Relay dimodulnya itu cuma 10A Om, bisa dimodif diganti dengan ampere yang lebih gede atau pakai relay external. Atau Om pastikan/cek dulu arus saat charging berapa Ampere.
@@JanSKD selain relay ... volt kapsitor perlu dimodif juga? Jadi amper maksimum perlu diketahui datanya sebelum pakai ini ya ... kalo yg diatas relay komponen apa itu kotak biru gede ... terima kasih replynya mas
@@delbandung4801 elco tidak perlu diganti Om, krn voltase yg masuk dr AC trus jadi DC bukan dr V in DC (hijau). Yang kotak itu trafo stepdown AC, kemudian jadi DC untuk menghidupkan module
Pak,saya menggunakan HCW-M633 utk mencas batrai vrla 12v190ah yg saya rangkai seri menjd 48V. Saya cut off batas bawahnya di 49V. Indikator lampu charging nya menyala tp kok tdk bisa melakukan charging. Sampai saya tunggu 3jam tetap 49V tdk naik2. Itu kendalanya apa ya pak?
@@thuydung3519 HCW-M633 và XH-M602 có tính năng giống nhau, đó là ngắt dòng điện (AC) với cài đặt giới hạn / điện áp (DC) khỏi pin. Mục tiêu là pin không sạc quá mức hoặc xả quá mức. Nhưng tôi sử dụng mô-đun này để cắt dòng AC trong hệ thống năng lượng mặt trời của tôi. kiểm tra tại đây: ruclips.net/video/gQopZnKGtaQ/видео.html
Hello! My task: When electricity appears on the network, my automation includes a power outlet in which a charger is inserted, the output of which is constantly connected to the battery terminals, and the battery is charged. When the voltage in the network disappears, my automation includes an inverter, the input of which is also constantly connected to the battery terminals, and the output to the consumers in the apartment. Now what I want to do. Since the power supply interval on the network is longer than the required battery charge time (up to 14.4V), I need XH-M602 without my participation (!!! This is a key requirement !!!) turned on the charge when electricity appeared on the network, and turned off the charger when the voltage at the terminals reached maximum. Question: if the limit 10.5 - 14.4 c is set for me in advance on XH-M602, and my automation, when the voltage appears on the network, supplied 220v for power to XH-M602, which includes a charger, and on the terminals of my battery will be, for example 13.2v (t.e. it will be the middle of the set interval !!!), then XH-M602 will turn on the charger?
10.5v : start voltage and 14.4v : stop voltage. 1. start and stop can set once the electricity is connected to module 2. in first time battery (13.2v) connect to module, the charger will be charging until the voltage greater than 14.4v (full and then charger off) 3. in discharging position (14.4v - 13.2v - 10.5v), when battery voltage 13.2v the electricity disappears on the network and then appears again. ---> The charger will remain off. 4. in charging position (10.5v - 13.2v - 14.4v). the charger will be on if voltage under 10.5v, when the battery voltage 13.2v and the electricity disappears, the charger will be off. if electricity appears, the charger will be on until the voltage greater than 14.4v -CMIIW
bang kalo bedanya xh-m603 dengan xh-m604 apa bang ? lebih rekomen mana buat charger aki bang atau baterai dengan input minimum 12v.
@@aldybachtiar7449 range voltase lebih lebar m604 dan relaynya lebih besar m604, kalau menurut saya lebih memilih xh-m604
@JanSKD oke terima kasih jawabannya banh 🙏
Xh-604 apa bisa buat ngecas aki 72volt mas? Rencana mau bikin cas aki 84volt 10a
@@tofiqprasojo7017 spek hanya 6-60V Om
Sya cari yg bisa cut off over voltase AC . Untuk genset bang
Gensetnya pakai stabilizer yg ada batas bawah dan batas atasnya Om
Atau pakai alat seperti ini, yg bisa diseting under voltage dan over voltage
tokopedia.link/dnuDEAI8wBb
Xh m602 bisa dipakai untuk psu 84v 32A mas ... kalo bisa mau saya pakai buat charger baterai
Relay dimodulnya itu cuma 10A Om, bisa dimodif diganti dengan ampere yang lebih gede atau pakai relay external. Atau Om pastikan/cek dulu arus saat charging berapa Ampere.
