emulator
I've always wanted to get one of those just for this purpose someday I got to find one for cheap price. I'm hoping I can find a used one for a hundred bucks someday and use that but got to keep waiting it'll happen sooner or later honestly I'll probably end up building my own before that happens lol
Wauw, cool! Hoe lang ben je hier wel niet mee bezig en hoeveel kost het om alles te maken 😅
Totaal 3 dagen .. waarvan 2 dagen werken aan de software en 1 dag voor te bouwen.
Even een snelle greep....
Arcade1up Cab - 350
PC Used Low Budget- 200 / High-End 350
Encoderboards - 70
Joysticks Sanwa - 55
Buttons China - 30
Monitor PCB - 30
Logitech Sub-Woofer Used - 25
Wall Socket Strip - 5
Keyboard & Mouse - 25
Small Materials - 15
805 euro voor een budget build.
905 pleuro met hign end game pc er in.
@@WickedGamerCollector dat valt mij nog reuze mee eigenlijk! Nice job!
whered you get those angled motherboard mounts?
I don't know for sure I bough them on ali-express some time ago.
www.aliexpress.com/item/1005002864891552.html?spm=a2g0o.productlist.main.1.61326624vBDBOp&algo_pvid=887f4326-457a-4044-8010-d6a30fa0bed2&algo_exp_id=887f4326-457a-4044-8010-d6a30fa0bed2-0&pdp_npi=4%40dis%21EUR%211.19%210.71%21%21%211.27%21%21%4021038edc16913617329693803e07bc%2112000022517755326%21sea%21NL%21117384667%21&curPageLogUid=HBILpNrwBXL3
Can this be done on the newer Deluxe version?
how you are going to deal with the dust ?
Dust what is that ? 😜
Just kidding... if really needed I can clean it.. open up the back if needed.
Can you still play online after you perform the Rasberry PI mod?
RIP raspberry pi affordable sbc
Can't you daisychain 40 raspberry pi boards together?
superb !
Anyone you can tell me is all the Mortal Kombats for PS2 run smoothe on the pi4?
Very awesome
I want this machine but too expensive for turkey
Just build it from scratch. Like i did. Slap in a pi3 or 4. An old monitor 19 inch 4:3 aspectratio. Buy the buttons and board of your liking. Some old pc speakers. Or an old 2.1 set. And you are set. Maybe arround 250 to 300 euro. About 900 tl. Should be cheaper than buying a arcade 1up and modify it.
Should of brushed out the dust from that huge heat sync bro.
I already did that ... did not record that was my mistake 😅
满满的回忆，视频做得不错。
I was really, really lucky that I bought that SF2 cabinet in discount price at a toy store that went to bankrupt. Right now, my latest project is to add a LCD Marquee to my modded cabinet. I highly recommend to get VSDISPLAY 14.9" LCD monitor with a kit and build a mounting frame for it.
If you can pick it up for couple of dollars it's worth it. LCD marque ow that is awesome 😏
Nice GG
OMG 😱😱❤👀👍
Jaloers, wat een epic machine !
Thanks Joost... ook jij kan zo iets maken.
Koop een gebruikte arcade1up.. op ali aantal parts..
Oude pc er in .. en hatseflats... gaan met die banaan 👌
Man
How many of them you owns
👍👍
I would definitely add some support for the GPU. Graphic cards really shouldn't be held in place by just the PCIe connector...
How about putting in a crt into this.
This cabinet is build with a very thin material.. i don't think that is a good idea 😨
@@WickedGamerCollector it would be cool. Not a big fan of LCD.
I'm not a fan of these one up arcade cabinets, the graphics on these cabinets look pretty dull and plain, I prefer the custom ones of Daniel Spies, world of difference in looks. Im also not touching raspberrypie's anymore! the retropie software is so buggy. Tried everything getting a simple 8bitdo SN30 controller to work, but nope! open a game and the connection is lost. No solution available in forums either. And that's just one of the many issues. So I'm not touching that crap anymore. Just as you prefer the pc solution, I'm all for it aswell
any chance to give us your Windows game list?
LOL... i connected my Steam to the PC / Big Box list. 😆
Get a steam account wait for a sale and go crazy .. game will be dirty cheap.
@@WickedGamerCollector I mean list titles of your windows game's over launchbox ...
Or visit Epic every other week... they hammered out some phantastic games for free. Since i use Linux (GamerOS), i can also confirm that it is usable if you don't want to take the Windows route.
I just use launchbox
ziet er we goed uit
say wicked family
How much would you charge me for a machine like that?
Arcade1up with PC i don't make those on order.
Just wanted to mess around with this and to show what you can do.
You can do this with every Arcade machine if you ask me.
Did see some ali-express sellers have empty cabinets.
So you can mod crazy with those 😁
i smell netherlands
You have a good nose 😅
Wow que epico
Is there an email I can contact you on for more information on this please?
Best thing is to send me a PM on twitter.
twitter.com/PromotionWicked
😃😃😃👍👍👍😁❤️