Sir . I got bizhub c35p and i have a problem with printing after refilling toner . The printout color especially cyan and magentic have spots and color disforming . How can i solve this . Thanks alot
Minolta 165 e. From some days irritating squeaking sound from running copier. Is transfer roller touching the drum? Or from dp or toner unit gears problem? 😢😢
Unfortunately, you'll have to find it yourself. Not one solution. Encorajo os espectadores a apoiar meu canal: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin Vídeos apenas para apoiadores: ruclips.net/p/UUMOOHtXTtGHj33pUm8Gf2FH3A
thanks. After calibration, the transfer roller is dirty again. Transfer belt is new. Roller > 100.000 prints on a magicolor 5570. What can be the reason? I have vertical grey smudges both front and back of paper. Many thanks.
I having problem which is that papers are constantly getting jammed in the side compartment can this be fixed my printer is a konica minolta bizhub c200 Any response is appreciated
First, replace with new ones or wash the paper pick rollers in the paper cassette. If the rollers are worn out, the paper arrives late at the sensor on the side of the copier, causing a paper jam. Thank you and I invite you to watch other videos about repairing copiers and printers.
Sir good information sir we have konica minolta c224e model when I print 12x18 sheet in the background magenta color very light also printimg and 4 inch in the middle aria color discolour printing what is the solution sir/ please reply sir
i have a konica c360 and it works fine for a day, then next day colors are wrong sometimes there is too much cyan other times too much magenta, and then after a day it works again just fine, its been more than a week since its been alternating between working just fine and getting colors wrong. any idea what could cause this ???
@@MrRicoh thank you are right, must be the developers, i'll be replacing them soon. also it gets some fading vertical straight lines on the first two to four pages whenever i start copying or printing. do you think its because of the transfer belt cleaning blade or something else ?? also seems like the transfer roller gets dirty a lot.
@@MrRicoh here some feedback, i did replace the transfer belt cleaning blade and everything got better, now the copies are all clear and all the color problems are resolved. i don't think i will be replacing the developing unit anytime soon.
You probably have your developers worn out so you need to replace them. Fortunately, there are plenty of replacements out there, so repairing shouldn't be expensive. 😄 😁 😆 Start supporting this channel and you'll get these bonuses 😄 😁 😆 💥 🔥 ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin 💥 🔥
I hv bizhub c280 while printing or copying vertical color like black and magenta strips are on page i chnged the transfee belt unit wd roller but now paper has black shadow type printing not 100 percent ohk help me plz
If the scans are dirty when using the ADF, the solution is simple - you have a dirty little glass on the left side of the main window. You have a dot on the marker or the corridor. Clear it. But if Skney is dirty when you copy from the glass, but you have dirty mirrors under the glass, or you have used DRUM UNIT but I do not know which color. There is one more solution - you can have dirty LASER fast - clean them using the cleaner you have on the front flap. GIVE ME KNOW AND HELP
Hi, I have a Konica Minolta 350 Bizhub and I want to connect it with a Windows 10 computer and I do not know how you should be helped as soon as possible. Thank you.
I have a bad printout, what are those area to be clean to be able to print clear and no lines, by the way i replace new drum and cleaning blade, bizhub 162
A. Removal Procedure 1. Open the Front Door and turn OFF the Main Power Switch. 2. Open the Right Door. 3. Unlock the Lock levers [1] (at two places). 4. Holding onto the Lock levers [1] (at two places), remove the 2nd Image Transfer Roller Unit [2]. B. Reinstallation Procedure 1. Holding onto the Lock levers [1] (at two places), mount the 2nd Image Transfer Roller Unit [2]. 2. Lock the Lock levers [1](at two places). 3. Close the Right Door. NOTE • Make sure that the door is locked in position both at front and rear. 4. Turn ON the Main Power Switch. 5. Close the Front Door. NOTE • The 2nd Image Transfer Roller Unit is supplied with the Transfer Belt Unit. Replace it when replacing
1 Check the connector between M1-PRCB CN31 for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 Check the connector between PS26-relay CN19- PRCB CN27 for proper connection and correct as necessary. 4 Check the connector between SD1-relay CN21-relay CN19-PRCB CN27 for proper connection and correct as necessary. 5 PS26 I/O check, sensor check PRCB CN27-13 (ON) 4-C. 6 SD1 operation check PRCB CN27-10 (ON) 4-C 7. M1 operation check PRCB CN31-2 (REM) PRCB CN31-5 (LOCK). 8 Replace M1. 9 PRCB ICP5 conduction check. 10 Replace PRCB. Description Manual feed up/down abnormality • Paper does not unblock the bypass lift-up position sensor (PS26) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The bypass lift-up position sensor (PS26) is not blocked even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/
Sir . I got bizhub c35p and i have a problem with printing after refilling toner . The printout color especially cyan and magentic have spots and color disforming . How can i solve this . Thanks alot
Install original toner. Why did you regenerate? Originals are cheap.
