How to Make Bluetooth Controlled Arduino robot car with Automatic Path Tracking | TechNow
HTML-код
- Опубликовано: 30 мар 2020
- This video will give an idea about making a Smart Robot Car with many features like obstacle avoiding and moving to any destination already programmed. This robot can be utilized after proper scaling it up for industrial use, to deliver materials such as food packets or medicine to a remote destination, say Isolation wards of a hospital or nursing home. This feature of the Robot is achieved by suitably coding for tracing the path with commands for a particular destination and storing those commands in the memory(EEPROM of the Arduino board) for future use.
Hardware requirements for this project:
1. Arduino UNO board
2. AF L293D Motor Shield
3. BO motors DC with wheels(4x)
4. Servo motor SG90
5. Ultrasonic sensor SR04
6. Bluetooth module HC05
7. 3.7V 18650 Li-ion Battery 2600mAh(2x)
8. Tp 4056 micro USB battery charger
9. 18650 Battery holder
10. Toggle switch
11. Sunboard 3mm
Link for downloading the code:
drive.google.com/file/d/1yxvB...
Given below the links of others videos:
1. COVID-19 | Coronavirus | The Smart cap using Arduino Nano and Ultrasonic sensor | TechNow
• COVID-19 | Coronavirus...
2. [HINDI] Home Automation using Arduino Nano and Bluetooth module HC-05 | TechNow
• [HINDI] Home Automatio...
3. [HINDI] IOT Projects | Keyless Entry | Smart Lock | Home Automation using Arduino IDE| nodeMCU|Blynk
• [HINDI] IOT Projects |...
4. [HINDI] IOT Projects | Voice Controlled | Home Automation using Arduino IDE | nodeMCU | Blynk| IFTTT
• [HINDI] IOT Projects |...
If you love watching this video please hit the Like, Share and Subscribe.
If you are having any question regarding this video please post it in the comments section below.
---------------------------------------------------------------------------------
#ArduinoRobotCar #ArduinoRobot #SmartCar #ArduinoProject #ArduinoTutorials #DIY 
Наука
![Eminem - The Death of Slim Shady [Album Trailer]](http://i.ytimg.com/vi/X0HIrS6kUYI/mqdefault.jpg)
Great work !!.....can you please make a video on automatic and manual modes of operating of any one of the actuators using NODEMCU.... please
Baaha...darun...❤️
Awesome idea
Great job 👍
Awesome 👍
Great job
Sir is this line following robot and we can use with 60 rpm geared motor
Hey can we do this with only 2 motors instead of 4
can i do it with hc-06?
How to MAKE this robot please make video
How can we save room numbers in the app..or is it done in the code
Idea is simple - I add the compass and the robot always run the right direction ( even turn many times )
Sir, will this program run with 12v dc motor ??
how do you activate the Obstacle Avoidance feature of this robot
Bro use Moter Driver L298N ❤😊😅
Sir without charger module can we make this robo model ?
hellow can I see the circuit diagram for the Arduino UNo?
can you explain how memorizing path is made
Sir can you give me the link of research papers on which you made this project
How you make this ?
Can u expalin the programing 🙂plz if possible
where to get the bluetooth controller hc-05 app i cant find it on playstore any link for that ?
Awesome project , but u didn't showed how to save the path of particular room using Bluetooth app
I also want to know this….
sir please share stop command
why AFMotor not found in sketch? :
pasting sticker and remembering path is easy , without any sticker I want to do the same. any idea ?
save macro path in EPROM or Flash memory
Sir I'm getting "programmer is not responding" can you help me out in solving this problem?
i made all this but it doesnot work well
how to stop the rover function ? pls tell
and again start the bt function
In the code why the forward motors speed is high like (i+3) and backward motor speed is slow like (i-25) please help anyone 🙏
What is the command for room 1
Link for code already given
sir give connection video plz
connecting both is so easy just connect bt first than open app work done.
Can we use l298n motor driver
yes but than u need to do some changes in code
@@ankitpandey8435 Thanks Ankit can you please tell me what changes I should do
Your code showing errors plz check one's for me sir
Sir ye video hindi me
Can we use hc 06 then will the app support
I hv no idea abt it.
@@technow9580 ok
Yes bro you can use it
@@littleneutron2056 hey can u tell me how to set the path points..
Sir can make the same car using raspberry Pi
yes u can but that will be so time wasting and costly. i will prefer u to run os on ur resbiripy if u have one
Sir how much did it cost pls reply soon....🙏
Costing will be around Rs 2000
Could you please give me the schematic of this project?
Hardware connection diagram already given at the end of the video. Please go through till end
@@technow9580 then sir what is the bluetooth app( name) was used in here?
Bluetooth terminal hc05
@@littleneutron2056 thanks lot
sir plz provide report
Plz give me the codes of the app
App name
Your code have so errors
Add cammera
Sir Which app do you use to control the car
I hv used 'Bluetooth Terminal HC-05' app downloaded from playStore
Sir pls tell how to code bt app
my device do not support cut/copy/paste or any thing else am sorry can't help u in feature if i change my device then i will try
@@ankitpandey8435 tzk00014@gmail.com
this is the email plz send the link on this address
@@ankitpandey8435 please email it
@@ankitpandey8435 please share the code i really meed it
@@tabishzubair5646 drive.google.com/file/d/10p6-fEgK16VJkdbY-KFuHHtbQHnqf0xm/view?usp=sharing.
this is link of video in which I have explained all working about that car. just watch it for over view
Can you give me the code only for path tracing? Like I have to combine it with my code . @TechNow
sir can you provide me any email or a number to communicate with you. I am a design student working on a project right and would like some guidance regarding a project very similar to this video but with a little changes