Gigabyte Secure Boot Error | Enable secure boot for Windows 11 | Error: Disable the CSM in Setup
HTML-код
- Опубликовано: 3 окт 2022
- Enable secure boot Windows 11 on Gigabyte A520M DS3H motherboard.
PLEASE READ THE FULL VIDEO DESCRIPTION. THIS COULD LEAD TO NO VIDEO OUTPUT. IF THIS HAPPENS YOU CAN FIND THE SOUTION IN THE CONTINGENCY PLAN BELLOW.
DONT FOLLOW THIS VIDEO IF YOUR MOTHER BOARD IS NOT HAVING Q-FLASH PLUS OPTION! It cold lead to not be able so restore the video signal.
If you already have UEFI enabled, you can jump to 01:20
Error: Disable the CSM in Setup. Repeat operation after Reboot to ensure UEFI Video (GOP) driver is operational.
Error: Secure Boot can be enabled when System in User Mode. Repeat operation after enrolling Platform Key (PK).
This video is made specific for Gigabyte A520M DS3H. It might work also on others similar motherboards but it is not tested by us and could lead to problems without a solution from our side.
WITHOUT PROPER ABILITIES THIS COULD LEAD TO PC NOT BE ABLE TO BOOT. For this cases, on the end of the description is a contingency plan. Please be sure you have the right abilities to follow it, otherwise STOP and follow a more user friendly tutorial (If you can find one).
STEPS:
00:00 * First check Bios MODE and Secure Boot State. Go to start and type: System Information. If Bios MODE = Legacy, extra steps are needed to convert it to UEFI. For this "mbr2gpt /convert /allowFullOS" can be use but please check on-line how to do it. In this video it is only an example.
01:20 1. Restart and go to Bios (press DEL key);
01:46 2. Go to Boot and disable CSM support; Go to Secure Boot and try to enable it
3. If the error: "Secure Boot can be enabled when System in User Mode. Repeat operation after enrolling Platform Key (PK)" follow the steps. If this error did not appear jump to the step: 6;
02: 29 4. Set the Secure Boot Mode to: Custom.
5. (only for the ones with "enrolling Platform Key (PK)" error) Go to Key management and update the Platform Key(PK);
02:50 6. If the error from step 4 is: “Disable the CSM in Setup. Repeat operation after Reboot to ensure UEFI Video (GOP) driver is operational”, step 5 it is not necessary. Go to Save and Exit and select Save & Exit Setup and restart to Windows;
03:33 7. Restart to BIOS (DEL key);
03:56 8. Enable again the Secure Boot (This time shall work without any error);
04:06 9. Go to Settings, pick Miscellaneous, check and Enable the AMD CPU fTPM;
* If the Platform Key (PK) was updated, you can go and delete it. This will bring it back to the initial form. We think you can leave it enabled. We are using the PC with it enabled. After all it is some kind of security (trust) check.
10. Save and Exit to Windows.
11. Access again System Information the Bios MODE and Secure Boot State status. We shall see Bios MODE = UEFI and Secure Boot State = On
If this helped you, a like and subscribe it is really appreciated.
CONTINGENCY PLAN:
*If you are getting into problems try this:
- Use the HDMI from the motherboard to activate again the CSM Support. This will work only if your CPU have an "build in GPU" (IGPU).
- If you have an CPU without IGPU, you have the option to install the BIOS again using Q-Flash option from BIOS.
**For reinstalling the BIOS:
- you need an USB 3.0 flash drive (File format: FAT 32).
- Go to gigabyte website, search for your model and download & unzip the latest BIOS file.
- Copy the unzipped files to the FAT32 formatted USB Flash drive.
- Plug the Flash Drive in one blue USB port from the back of the PC
- Q-Flash can be accessed by pressings the END key at loading (like the BIOS but instead pressing DEL, you need to press END) or from BIOS, go to System Info. and on bottom of the page you can find the Q-Flash option.
- Install the new BIOS.
***You can also make an "back-up" of the current BIOS from Q-Flash
****
To reset de BIOS:
For Gigabyte A520M DS3H access the user manual from the link bellow:
download.gigabyte.com/FileLis...
Locate the CLR_CMOS Jumper on page 13 (noted with 16)
Page 20 is explaining how to reset the BIOS to factory settings with the CLR_CMOS Jumper.
if Jumper dues not work, unplug the PC and remove the CLR_CMOS battery for 10 minutes (even more if did not work with 10 minutes)
On the same page you can find how to use QFLASH_PLUS button (location on page 13, noted with 17). QFLASH_PLUS button is a tiny white button located near the SATA 3 Ports (your GPU could cover it depending on the dimensions pf it).
