Nice video next time fill the keg with Co2 first to purge the keg from air and then create a loop to the storage keg to transfer the beer to the small one
Hey bud. Nice video. Thanks!!! I Only speak English because I just can't retain another language. And I understood enough! SO NO GRIPE HERE! I'm assuming you just gotta keep working to push in the tire valve using the needle nose players until it locks in the groove of the rubber valves lower end, but how did you ensure any metal pieces from making the whole cleaned out? Just lots of flushing? And if you an inexpensive way to convert this refillable tank to not ruin the flavor while it's chilled in a Krup Beertender you will truly be my hero!
Miksköhän tommonen litrahinta on noin 50% korkeampi kuin tölkeissä? Eihä tommosen tekemeninem varmaankaan oo kalliimpaa ku et tekis erikseen 15 pient tölkkii?
Make the exact size hole as recommended on the valve box when you bought it. Then with some patience and a pair of long nose pliers you will get it. (not easy).
A+ for effort but too much work to clean and refill- just grab yourself a small 2 or 2.5 gallon corny, put a tap on top and dip her in an ice bucket. Ez to verify if it's fully cleaned thru hatch and ez to fill in a closed loop (no oxygenation of beer)with 5 gal corny keg... I only use my krups beertender for new Heineken kegs poolside If I don't want to burn thru ice... And I just reuse the tubes which are stupidity expensive...
Le titre est en deux langues, et le video est en deux langues, il n'y en rien plus qu'il besoin. There's really no additional information in French that you couldn't deduce yourself.
As others have said, the title is both in English and in French, as is the video. Jean is French Canadian, so he mostly speaks French and he tried to explain it the best he could in english as well.
![Kumamoto Masters Japan 2024 | Gregoria Mariska Tunjung (INA) [5] vs. Akane Yamaguchi (JPN) [2] | F](http://i.ytimg.com/vi/EIjZybhsWqA/mqdefault.jpg)
Nice video next time fill the keg with Co2 first to purge the keg from air and then create a loop to the storage keg to transfer the beer to the small one
nice idea
How do you insert the bicycle valve so clean
Inserting the valve is not the easy part. I use long nose plier and slowly press all side. Patient required.lol
Hey bud. Nice video. Thanks!!! I Only speak English because I just can't retain another language. And I understood enough! SO NO GRIPE HERE! I'm assuming you just gotta keep working to push in the tire valve using the needle nose players until it locks in the groove of the rubber valves lower end, but how did you ensure any metal pieces from making the whole cleaned out? Just lots of flushing?
And if you an inexpensive way to convert this refillable tank to not ruin the flavor while it's chilled in a Krup Beertender you will truly be my hero!
I don't speak French well enough to understand. Could you maybe do an English only video?
He's doing both here. Listen.
Just bought one n it had the green party but not the spout to pour from . What now workout damaging it
Come hai messo la valvola?
J'adore monsieur Jean! Le problème... C'est qu'à l'interieur, ce type de Keg a un CO2 bidule....donc pas très sanitaire si on veut le réutiliser.
le bidule a l'intérieur était là avec le bierre original. donc je ne vois comment cela pourrait affecter le niveau sanitaire.
Dior ??
Do I really need to keep it in the fridge for ten hours ?
Georges Saint Pierre’s uncle!
What language is that, French Canadian or Canadian French? It doesn't really sound like French to me.
Boy I thought he was speaking English
Comment as-tu fait pour faire rentrer la valve dans le petit trou? Je n'arrive pas. Y-a-t-il une méthode?
Any issue's with off flavor due to the rubber tire valve stem? I am looking to do something like this for a Krup's Beertender
always use for short term use. one night out. so no flavor problem.
Miksköhän tommonen litrahinta on noin 50% korkeampi kuin tölkeissä? Eihä tommosen tekemeninem varmaankaan oo kalliimpaa ku et tekis erikseen 15 pient tölkkii?
How did you get the valve stem connected?
Make the exact size hole as recommended on the valve box when you bought it. Then with some patience and a pair of long nose pliers you will get it. (not easy).
@@israeljean6118 I don't get it honestly... how do you you screw the valve on the inside part of the keg ?
Your name is what!?!
A+ for effort but too much work to clean and refill- just grab yourself a small 2 or 2.5 gallon corny, put a tap on top and dip her in an ice bucket. Ez to verify if it's fully cleaned thru hatch and ez to fill in a closed loop (no oxygenation of beer)with 5 gal corny keg... I only use my krups beertender for new Heineken kegs poolside If I don't want to burn thru ice... And I just reuse the tubes which are stupidity expensive...
Why start in english and then go to french and back to english?!!! Aaaaand then back to french.
What no speaking German I speak English. ?
why this dude speaking spanish
heineken 👎🏿 grolsch 👍
Tnc
If you label your video in English please continue in English, you could post sererately in your mother tongue.
Le titre est en deux langues, et le video est en deux langues, il n'y en rien plus qu'il besoin. There's really no additional information in French that you couldn't deduce yourself.
"Mother Tongue?" It's French, you uncultured swine.
@@Matt-ec7yb mother tongue is langue natale, there is no fault in user proper terms.
Oh sorry no espeke FRANCH ONLY English an Spanish help me out ??
Why u speaking this language ? Click bait
As others have said, the title is both in English and in French, as is the video. Jean is French Canadian, so he mostly speaks French and he tried to explain it the best he could in english as well.