This is the second subwoofer featured in this channel with the same issue, the rattling is just absurd. You invest so many time and resources doing this, but you don't give the extra care needed to make an outstanding final result, and yes your job is amazing and your electronic skills as well, but for me is just unbelievable to think that after all this effort you cut on making an acoustic reasonable box
What's wrong with you guys? It's OBVIOUSLY his tin roof rattling. That's very common in his area of the world. I swear, it would probably kill you to just say "Hey man, good job." I would bet $1,000 that neither of you have HALF the skills of this guy. Unbelievable.
@@robertjefferson8275 💯 agree with you. That's definitely not the box or the sub. I'm certain it's the roof or other metal things rattling. It reminds me of exactly how my license plate sounded back when I had a system in my car.
nice work on that amplifier, to wire that is admirable! small tip, patience is the difference between a completely smooth surface where to wood meets and not.
ну ты ничего не понимаешь, они лучше инженеров kef знают какой объем короба и толщина нужны, так же они прекрасно выставили на глаз фазоинверторы! Но по факту этим рестораторам бы руки переломать, восстановители хреновы.
Can you post the name of the stuff you're using for your restoration, like this chemical that removes adhesive and the glue for the cones? And where you get the perfect replacement parts when needed? Thanks!
Do u guys do repairs for ppl outta state if so I'd like to send an Amp to you that needs repairs done to work again please let me kno thanks I like the work u do I follow u as well
If you're going to go to all the trouble of fixing it, why didn't you re-paint the speaker base and make it look half decent. Just seems like a lazy restoration to me.
Is it worth it?! Sourcing the right components, etc. If you had a workshop, and equipment, then yes ! These people do it as semi-professionals. You have to have the right contacts, and materials to cannibalize. Ne vale la pena?! Reperire i componenti giusti ecc. Se avessi un laboratorio, e attrezzature, allora si ! Queste persone lo fanno come semi professionisti. Devi avere i contatti giusti, e e materiali da cannibalizare.
Единственное что нужно было сделать переклеить подвес и все,ну и продуть дин от пыли,а автор развез это на сутки🤣🤣🤣да и катуха уже была ремонтная судя по надписям изнутри,с завода никаких надписей нет
Фазоинверторы 50мм ? Один свист трубы будет. Нужно 110мм минимум при таком подвесе. Ну а в конце при прослушке вообще не понятно что у вас дребезжит помещение или сабвуфер разваливается уже . 2300вт если только pmpo В коментариях одни глупые и восторженные комментарии. Все плохо сделано . Видно что человек вообще далек от этого.
Сборка ужасная. Не проклеил стенки короба. Не проклеил посадочное место под динамик и под плату. Гермитизации никакой. Шумовиброизоляции никакой. А потом хотите хороший звук?
Я того мир ебал. Нужно то было катушку заменить с подвесом, а короб хотя бы в JBL рассчитать. Параметры тс стопудово никто не снимал. Они наверное и не знают что это такое. Насчёт пайки я вообще в ахуе - кондёры первыми паять, это же пиздец. Сначала впаивают самые низкие детали, а потом по возрастающей. Про паяльник я вообще молчу, хорошо хоть топор на костре не нагревали чтобы платы сваять. Да-а-а а-а-а-а-а 😖
2300w through wire of less than 0.5mm. yea right. 0.51 wire at 4 ohms would be around 50m of wire and could carry about 0.577A . 2000w/0.577 A = 3.466 Kv HaHaHa I recon 400w rms max
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
21:00 garage shacking :D love it GJ
Лучший, спасибо за потраченное время!!! Здоровья тебе и твоей семье!!!
Muy buen trabajo 👍👍👍
Congratulations, it was very good.
Very very good and fantastic ok 👍 👍 😊
you are the master of electronic stuff
AMAZING....SHOW
This is the second subwoofer featured in this channel with the same issue, the rattling is just absurd. You invest so many time and resources doing this, but you don't give the extra care needed to make an outstanding final result, and yes your job is amazing and your electronic skills as well, but for me is just unbelievable to think that after all this effort you cut on making an acoustic reasonable box
the sound oozes from under the speaker and from other crevices, the bass reflex ports are very small and not tuned
What's wrong with you guys? It's OBVIOUSLY his tin roof rattling. That's very common in his area of the world.
I swear, it would probably kill you to just say "Hey man, good job." I would bet $1,000 that neither of you have HALF the skills of this guy. Unbelievable.