You can access an actual picture of locations from this Google Drive link:
drive.google.com/file/d/1AhXV... 
Наука
Guys i tried to solve my problem by watching this video and I had the same problem in the comments.If you can't even reach the BIOS screen that means you have that problem as well(black screen). You basically deleted the settings of BIOS. He says that the solution is in the description and it's working but the problem is it's not working for everyone and he doesn't know how to solve it perfectly as well. So, what i did is i sent my pc back to the place that I bought and they resetted the motherboard. My suggestion for you is , do the same like me. Because it's really stressful to trying to solve that problem alone if you are not so genius in computers. Yeah,that was my problem and how i solved it. It happened in my first day with my new PC. And do not worry because your windows and everything be alright if you don't change the whole motherboard. Good luck guys. After that read the comments before doing something on your PC.
Hello! Sorry for any inconvenience. This is the reason why I put the disclaimer in the video. This tutorial could lead to serious problems that could be solved only with proper technical skills. Basically you need to be able to reset the BIOS and the best way is to use Q-Flash Plus. Good luck and enjoy your PC!
@@oneclickro9981It hasn't been a week since I bought the computers, they broke down, I sent it to the place where I bought it, I hope it will be fixed.
Same error
@@oneclickro9981 Kuy
@@oneclickro9981 how to reset bios
Never would I have thought to come across such a specific problem and find a video that covers every single one, thank youuuuu
actually the goat, all other tuts only used latest gigabyte (red n black) and couldn't find anything for yellow. saved me + friend and let us play val
I'm glad it helped!
thank you very much could not find a solution to the problem and suddenly found you and everything worked
Only place on the internet that clearly says how to reset from setup to user mode. Lifesaver
Turns out i had secure boot enabled but all i had to do was reset the factory keys for it to actually work. If it wasn't for this video i would have NEVER tried that, THANK YOU!!
IDK if i'm writting well but man you really help me!!! I was trying to fix this since 5 hours and all the tutorials don't worked for me but yourss omg thsnks greetings from Ecuador ily hahah
Thanks broda, first tutorial that actually works for me, i was about to surrender
Glad it helped!
you saved my life, my computer isn’t turning on anymore 🙏🔥🔥
... hello. First, I'm sorry you have problems. Second, please don't blame me for your decision to follow this tutorial. I know some users can get into black screen problem, that's why I put the warning in the video, video description and everyone is free to comment about the problems. The point is, you cannot find another better way to do it, that's why I keep the video online, for the ones that want to take the risk and are able to use Q-Flash to solve the problem. Now, please go to contingency plans part from video description, it shall help you. Thank you!
--SOLUTION--
1. With CPU turned off and alimentation disconnected, disconnect graphics card.
2. Take the hdmi to VGA entry (integrated motherboard graphics card).
3. Run the computer and put bios settings to default.
4. Run Windows as normal (after applying and saving changes).
5. Turn off PC and disconnect alimentation cable.
6. Connect your graphics card (previously disconnected).
7. Run Windows.
- Now you should have display video as normal. - YOU ARE NOT GOING TO BE ABLE TO PLAY VALORANT, BUT YOUR PC WILL WORK.
Feel free to ask any questions. Secure boot is only to run PC with minimum hardware as possible, you dont have video because your PC aint recognising your graphics card, or other hardware, because the command is telling PC to do that.
❤
@@LUGASLUG thank you! Very good solution. This will work only if you CPU have an integrated GPU (iGPU).
Bonjour a tous,
J'ai également eu le soucis de l'ecran noir, j'ai essayé un clear cmos via la pile etc rien n'a fonctionné.
J'ai trouvé la solution qui pourrait marcher pour certains je ne garantit rien, il vous suffira de debrancher votre carte graphique de la carte mere, de brancher votre écran sur la carte mere et ainsi vous aurez de nouveau accès au bios. Effacer tout les parametres que vous avez effectué et tout devrait revenir
Bro this actually worked thank you so much for the efforts 😁
Glad it worked!