@@JanSKD selain relay ... volt kapsitor perlu dimodif juga? Jadi amper maksimum perlu diketahui datanya sebelum pakai ini ya ... kalo yg diatas relay komponen apa itu kotak biru gede ... terima kasih replynya mas
@@delbandung4801 elco tidak perlu diganti Om, krn voltase yg masuk dr AC trus jadi DC bukan dr V in DC (hijau). Yang kotak itu trafo stepdown AC, kemudian jadi DC untuk menghidupkan module
@@JanSKD erimakasih info ... sukses channelnya
@@delbandung4801 sama-sama Om, Amiinn...
ass, itu 22 nya bisa ngecas ke 3 vol batrai ga kang 🙏
Bersadar speknya tidak cocok untuk baterai 3 volt Om
XH M602 : 3.7v - 120v
XHM604 : 6v - 60v
@@JanSKD XH M602 harus batrai paling rendah 3.7v baru bisa ya sampai batas 120v begitu kah
@@bismilahhirohmanirohim1247 betul, spesifikasinya demikian Om
@@JanSKD terimakasih ya sangat membantu
@@bismilahhirohmanirohim1247 sama-sama
Pak,saya menggunakan HCW-M633 utk mencas batrai vrla 12v190ah yg saya rangkai seri menjd 48V. Saya cut off batas bawahnya di 49V. Indikator lampu charging nya menyala tp kok tdk bisa melakukan charging. Sampai saya tunggu 3jam tetap 49V tdk naik2. Itu kendalanya apa ya pak?
Coba cek output chargernya Om sebelum konek ke baterai
@@JanSKD output voltase nya ya pak?
@@user-A.Dspt5ou6df1i iya Om, apakah ada dan berapa output volatase dr charger
@@JanSKD siap pak...
Link pembelian hcw dmn ya ? Ada linknya
Itu dulu saya belinya di link produk XH-M602 om, ternyata dikirim HCW-M633 🤣
Cr di Toko ijo coba om
Banyakan sekarang yang mh m602 😔
Boleh minta linknya ditoko ijo waktu belinya
Nama tokonya "Bezze Part" Om
Nanti coba chat dulu ke selernya yg ready varian apa (XH-M602 atau HCW-M633)
Cho tôi hỏi tại sao khi mới cắm điện ac vào mà relay đã đóng rồi vậy?
nếu DC chưa được kết nối và chưa được đặt ở giới hạn dưới và trên, rơle của bạn có thể bị đoản mạch (bị hỏng).
Cảm ơn bạn đã phản hồi ạ!. Vậy mạch này có ưu điểm gì hơn so với mạch XH-M602 ạ?
@@thuydung3519 HCW-M633 và XH-M602 có tính năng giống nhau, đó là ngắt dòng điện (AC) với cài đặt giới hạn / điện áp (DC) khỏi pin. Mục tiêu là pin không sạc quá mức hoặc xả quá mức.
Nhưng tôi sử dụng mô-đun này để cắt dòng AC trong hệ thống năng lượng mặt trời của tôi.
kiểm tra tại đây: ruclips.net/video/gQopZnKGtaQ/видео.html
Hello!
My task: When electricity appears on the network, my automation includes a power outlet in which a charger is inserted, the output of which is constantly connected to the battery terminals, and the battery is charged. When the voltage in the network disappears, my automation includes an inverter, the input of which is also constantly connected to the battery terminals, and the output to the consumers in the apartment. Now what I want to do. Since the power supply interval on the network is longer than the required battery charge time (up to 14.4V), I need XH-M602 without my participation (!!! This is a key requirement !!!) turned on the charge when electricity appeared on the network, and turned off the charger when the voltage at the terminals reached maximum.
Question: if the limit 10.5 - 14.4 c is set for me in advance on XH-M602, and my automation, when the voltage appears on the network, supplied 220v for power to XH-M602, which includes a charger, and on the terminals of my battery will be, for example 13.2v (t.e. it will be the middle of the set interval !!!), then XH-M602 will turn on the charger?
10.5v : start voltage and 14.4v : stop voltage.
1. start and stop can set once the electricity is connected to module
2. in first time battery (13.2v) connect to module, the charger will be charging until the voltage greater than 14.4v (full and then charger off)
3. in discharging position (14.4v - 13.2v - 10.5v), when battery voltage 13.2v the electricity disappears on the network and then appears again. ---> The charger will remain off.
4. in charging position (10.5v - 13.2v - 14.4v). the charger will be on if voltage under 10.5v, when the battery voltage 13.2v and the electricity disappears, the charger will be off. if electricity appears, the charger will be on until the voltage greater than 14.4v
-CMIIW
@@JanSKD , Thanks so much for the answer!!!
@@ВикторЛановой-и5ц You're welcome