@@robertjefferson8275 💯 agree with you. That's definitely not the box or the sub. I'm certain it's the roof or other metal things rattling. It reminds me of exactly how my license plate sounded back when I had a system in my car.
Great Work 👍👏
Great video!
nice work on that amplifier, to wire that is admirable! small tip, patience is the difference between a completely smooth surface where to wood meets and not.
First,,,,very informative video...thank you for sharing
Hey brother...great job. Turned out great...and you did it all with your own two hands. Will be watching more of your videos. ❤
Definitely a flea market woofer
pretty much, they were always sold online in places like ebay under the pyle, auna, in-phase brads and were really cheap. I think around £35.
@@axeami1354 looks like some of the eclipse subs to me
Um ótimo trabalho PARABÉNS👏👏👏👏👏
Um ótimo traballho PARABÉNS 👏👏👏👏👏
🎉BOA noite ótimo essa caixa de som show de bola😊
ok quá đẹp 10/10
Nice it looks good.
Really great work
hello from moldova👌👌👍👍
U best !!!u r big fan from Russia!!!
The speaker is unique.
Good sir 👍
5:29 danger... scorpion in the table (or lagart)
Какие 2300 ватт...вы фантазёр.....а так работа хорошая...
Мой пердёж похож на звук этого сабвуфера
ну ты ничего не понимаешь, они лучше инженеров kef знают какой объем короба и толщина нужны, так же они прекрасно выставили на глаз фазоинверторы! Но по факту этим рестораторам бы руки переломать, восстановители хреновы.
@@MadMaxTMgames_channel Если такой саб поставить дома, соседи будут в восторге
@@МистерТрололо-ж9й сам в первую очередь встанешь что бы выкинуть это произведение рукожопого мастера. Звук блевотный получили на выходе
@@Woon_Shen_Hang Именно, но он делает деньги на просмотрах
Ну фазик там значительно нужен большего объема и тогда звук будет мощьный
What product do you use to take the adhesive off to take it apart????
ацетон же
@@evilenin9712 а растворитель пойдёт?
@@ДимаМалый_777 для резины точно
👌
That speaker aint 2300 watts
That's probably like 10k+ PMPO of course, probably like 500+ watts RMS or something
Has 2 coils so if each of is 500w rms then its a 1000w rms subwoofer
Good job 👍🏽👍🏽
Yip no way it's 2300 watts.
@@markgraves2209он неимеет 2300 ват
Completo,show!!!!!!!!!!
Restoration ✅
Destroying location near subwoofer ✅
What are you spraying to get the glue off and to remove the woofer? What is that in that little bottle?
Acétone - très dangereux
Restaurado alto falante 2300 watts 😉
👏
What's rattling there so much during the sound test?
Sein schlechtes Gehäuse.
his workshops roof ... lmao
It sounds like a piece of tin, rattling somewhere
They could be the windows
Fakeness, always the same song and same rattle.
Can you post the name of the stuff you're using for your restoration, like this chemical that removes adhesive and the glue for the cones? And where you get the perfect replacement parts when needed? Thanks!
Acétone
this is a cool looking sub!
And putting the amp together by yourself was for sure hard work!
btw can anyone tell me what sub this is pls?
Hi, what did you use to remove the glue? I'm talking about the chemical in the little white bottle. thanks
Acétone
Acetone would dissolve the paint on the speakers parts. This is something else.
Sounds like I’m taking a shit after Taco Bell.
wow
😮😯🙉 Is this wood or plywood?
Whats the solution used for removing the rubber?
what's that liquid used to remove the glue..??
where do you get the speakers from?
Aste uno de como arregar un woffer sony de 8 pulgadas🙏🙏
What name or type of this glue?
...cosa c'è nella bottiglia?....con cosa scolli le sospensioni dell altoparlante?
Acétone
Pasos a seguir para restaurar un subwoofer: 1.- Tener una carpintería
What liquid chemical is used to remove the old surround and spider?
Acétone - très dangereux
Do u guys do repairs for ppl outta state if so I'd like to send an Amp to you that needs repairs done to work again please let me kno thanks I like the work u do I follow u as well
What brand is that sub
Is that 4 ohm or 8
1024 ohm
Excellent
What is the name of the liquid to remove the glue?