Damn this worked bro, thanks for the turtorial
Also if u encounter a bios problem after this, just boot the second UEFI bruv, gigabyte mainboards always have 2 of them
I disabled the CSM and then when the computer rebooted it led to the screen where you say to press delete. But when I get to that screen I press the key to acess the menu but its not working. just stuck on the gigabyte screen. PLEASE HELP!! I have no idea. what to do because it seems like i cannot do anything via keybaord.
One thing that i don't understand - if the bios needs to be reinstalled or restored how can i able the secure boot if the error continue to appear after you resetted the bios and retried to do it? It means i cannot?
Thank you i fixed it 😊👌
My pc boots up with no display now.. wow thanks a lot
Thank you!!!🎉🎉🎉you are a god🎉❤
Glad it helped
tysm for the help man
Thanks. It helped me.
Thank you so much!
Glad it helped!
Thank you bro you saved my life
Why is my screen black, I just got this pc and it took my two years to get it please someone help me
J'ai eu l'écran noir j'ai essayer de clear CMOS pile/jumper, me brancher directement sur la carte mère mais rien ne sais passer juqu'au moment ou mon pc a pris feu ....... non plus serieusement repasser à la version précedente du bios ou a la nouvelle ci pas encore faite a l'aide du Q-Flash plus et tout reviendras en ordre (B550 Aorus elive V2)
Gooooooddd jobbbb , 04/2023 💪
You are a genius! Thx you finaly i can play valorant
Great now my screen is black and won’t turn on thanks for the help
THANKSSSSSSSS BROTHER, LI LOVE YOUUUU🎉
Thanks man it really helped ❤
i need help i've been trying this for hours basically, andi it doesn't save when i disable csm, so i can't use the secure boot does anyone know what do i need to do?
I have been trying to solve this for hoursss, have you fixed it? Please tell me 😢
Bro You are the Best!
Glad it helped!
Ty bro, it works!!!❤❤❤
Bro I got a black screen how do I fix this
After updating platform key at 2:58, another message popped up asking me if I wanted to reset without saving and I pressed yes. Now my computer turned black and my hdmi2 won’t be recognized
U just earned a sub
Hey bro I apply you say all but now my pc is not started fan is running but Desplay not showing bro 😢 how i fix it 😭
Thank u so much !!!
Glad it helped!
WONDERFUL. SCREEN WONT TUTN ON ANYMORE. this is literally gonna be my thirteenth reason.
Thank you bro ❤️
Thanks, i can play faceit again!
Worked for me nice easy and simple appreciate it brotha!!!👌🏼
Glad it helped!
Will this effect anyone on windows 11
Thank you.
Also for anyone wondering press enter than f10 to save.
Thanks for the completion!
Thanks!!
Thank you ❤
Glad it helped!
Hello bro I have a problem is my first day on my pc and I tried this video because I need for faceit and when I restart it dosent start anymore can you plz help bro
Hello, please check the video description, contingency plans part. It will help you. Q-Flash is a good option but try others first.
How to i make go to windows and restart 3:31
I have enabled secure boot and it says it “ not active “
Buenado hermano gracias
Cuando les tire pantalla negra, deben actualizar la placa a la primera version de la placa para eso deben ingresar en mi caso a gigabyte y bajar la bios f5, primero deben retirar su tarjeta grafica y apretar el boton de qflash_plus y con un destornillador juntar los dos pines de clr_cmos y el pc encenderá, en caso de que su procesador no cuente con graficos integrados es el mismo paso, solo que una vez que se prenda y apague las veces correspondientes deben conectar su tarjeta grafica y conectarla y se restaurará su bios
Bro, necesito tu ayuda
Tengo un i5 12600kf y una 4060, ¿me podrías explicar de una forma más sencilla?
No puedo ni entrar a la bios
My computer is broken, what should I do?
i tried this thing and i dont have more image, i have to reeinstale my bios know and it will take a lot more time because this didnt worked
Hello there. In the video description, contingency plan part you can find what to do.
Thanks bro❤❤
Hey I got the warning csm setup and I did what you told me to do but when I went back the csm support is enabled and it just keep on repeating the same problem
It’s been happening to me for a longgg timeee. Have you fixed it? Please tell me 😂
Thx bro❤
so i have tried your contingency plan, tried resetting the battery, tried everything everyone has recommended me, including both the things you recommended, but my pc is still not working. If you could respond that would be great as i’m panicking that i will never see my pc on my monitor again and as i’m to broke to afford a new part of new pc i need a solution.
x2 :(
Lmao
try using HDMI port instead of Display Port i am still working on correcting this but this seems to work better than any of these bs tutorials
Did you use the q flash plan for resetting the bios
@@KigerTrolls I have it working now, i just had to enable CSM and reinstall windows.
