04-00024 Hydraulic ball-joint puller
HTML-код
- Опубликовано: 5 окт 2024
- New, unique design and function for dismounting the conic bolts on passenger cars and light commercial vehicles with ease. The tool is developed for the new front suspensions with longer conic bolts often fitted in aluminum cones. These fittings sit harder and are also more fragile than the older steel versions. The press tool has two different heights to choose from, 61 or 73 mm. Stroke 25 mm.
The anvil tool has two different opening sizes, 26 and 32 mm. Both of the tools can switch positions for superior access in tight areas of the wheel suspension. The hydraulic cylinder presses 4,5 Tons and gives a safe and problem-free disassembly. To increase the safety even further the tool is delivered with a safety strap. This will prevent the tool from falling down during operation.
The tool is used with a 700 bar hydraulic pump 1030, 1035 or 1036.
Pat Pending No. EP17179578.4 and US Patent Application 16/021.868
More on this product:
US & Canada: wallmektools.c...
All other markets: www.wallmek.se...
----------------------
More information on our products:
US-market: www.wallmektoo...
Other: www.wallmek.se
Instagram Swedish: / wallmek.se
Instagram English: / wallmektools
Facebook Swedish: / wallmek
Facebook English: / wallmektools
LinkedIn: / wallmek-i-kung%c3%a4lv-ab
E-Mail: info@wallmek.se
Telephone: +46 (0) 303-58580
Telephone US & Canada: +1 646-585-0524
Holy shit!!! I want one of these!! I just pounded on mine with a pickle fork for 2 hours.
Send us an email and we will help you, info@wallmek.se
Same 😢 in the end a bigger hammer did the trick
The unit is hydraulic not pneumatic. The pump is air over hydraulic meaning compressed air operates the hydraulic pump and the hydraulic pump operates the press therefore the press is hydraulic.
Ball joints and tie rods are different. Also, no ball joint was pulled out of it's housing in this video.
This tool presses out the conic fitting on ball joints and tie rod ends. We have other tools for replacing the ball joint. Visit www.wallmek.se or www.wallmektools.com (US and Can) to learn more about faster and safer automotive jobs.
You mustve only watched the first thing they pulled, they pulled tie rod end, then rearward lower ball joint then rear knuckle tie rod end then a upper ball joint , pay attention because i count 2 ball joints and 2 tie rods they popped loose thats the point of the tool to pop them free
It's hydraulic and needed on newer cars with alu knuckle.
Do this one work with air compressor without hydraulic pump?
The hydraulic pump is needed.
Love to have this, available in US?
Yes it's available in US, wallmektools.com/product/04-00024-hydraulic-ball-joint-puller/
Send me a mail at info@wallmek.se if you need more info.
What "BUTTON" are you Pressing to make the Ball Joints disengage ?
You're not even showing this.
We are using a hydraulic pump to all our cylinders. Both hands are free to do the job safe. Visit www.wallmek.se or www.wallmektools.com to learn more.
@@stenjohansson4938
Thanks for the speedy response.
I need a heavy duty one...no way this is going to pop one from a 1 ton Dodge ....
Hi @whodatintx165 this will do the trick. We have a bigger one to ruclips.net/video/HVl73gI_LNo/видео.html but that is for semi trucks etc.
I can send you a quote if you'd like. Send en e-mail to us at info@wallmek.se
Any good tool to extract the really tighten handle out from a Grohe faucet?