Minolta 165 e. From some days irritating squeaking sound from running copier. Is transfer roller touching the drum? Or from dp or toner unit gears problem? 😢😢
Unfortunately, you'll have to find it yourself. Not one solution.
Encorajo os espectadores a apoiar meu canal: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin
Vídeos apenas para apoiadores: ruclips.net/p/UUMOOHtXTtGHj33pUm8Gf2FH3A
I have a C224 and every copy had a black streak across the paper. Will cleaning or replacing the Transfer Roller fix it?
It seems to me that you should take care of cleaning the black laser, then check the black Drum Unit and in particular the Charging Unit.
thanks. After calibration, the transfer roller is dirty again. Transfer belt is new. Roller > 100.000 prints on a magicolor 5570. What can be the reason? I have vertical grey smudges both front and back of paper. Many thanks.
The Transfer Belt Unit may be used up. You have to replace ITB Image Transfer Belt
sir, did we must use isopropyl alcohol or just only wet the fabric with water ? - from Malaysia
just only wet the fabric with water
I having problem which is that papers are constantly getting jammed in the side compartment can this be fixed my printer is a konica minolta bizhub c200
Any response is appreciated
First, replace with new ones or wash the paper pick rollers in the paper cassette. If the rollers are worn out, the paper arrives late at the sensor on the side of the copier, causing a paper jam.
Thank you and I invite you to watch other videos about repairing copiers and printers.
@@MrRicoh thank you very much I figured it out
@GamerWeeb 9000 I am very happy. Best regards.
Oôôoôôoôloooo
@@MrRicoh oôoôôoôoôôôôôôoôoôoôôôôôôôôooôôooooôooôô
What product do you use do clean it ?
novogum extra
ANYTHING ELSE THAT WE CAN USE FOR CLEANING????
BASIC ALCOHOL FROM ANY DOLLAR STORE.
Sir good information sir we have konica minolta c224e model when I print 12x18 sheet in the background magenta color very light also printimg and 4 inch in the middle aria color discolour printing what is the solution sir/ please reply sir
Creo que necesita regenerar el tambor, es decir, reemplazar el tambor, la barra del rodillo de carga.
i have a konica c360 and it works fine for a day, then next day colors are wrong sometimes there is too much cyan other times too much magenta, and then after a day it works again just fine, its been more than a week since its been alternating between working just fine and getting colors wrong. any idea what could cause this ???
Hi. Check how many copies the developers made. They are probably already worn out and need to be replaced. Check the developer counter.
@@MrRicoh thank you are right, must be the developers, i'll be replacing them soon. also it gets some fading vertical straight lines on the first two to four pages whenever i start copying or printing. do you think its because of the transfer belt cleaning blade or something else ?? also seems like the transfer roller gets dirty a lot.
@@MrRicoh here some feedback, i did replace the transfer belt cleaning blade and everything got better, now the copies are all clear and all the color problems are resolved. i don't think i will be replacing the developing unit anytime soon.
@@maktabaalmanfalouti9421 How much transfer belt cost ?
hello sir please tel me in english what is the tomasz
My C250 is leaving a light grey everywhere that should just be white areas. Do you know what this might be?
You probably have your developers worn out so you need to replace them. Fortunately, there are plenty of replacements out there, so repairing shouldn't be expensive.
😄 😁 😆 Start supporting this channel and you'll get these bonuses 😄 😁 😆
💥 🔥 ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin 💥 🔥
I am getting error code p21. What does it mean ?
You haven't written what your Minolta copier model is, but P21 generally means the Transfer Belt Unit is damaged.