MBR2GPT will now attempt to convert the default book disk.
If conversion is successful the disk can only be booted in GPT mode.
These changes cannot be undone!
MBR2GPT: Attempting to convert disk 1
MBR2GPT: Retrieving layout of disk
MBR2GPT: Validating layout, disk sector size is: 512 bytes
Disk layout validation failed for disk 1
Thanks man you fried my mother board
i finally make it but i have to buy a chip programmer for reflash both bios
my pc its in a black screen forever 🔥🔥🔥🔥🔥🔥 thank you 🗣🗣🗣
Why did I clicked on this video? My screen is full black. I did try it to unplug my graphic card and do HDMI cable through the motherboard. Don’t work. I put out the battery. Don’t work. Nothing works.
Sameeee !!! Do you fix It??
i had to bought a new mainboard sadlyy
You have to manually reset bios
bro my pc turned black brooo what to do now
Following the contingency plan with no IGPU, how does the Q-Flash work? I put the USB in the blue usb for the BIOS and click the Q-Flash button on my motherboard but nothing happens.
Just have patient, it could take some time. Also be sure you have the correct file on the USB.
I fixed an comment of how to do it. Good luck and let us know when you solve it.
I literally just don’t have a secure boot option in my bios and it’s gigabyte
can you help me i did the usb and qflash but its not working. the lights are not turning on.
Hello, you need to wait some time. Also please be sure you followed all the steps. You can find a lot of tutorials online of how to do it.
Cant find csm
Thank you ❤️❤️❤️❤️❤️❤️❤️
Glad it helped!
Man please help i did everything in the video but now i have black screen and my pc is beeping when i boot up
Hello, just the steps from the video description. Q-Flash Plus will definitely help you but try others first.
You broke my 1600 $ pc thank you
I did everything you asked, except that the computer is not showing an image
A mi me paso exactamente lo mismo
Hello, sorry I was out for a while. You have all the answers in the video description. Hope you already find a way to solve it.
@@oneclickro9981 I tried everything in your description and still have no power to my monitor, please please help me 🙏🏼
@@kanok_a Q-Flash Plus didn't work? Please search online how to do it. It I impossible to now work because will reinstall your BIOS.
Now my pc is broken, thanks (black screen)
No contingency plan or anything. My pc won't turn on thanks to you. You're talking about making flash and my only pc is the one that doesn't turn on, how the hell do I do it? You have earned a good complaint
Hello! I really understand your frustration. Frankly, I also think you are asking the wrong questions. At the beginning of the video it is a very clear warning that this can go wrong and that can be solved with Q-Flash. I don't understand why you tried this tutorial without a possibility to do it ....
after i disabled csm support and saved, it would still be enabled after i restarted and went into bios
Hello! There could be two reasons: you are not following exactly the steps or there is a reason why it dues not allowing the disable, could be some link with the video. I strongly recommend to try to find another way to do it because those could lead to o video output and you will be forced to use Q-Flash Plus to reinstall the BIOS.
dont do this all, i broke my pc after step 4
Thank you, you broke my computer it's only black screen
Same
@C3cha have you fixed it yet?
Me too
как исправить?
How to fix
System mode utente? Alguien me ayuda, me sale ese nombre utente
I pressed it and it hasnt came up
Thankyouu
Thanksss
Hi Man, the PC doesn't turn on again...what can I do?
reset cmos, gigabyte is fucking bad
Hello! Follow the steps from video description, contingency plans part. Q-Flash Plus will definitely help you but try others first.
Thnks bruh by d way im from
Philippines ❤❤❤
I follow your video to do it, but the computer screen is black, what should I do?
Plz help me
-Got frustrated while playing csgo bcs of 3 cheaters (2 games in a row)
-decided to go back to faceit
-had to do this shit bcs of faceit ac
-fucked up pc
-now I got to such a level of frustration that I am just looking at the black screen and thinking about life in general
-sweet
thanks you broke my pc😢😢😢😢
Ben yaptım ekran gitti kara açılmıyor
2:55 After this step my screen went off
Hello, the problem is from the video driver. If your CPU have an integrated GPU (iGPU) remove the video card and put the HDMI cable intro the motherboard slot. If not, you can try to reset the motherboard or to use Q-Flash Plus to reinstall/update the BIOS.
