Vinyl Wrap A Front Bumper With Inlays | Subaru STI
HTML-код
- Опубликовано: 12 май 2018
- Check out the products here on Amazon:
bit.ly/VViViDGlossNardoGrey
bit.ly/VViViDTechArtBlackCarbon
bit.ly/VViViDLightSmokeTint
A lot of work went into wrapping this front bumoer, and this Subaru STI front bumper isn't even the hard one to wrap.
www.ckwraps.com/
Get Certified Visit www.vvividhq.com/get-certified
Instagram @ckwraps @newconceptautosalon 
Авто/Мото
Amazing job CK! Not going to judge you on being tired and it just shows that you are human, working hard, yet still getting the job done! Thanks for the great videos and being there to show us how it's done. Not a lot of wrappers talk through it the way you do, its things like that where I feel like I'm actually learning something.
Your videos are a godsend. I recently decided to try my hand at wrapping and I've been using your videos to learn and they've helped tremendously.
“As you get close to the end I recommend doing what I just did there” *no explanation* LOL I’m sorry you’re so tired, you did excellent work on the subie and I’m loving going through these videos. Keep them coming!
Very nice job dude. Attention to detail the entire time.
Bad MrFrosty that’s the kind of work actually expected anytime but for sure not for a cheap wrap ahHahaha, great damn job man, teach me ! Haha in the IE: where ya at ?
Amazing job ck I'm wrapping my legacy and you make it look easier then it is. Thanks for the time to show us.
You're a sorcerer with this stuff, nice work!
you definitely sound burnt! thanks for this. I am planning of wrapping my STI bumper and was not sure where I should do inlays. Thanks again buddy.
Would you make a video showing how you layout a directional wrap on a car, that's something I haven't seen before on RUclips. Doing a great job even with being tired.
You know when CK is exhausted when he doesn't fold the vinyl backing 😁
Great job as always
Thank you for these! Much appreciated...
He’s a professional. Great job
Pheonominal work Christian ... Lord bless you brother ... Peace
thx for taking the time to teach us this man 🤝
Watching you do this front bumper helped me appreciate why I will pay someone to do this job for me! Vinyl Artist.
You created so much more work with that first step of taking the backing off and stretching it the way you did. You don’t need to heat for the first step if you lay it from the center, out. But heating first to then stretch to glass over, stretch’s it too much. You can cold lay it first and THEN heat to glass it out. Way less material stretching.
Lookin sweet AF!!!
amazing work :o
Nice job
Nardo grey by vivid is super hard compared to other wraps good job bro super frustrating but your a champ
Fantastic artist you are great 👍
damn looks nice!
Nice job. I'm wrapping a nissan Juke front and rear bumper. What's your advice for wrapping circle head lights?
Looks great ! Just curious…. Sometimes bumper removal is preferred or preference ? Ur thoughts ?
Would it have been easier to remove the tow hook wrap the bumper then install the tow hook?
I love how this guy sounds like Tom Brady.
CK do you think I would need to do the same inlays on a 13 civic si next to the headlights?
WOW THANKS
curious how you would do this same job now, i feel like this is a lot of heat and stretching compared to what you do now. would you still come at this bumper the same way?
it is not could be easier to remove the whole grill out of the way? I would like try to wrapping my subaru too that's why I am asking! bw your videos helping me a lot to understand to working with the vinyl! thank you!
Are you running on fumes because there is more time consuming work than expected? I have been doing LED installs for friends and trying to keep good quality just takes way longer than the time and money I quote them.
Why not take that worst ringtone in the world to the camera if it's going out of charge 😉😂😂 but again, it's a wonderful job you did. 👍👍👍👍👍 Can't even wait for the delivery of my "Avery Dennison Satin Urban Jungle" to start wrapping my own car 😋😋😂😂
You are cool man
Man I can’t stop looking at that tow hook hole, driving me crazy
hahahahaa. i definitely understand the feeling. all the hardest and best part to wrap. then theres the JD part.
at what point is it considered overstretching? in this, the spoiler and the boot/trunk video you seem to stretch the film quite a bit.
do you ever use 2 layers on front bumpers or hoods to help mask rock chips? ive done a few in vvivid matte and it seems to chip easilly and they stick out like a sore thumb.
What does adding the inlay do?
Hey CK you have been inspiring me to give this a go on my 2009 WRX. How do I work how much vinyl I need to order for the whole car?
David Wright Length of car x3, add an extra 5-15’ for bumpers, and round up to closest film size!
Hey, Bro! Can you tell me about the inlines, i have problems with the edge. I'm always short, and i see the car color. i think I'm cutting too much or the inlines are not long enough on the interior side. please let me know. Peace out!
Question. I want to wrap my sti. I have scratches dents and chips. I will get it paint corrected but the paint wont be perfect. Will the wrap look like shit because of rock chips and a few other imperfections?
Subaru , take notes, this is the shit we want
how do you stretch so much without stretch marks
Where can I get this wrap/color
i need a shot LOLLLLLL someone bring me one. fuck i died LOLLL
😍😍♥️♥️
Still on catch up with your videos. Great wrap again, but how glad are you that those annoying idiots in the back ground are gone. 💯💯💯
Why did you choose to NOT remove the bumper cover and wrap around the edges where it meets the fender?
have you tried wrapping a piece that is not attached to the car? it's HARD to wrap without having something holding the piece back while you pull on it... It is very awkward having to put on the film and then when you pull on it it just moves towards you. THat is why he leaves it on the car so that he can actually put it on... However he DID remove the lights and other pieces that go in the bumper to get better coverage.
@@GOLD_FEVER Yes, I have, a lot. That's why you loosen the bolts and hardware that connects it to the car. You then wrap as normal, then remove it and wrap around the edges! Not hard.
Looks great! Just wondering why you wouldn't pop off the front grille ...?
I did but put it back on after the carbon fiber was done. No need to have it out after that
Who the heck “unlikes” a video like this..? Lol haters
Really excellent but that compressor noise in the background has to go. Good job.
10 dislikes are from wraptors
Tell the owner you guys need some racks.
Always interesting to see how stress effects ppl. You're attitude is night and day difference compared to most of your other videos. Just seeing how much more little things frustrate you, like a wrinkle, or even your "annoying ring tone". Prob wasnt best time to record a video. Was much less enjoyable to watch seeing how bothered you were by everything. Hope things smooth out for you either way. Solid work
Not good work. Must be two for doing that 😂
The guy in back ground talks to much tell him to get to work.
Noooo cut out in the worst eyelid part to do 😭