I hv bizhub c280 while printing or copying vertical color like black and magenta strips are on page i chnged the transfee belt unit wd roller but now paper has black shadow type printing not 100 percent ohk help me plz
Replace OPC drums and developers, remember about their performance:
Developer Black: 570,000 Pages
Developer Color: 115,000 Pages
Drum Black: 100,000 Pages
Drum Color: 75,000 Pages
Hi my printer c220 is printing blanck I suspect is a problem with dust please advise me on how to resolve the problem
Please clean the copier first. In particular, clean the scanner section and Charge Unit
What do you use in cleaning the roller
Novogum Extra
Can I use water for cleaning this?
Yes
9y600
Thanks . I have a problem in printing papers. It leaves some lines scanned, knowing that Toner is there and I do not know how I can fix it.
If the scans are dirty
when using the ADF, the solution is simple - you have a dirty little
glass on the left side of the main window. You have a dot on the marker or the corridor. Clear it. But
if Skney is dirty when you copy from the glass, but you have dirty
mirrors under the glass, or you have used DRUM UNIT but I do not know
which color. There is one more solution - you can have dirty LASER fast - clean them using the cleaner you have on the front flap. GIVE ME KNOW AND HELP
Hi, I have a Konica Minolta 350 Bizhub and I want to connect it with a Windows 10 computer and I do not know how you should be helped as soon as possible. Thank you.
unfortunately I do not know how to do it, I know mechanics
ey bro I know. I can help you.! :-)
I have a bad printout, what are those area to be clean to be able to print clear and no lines, by the way i replace new drum and cleaning blade, bizhub 162
first, clean the mirrors in the scanner, then clear CHARGE UNIT wire and grid, after that laser glass
What to use cleaning of those parts like charge unit and laser glass?
I already know how to clean glass and mirror thanks for the reply
Btw do you sell parts and consumables of bizhub like pcu, fuser unit, power supply unit and other parts
my bizhub c252 is not printing, infact it hasn't been used for 2 years and cartridges seem to be finished
Can not see the picture? Does it not work with the computer?
how to change the roller
A. Removal Procedure
1. Open the Front Door and turn OFF
the Main Power Switch.
2. Open the Right Door.
3. Unlock the Lock levers [1] (at two
places).
4. Holding onto the Lock levers [1] (at
two places), remove the 2nd Image
Transfer Roller Unit [2].
B. Reinstallation Procedure
1. Holding onto the Lock levers [1] (at
two places), mount the 2nd Image
Transfer Roller Unit [2].
2. Lock the Lock levers [1](at two
places).
3. Close the Right Door.
NOTE
• Make sure that the door is locked in
position both at front and rear.
4. Turn ON the Main Power Switch.
5. Close the Front Door.
NOTE
• The 2nd Image Transfer Roller Unit
is supplied with the Transfer Belt
Unit.
Replace it when replacing
very easy to change
my transfer papers not printing properly images comes out messed up
There are many options. I'm not at your machine so I won't help.
@@MrRicoh was expecting a better reply even some suggestions I using c454e series
Anyway thanks for replying is there a video showing how to service my machine for better quality printing
error code c0211 on bizhub c224 by tray not working please help
1 Check the connector between M1-PRCB CN31 for proper connection and correct as necessary.
2 Check the connector of M1 for proper drive coupling and correct as necessary.
3 Check the connector between PS26-relay CN19- PRCB CN27 for proper connection and correct as necessary.
4 Check the connector between SD1-relay CN21-relay CN19-PRCB CN27 for proper connection and correct as necessary.
5 PS26 I/O check, sensor check PRCB CN27-13 (ON) 4-C.
6 SD1 operation check PRCB CN27-10 (ON) 4-C 7. M1 operation check PRCB CN31-2 (REM) PRCB CN31-5 (LOCK).
8 Replace M1. 9 PRCB ICP5 conduction check. 10 Replace PRCB.
Description
Manual feed up/down abnormality
• Paper does not unblock the bypass lift-up position sensor (PS26) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
• The bypass lift-up position sensor (PS26) is not blocked even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
Części do kopiarek www.copy-expert.pl/
Facebook: facebook.com/Copy-Expert-113431678801597/
Części używane www.copy-expert.com/
To się wymienia a nie czyści.
To prawda, ale w czasie oczekiwania na nowy wałek trzeba się ratować.