@@oneclickro9981 i don't have Q-Flash Plus
@@drictx6063 hello. Without Q-Flash your options are not that many. Please read the video description, contingency plans part. It will help you.
@oneclickro9981 hi i also have a black screen and i wonderd if i buy a new moderboard.Will it be fixed then
Yea do not use this guys video. After you click save and exit you r stuck with a black screen and you pc will not want to boot up with display
Hello! I'm sorry you are in troubles. To solve it, Q-Flash is an good option, please check the video description, contingency plans part.
@@oneclickro9981 nawww mannneee my hole mother board fried thanks tho lmao they tryed all that shit once again dont trust the vid just remove it if it giving people trouble
Bonjour a tous,
J'ai également eu le soucis de l'ecran noir, j'ai essayé un clear cmos via la pile etc rien n'a fonctionné.
J'ai trouvé la solution qui pourrait marcher pour certains je ne garantit rien, il vous suffira de debrancher votre carte graphique de la carte mere, de brancher votre écran sur la carte mere et ainsi vous aurez de nouveau accès au bios. Effacer tout les parametres que vous avez effectué et tout devrait rentrer nickel
Idk why ppl are saying Ts work it broke mines
My 1 day old pc broke. I should read the comments first lol
Bro can u PLS help me i was doing one of the steps and it told me to restart my computer and i did. but now my pc turns on and nothing shows up on my monitor and it’s not my monitor it’s fine. PLS help
Same as me idk i think this guy is a scam
@@abdimalik6902 nvm i fixed it
@@v1t0r85 how did you solve it?
Someone plz help
@@ulisesgonzalez6256 basically i plugged the usb into the mother board instead of the graphics card and it worked i also took out the graphics card and put it back in
I got hdmi no signal and blue screen :/
I try to clear cmos but not worke pls help me😢😢😢
I try 4 video but onluly this work
No lo hagáis yo lo e probado para jugar al valorant con Windows 11 y cuando tocas lo de las llaves se actualiza y ya no tengo señal de video , me estoy volviendo loco intentado que vuelva a funcionar ,
Lo arreglaste ?a mi me ha pasado lo mismo, que tengo que hacer??
en mi caso cambiar la placa base ... se fundio @@user-pn4sp4dm7i
How do I unblacken my screen
Hello, sorry I was out for a while. You have all the answers in the video description. Hope you already find a way to solve it.
Bro you need to just delete this it didn’t help anyone and it’s just breaking computers ur making no profit off of this
My cpu doesnt have an igpu and i cant find the qflash button. Can you tell me where it is and if i dont have it can i just buy a new motherboard?
Hello! Sorry for getting into problems, if the motherboard is the one from the description you can find all the details in the description. If not... I wold say we have a chance to reserve the motherboard using the CMOS battery or with the jumper. If you try the jumper be sure that the PC is connected to a energy source, with the battery you need to unplug the PC. Hope it will solve the problem.
@@oneclickro9981 What is the jumper?
@@KigerTrolls please Google of "pc jumper"
@@oneclickro9981 Where can i find it in my pc or do i have to buy it
@@KigerTrolls hello. You have some jumpers on the motherboard. If you have the same model of motherboard like the one I tested for this tutorial, please go to the video description, contingency plans part and you will find a picture with the location of the jumper.
You save my life thx, the hateful comments are simply those who have bad PCs, not your fault in any case, it works for me and it's perfect I can finally play Valo again
I'm glad it helped!
The tutorial is good, but most people have a different issue after disabling CSM, so the title is confusing, he is just showing how to deactivate CSM not how to fix the boot issue
@@oneclickro9981 i scare something will happen to my computer if i do this
Bonjour a tous,
J'ai également eu le soucis de l'ecran noir, j'ai essayé un clear cmos via la pile etc rien n'a fonctionné.
J'ai trouvé la solution qui pourrait marcher pour certains je ne garantit rien, il vous suffira de debrancher votre carte graphique de la carte mere, de brancher votre écran sur la carte mere et ainsi vous aurez de nouveau accès au bios. Effacer tout les parametres que vous avez effectué et tout devrait rentrer nickel
Bonjours comment avez vous fait pour brancher votre écran avec dans votre carte mere
Thanks you broke My computer
Thank You for broken my pc 🎉
Why does mine say ufem but secure boot is off
Hello, because you didn't enable it.