Kia Sorento 2018, brake light/tail light bulb replacement
HTML-код
- Опубликовано: 8 сен 2024
- This is to show you how to replace a busted brake light bulb. It's shows in the beginning that I used a 11mm socket but it's better to use a 10mm but either way it will work. Thank you for dropping by and please like and subscribe. Have a good day!
P.S.
They said that never touch the bulb with your fingers because the salts and oils from your skin will damage the bulb and cause the heat to concentrate. This can significantly reduce the life of the bulb or even worse cause it to shatter. But so far I've been using it for 2 months and all is fine. You can use rubber gloves or anything that won't transfer the oil or salt to the bulb. 
Авто/Мото
I had to use a 10mm to get them off but thank you I had no idea how to change it!
I'm glad that I helped you changed it. Thank you for dropping by. Have a great day!
Great detailed video. Helped me tons. Thank you!
Glad it helped!
slow paced and easy to follow, thanks!!!!!!!!!!!!!!!!!!!!
Great to hear! Thank you for dropping by!
Great, easy to follow video. Thanks.
Glad it was helpful!
Very detailed video. Easy to follow. Thank you!
Glad I helped. Thank you for dropping by.
Thank you 🙏🏽 your video helped out a lot.
Thank you for the video. It was very helpful.
You are very welcome! If you have any request. Let me know and I hope I can do it for you. Only the lighter problems as I don't have a heavy equipment tools with me. Again, thank you for dropping by. Have a great day ahead!
Thank you! Easy to follow directions. Proud that I changed it myself😊
Thank you for dropping by. Good job! I'm glad that I helped. Have a great day ahead!
Great video. Exactly what I needed.
Great video, my 2018 (I think) had 10mm nuts instead of 11mm.
If light bulb is not coming out. It’s because you have to push in and turn to the left. Counter clockwise.
Great video
Great video but the bulb is a 2057, although a 2357 will work.
Thank you for clarifying. Have a great day!
@@lifebeenanything Youre welcome! $8.99 at autozone. Your tutorial really helped so I appreciate it.
Thank you !
You're welcome!
Hi thanks for your informative video, do you know which fuse for the rear turn and tail light
Hi! You're welcome and I'm glad I helped you in a way through this video. Sorry for the delayed reply as I got a little busy these Pass few days. As for your questions about where to look for the fuse on your rear turn and tail light. I will make a video to see where are they located. As of the moment I don't know yet but I will try to locate it for you. I will post the link in here once I found out . Thank you for dropping by and have a great day ahead.
Hi! This is the link for your requested fuse for tail light and return signal fuse. I hope it could help you.
ruclips.net/video/7cewzrtZ8C0/видео.htmlsi=_4ywQAJEqGwKWiGG
So my sockets is most likely have water damage. Is there a way to simply order a replacement socket for only the break light bulb or should i order all three at once ?
Hi! Thank you for dropping by. Yeah you can just order the sockets only. Here's the link.
www.kiapartsnow.com/genuine/kia-holder-wiring~92480c6000.html. I hope I answered your question. Have a great day!
How do you replace the pins or bolts
Hi! Thank you for dropping by. I will make one for you. I hope you could wait as I'm at work right now I will send you a link on your thread here once I'm done with it. Is it the bolt you're talking about is the screw in the compartment to lock the brake light? I hope I'm correct on what you mean. Thank you and have a great day a head.
ruclips.net/video/4aNUU_fIs-U/видео.html Here's the link for the video. I hope it helps. Unfortunately you can't replace the screw itself because it's attached to the plastic part. You can watch it to see on how to remove it.
Thank you!