Nintendo Switch Pro Controller | Disassembly Guide
HTML-код
- Опубликовано: 21 авг 2024
- In this video, we take a look at our installation guide for completely disassembling your Nintendo Switch Pro Controller!
Written Guide
wiki.handheldl...
Required Screwdrivers
www.ifixit.com...
HHL Online
Shop: handheldlegend...
Wiki: wiki.handheldl...
Instagram: / handheldlegend
Twitter: / handheldlegend
Facebook: / handheldlegend
Tik Tok: / handheldlegend
Much appreciated, used your guide to install SNES colored buttons on my Splatoon 3 pro controller
that sounds dope, u gave me a good idea.
Helped me fix/clean out a gunked up controller Thank you!
Helped a lot to clean coca-cola from the buttons! Thank you!!
Thank you, this helped me fix my stick drift and fix my loose battery
thx! finally a full teardown
Thx for the tutorial. Now i can clean my controller.
(Edit: be careful when taking out the battery as you can bend the pins out the hole. to bend them back in just take something with a fine tip and push the pins back into the hole(
Thanks for the awesome guide!
Omg thnx. This was the 4th video I watched and the only 1 that showed me the little black piece that fell out while i was trying to get out a screw that fell into the controller
super easy to follow. thanks alot.
First 2 screws are impossible to remove for me. I think I stripped them. 😕
Me too... Still fixed my drift, but future repairs and cleaning will be difficult. Nintendo really didn't care about quality control on the Switch. I had 0 troubles with 3DS
Hey, did you end up finding a way to remove them? I had this problem recently and found a solution
@@RED-9448 Never did. I gave up. Before I ever try to unscrew another Nintendo Controller, I will get a JIS screwdriver set.
@@Tav_cr Yeah, that's probably the best idea
But if you want to try to replace the stripped screws, you can try to make a hole in them with a drill
Just use a small drill bit, smaller than the head of the screw, and after that use a Torx screwdriver that can fit tightly in the hole
You should be able to take them out
W for all of it even tho I only needed the home butten
hello, i am having some problems with the steps from 0:49, all the screws is there seem like they're glued. none of them will even hit at unscrewing no matter how hard and/or steadily i turn the screwdriver
think you have any advice? thanks
Same for me. My ex broke one of the triggers. I bought the replacement from Ebay but can not open the god damn thing. I think I stripped the screws just trying. Really annoying.
Make sure you use a good screwdriver. I have a I fix it kit but as he says the driver does not fit good. I use a Wiha to remove those..
Awsome discription how to open it. Many thanks
There is no instructions on the wiki site for a Pro controller.
Good video so backstory some water spilled on my controller and idiot me thought of shaking the water out. I disassembled the controller and saw no water damage but the remote before i disassembled was glitching and the controller wasnt working. I pulled everything apart and put it together and now not even the lights are turning on 😢😢. Help?
How many pins does the ribbon cable need to be? I count 18 pins on my own, replacements online say 14 pins. Im so confused!!
How can I apply my ribbon cable perfectly, also is the white ribbon cable responsible for A,B,X,Y & Also Dpad. Please respond
What can I do if the white pieces do not have screws and I cannot remove them by pulling?
where do you get that joysticks ???? they look good
At 2:26, I'm having trouble removing the board. I've removed all of the screws and vibration thingies, but it seems like there is tension near the top left part of the board/the area near the USB C connector. Anyone have this issue too? It seems like it comes out very easy in the video, but it isn't for me.
There's supposed to be a metal piece at 3:13, but bro never shows how to take it out
having to get a separate screwdriver just for this triggered me.
Excuse me, do you know how I can find a replacement for the gray ribbon battery cable? I've been trying to find a compatible cable or the exact cable but I can't find anything
Have you found anything?
@@yasingunaydiin nope, but I see that it looks very similar to the data cables that disk readers or hard drives used, such as IDE cables.
@@retrofox51_yt7 mine is an 18 pin cable but on aliexpress it says 14 pin switch pro controller
@@yasingunaydiin I think you should try the one indicated by the cable of your switch controller.
Rubyyyyyyyyyy
Completely skipped an entire step