Hey dude, that piece wasn’t broke. Mine was making the same noise until I did a correct reset. You only plug the male grey into the black female plug then turn key on wait a few seconds unplug the tiny plug and wait a couple seconds then turn key off and rearrange in proper order. Then your good to go.
where does the wire coming off of the "box" switch on the left of the actuator plug into ? Mine isn't plugged into anything and I can't find where it plugs in! I believe my bike's in limp mode but the check belt light isn't on, thinking its because of this unplugged wire. Help!
you had a lot of good info I could not hear, you voice is too low and that unneeded music made matters much worse; so I had to turn off your video mid way and learned nothing from your video because I could not hear you
I got a o3 pairie 360 ok I went to ride it an my high wouldn't shift into h at all so I said I'll try low an it worked in low then I said I'll try my r on it an it work but I went back out to ride it an it would ride in low an go but the next day I went to go ride it an it won't shift into any gears an I got oil in rear end an in eng just won't shift or go in any gears now if any one can help me out with this let me know
Have to agree the music wasn't necessary and sucks
Dude. The music. Jeez
Hmm, will definitely look at this now ... I'll let you know how I go 💪
Hey dude, that piece wasn’t broke. Mine was making the same noise until I did a correct reset. You only plug the male grey into the black female plug then turn key on wait a few seconds unplug the tiny plug and wait a couple seconds then turn key off and rearrange in proper order. Then your good to go.
most are that way my actuator was just bad
I would like to have watched the full video but I couldn't stand the music.
Turn the music up louder so we can hear you silly
where does the wire coming off of the "box" switch on the left of the actuator plug into ? Mine isn't plugged into anything and I can't find where it plugs in! I believe my bike's in limp mode but the check belt light isn't on, thinking its because of this unplugged wire. Help!
Would be great to post again without the music. Could help ?
It was the little plug with two wires.
Was the switch in the cover in the on or off position?
you had a lot of good info I could not hear, you voice is too low and that unneeded music made matters much worse; so I had to turn off your video mid way and learned nothing from your video because I could not hear you
I got a o3 pairie 360 ok I went to ride it an my high wouldn't shift into h at all so I said I'll try low an it worked in low then I said I'll try my r on it an it work but I went back out to ride it an it would ride in low an go but the next day I went to go ride it an it won't shift into any gears an I got oil in rear end an in eng just won't shift or go in any gears now if any one can help me out with this let me know