Acétone - très dangereux
May I help me my威力登ultra 十吋 the speaker not work
What is the name of this loud speaker? 🤔🙂
Maaf, toLong kasih tahu cairan apa yang di gunakan membuka membran tersebut?? terima kasih ❤
05:20 what is that ??? a lissard ? on the right corner of the wood :D
All bro needed to do was recone it and clean it up a bit and fix the connections and it would of been perfect
Kitna price aaya
Who knows you're building enclosure and diy amplifier at the same video... I thought it's speaker restoration only 🗿? ....
Bro builds a whole system for the subwoofer
Who heard the door shake
👇🏼
It has only 1000 watt not 2300w bro
Там точно 2300? Может 300?
У меня в 8 дюймовом самсунге 100 ватном, катушка чуть больше была.
Iba todo ok hasta que llego la hora de la pintura...!
Your supposed to either fiber glass the box or carpet it
I much prefer polyester fibre in a ported box since its more easier to handle and it is safe in an enclosed environment.
WOULDNT IT, BE BETTER, TO APPLY THE GLUE, WITH A SYRINGE ? ALOT MORE, PROFESSIONAL, TOO **
If you're going to go to all the trouble of fixing it, why didn't you re-paint the speaker base and make it look half decent.
Just seems like a lazy restoration to me.
Is it worth it?! Sourcing the right components, etc. If you had a workshop, and equipment, then yes !
These people do it as semi-professionals. You have to have the right contacts, and materials to cannibalize.
Ne vale la pena?! Reperire i componenti giusti ecc. Se avessi un laboratorio, e attrezzature, allora si !
Queste persone lo fanno come semi professionisti. Devi avere i contatti giusti, e e materiali da cannibalizare.
Единственное что нужно было сделать переклеить подвес и все,ну и продуть дин от пыли,а автор развез это на сутки🤣🤣🤣да и катуха уже была ремонтная судя по надписям изнутри,с завода никаких надписей нет
Зачем портить каркас ? Можно перемотать катушку не отрывая каркас
Короб не под этот саб. Слышно по звуку что не хватает объёма
Фазоинверторы 50мм ? Один свист трубы будет. Нужно 110мм минимум при таком подвесе.
Ну а в
конце при прослушке вообще не понятно что у вас дребезжит помещение или сабвуфер разваливается уже . 2300вт если только pmpo
В коментариях одни глупые и восторженные комментарии.
Все плохо сделано . Видно что человек вообще далек от этого.
bro that amplifier can barely output 800 watts so the subwoofer max power is 800-1000 watts
That transformer looks like 250 Watts, so RMS will be below that anyway.😂
Sounds terrible; can’t tell if it’s rattling something in the background or if it’s the sub.
That's the garage rattling
Какие 2300w????? Откуда им там взяться????🤦♂️🤦♂️🤦♂️🤦♂️
Alot of work for a poorly assembled unbalanced result. Now throw it in the garbage.
I have reconed a few speakers, over the years, and have never the term "balanced" in reference to loud speakers.Could you share what that is with us?
Смартфон Vivo
Looks like about 16mm xmax. Nope.
Que animal ni un cajón saben aserr😢 que pena por el parlante
It's nowhere near 2300 watts.
Усилитель слабоват😢
Сборка ужасная. Не проклеил стенки короба. Не проклеил посадочное место под динамик и под плату. Гермитизации никакой. Шумовиброизоляции никакой. А потом хотите хороший звук?
WHAT IS THAT ? A BASS DISC ? IT SURE AINT GOT ANY SUBSTANCE, NO LONG THROW ?
what is voice😂
Sounds like tin can
That shit isnt anywhere NEAR 2300watts.
Я того мир ебал. Нужно то было катушку заменить с подвесом, а короб хотя бы в JBL рассчитать. Параметры тс стопудово никто не снимал. Они наверное и не знают что это такое. Насчёт пайки я вообще в ахуе - кондёры первыми паять, это же пиздец. Сначала впаивают самые низкие детали, а потом по возрастающей. Про паяльник я вообще молчу, хорошо хоть топор на костре не нагревали чтобы платы сваять. Да-а-а а-а-а-а-а 😖
2300w through wire of less than 0.5mm. yea right. 0.51 wire at 4 ohms would be around 50m of wire and could carry about 0.577A . 2000w/0.577 A = 3.466 Kv HaHaHa I recon 400w rms max
Sounds like sh... as expected
Another fake restoration 😂😂