Hola Miguel, gran proyecto ese tuyo, muchas gracias por compartirlo con todos nosotros, una pena que no lo haya hecho a tu publico Hispano parlante, que por cierto somos muchísimos mas los que te seguimos, pero ese pequeño fallo no te desmerece como un genio, saludos y seguid así agraciando nos con tus ingenios...
First of all, thanks for sharing your nice work with us! I have a few questions: Is it skateboard wheels that you make the spools out of? How have you made or got hold of the white ring that holds the bobbin?
Bueno la verdad depende de tu capacidad de entendimiento... Yo diria ke es tan solo uno!! pero tristemente existen muchos ke nesesitan verlos todos "Los Videos" para tener una buena comprencion! Mucha suerte en tu futuro.
Contragulations for a simple but superb design and so very easily made. Truly a very worthwile post. contragulations again and all the very best to you.
Migueldeservantes I will most certainly build your excellent toroid winder but will run the motor at a slower speed and so obtaian a neat job.After all i am not going to wind hundreds of toroids so what's the hurry. Congrtatulations again and again
Vivian Astridge Well the first motor was super slow.... to the point that was becoming very annoying that was the reason I change to the second one, "Be the way the second one "Have a two speed gear box" so in speed one is also annoyingly slow! but is very good with the thicker wire and give a much better presentation.
Vivian Astridge you should check this video at the minute 4 it show it working very slow! Toroidal Winder kit with downloadable part 4 winding two toroids!
Migueldeservantes thank you for your suggestion. Yes i did see that part where the machine was working at the speed i would run it. It works perfectly and it cannnot be faulted on any account. I would bever have t hought that such a complicated machine could be redesigned to sucy a beautifully67 simple madhine that could be made at home. Well done and congraqtulations again. I wish you the very best. Thank you for your excellent, working design but most important of all its total simplicity. You are definitey a most clever person.
The scale is 1:1 basically is to take a print and glue it to a piece of plywood and them cut the outline, I don't think that it can get any simpler! :-)
Hope you don't mind, would you please ask that question again? what instruments are your referring to? I mean, I manufacture the Winding machines... and wire my own winder counters.. but that is about it... so please elaborate and help me to understand you.
Hola, e estado tratando de haser esta máquina pero cuando el alambre a a dar la vuelta en el núcleo se traba en el aro, porfavor podría usted ayudarme con esa parte?
Creo que para poder entender mejor el funcionamiento de esta maquina seria mas facil si usted toma el tiempo de ver otros videos los cuales muestran como cargar el carreto o "Bobbin" porfavor (ases Click en la " i " y ves los otros videos) gracias por mirar nuestros videos.
Yes I use the wrong motor, but it was the end of the day! and I just wanted to test the machine! later on I'll choose a more adequate motor! thanks for the comment!
Es muy interesante este video para mi, viendo estas imagenes nos dá una idea cabal de como hacer una maquina embobinadora para toroidales.Atte. Hermógenes
Well, Yes you are totally correct, but for a hobby machine it is hard to make extra parts.. keeping in mind that those accessories have to be made really small and really durable... so do you have a option or example of an simple cheap and easy to made slider?
But what do you need, the plans so you can make your own?? or you need the parts... or you need the machine already made and assembled??? (mac-s-power.com/HOBBY-ELECTRONICS_c2.htm)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Hola Miguel, gran proyecto ese tuyo, muchas gracias por compartirlo con todos nosotros, una pena que no lo haya hecho a tu publico Hispano parlante, que por cierto somos muchísimos mas los que te seguimos, pero ese pequeño fallo no te desmerece como un genio, saludos y seguid así agraciando nos con tus ingenios...
Fantasic work Miguel! Any chance of putting a scale on the plans?
You are very welcome. Thanks for watching my channel.
First of all, thanks for sharing your nice work with us!
I have a few questions: Is it skateboard wheels that you make the spools out of? How have you made or got hold of the white ring that holds the bobbin?
Cool !! What's that music in the part before 01:10 , please ?
Lovely, fantastic, great 👍 Yes of course your deeds is contributions of innovation
mmmmh... ¿y cuántos capítulos tiene tu invento...?
Bueno la verdad depende de tu capacidad de entendimiento... Yo diria ke es tan solo uno!! pero tristemente existen muchos ke nesesitan verlos todos "Los Videos" para tener una buena comprencion! Mucha suerte en tu futuro.
Really nice work! but didn't you use the wrong motor?
Contragulations for a simple but superb design and so very easily made. Truly a very worthwile post. contragulations again and all the very best to you.
Thank you. Much" really appreciated. Hope you can do your own soon and enjoy the pleasure of making your own ChoKes and TranSformers. :-)
Migueldeservantes I will most certainly build your excellent toroid winder but will run the motor at a slower speed and so obtaian a neat job.After all i am not going to wind hundreds of toroids so what's the hurry. Congrtatulations again and again
Vivian Astridge Well the first motor was super slow.... to the point that was becoming very annoying that was the reason I change to the second one, "Be the way the second one "Have a two speed gear box" so in speed one is also annoyingly slow! but is very good with the thicker wire and give a much better presentation.
Vivian Astridge you should check this video at the minute 4 it show it working very slow! Toroidal Winder kit with downloadable part 4 winding two toroids!
Migueldeservantes thank you for your suggestion. Yes i did see that part where the machine was working at the speed i would run it. It works perfectly and it cannnot be faulted on any account. I would bever have t hought that such a complicated machine could be redesigned to sucy a beautifully67 simple madhine that could be made at home. Well done and congraqtulations again. I wish you the very best. Thank you for your excellent, working design but most important of all its total simplicity. You are definitey a most clever person.
The scale is 1:1 basically is to take a print and glue it to a piece of plywood and them cut the outline, I don't think that it can get any simpler! :-)
What happened to the downloadable plans?
Thanks your comment is really appreciated
great , thank you so much for doing this miguel . i cant wait for part 2 !
Can I order an instrument of the manual's manual charge how much it s worth?
Hope you don't mind, would you please ask that question again? what instruments are your referring to? I mean, I manufacture the Winding machines... and wire my own winder counters.. but that is about it... so please elaborate and help me to understand you.
Hola, e estado tratando de haser esta máquina pero cuando el alambre a a dar la vuelta en el núcleo se traba en el aro, porfavor podría usted ayudarme con esa parte?
Os atreveis a aser un pequeno video para poder ver y identificar vuestro problema??
Man your work is AWESOME, thanks for sharing knowledge with us
Thanks so very much for your comment!
hi, in what country you are?
O needded of the project This os possiblle
Очень интересно, только не понял тут будет внешняя подача провода или на кольце намотан запас ?
Creo que para poder entender mejor el funcionamiento de esta maquina seria mas facil si usted toma el tiempo de ver otros videos los cuales muestran como cargar el carreto o "Bobbin" porfavor (ases Click en la " i " y ves los otros videos) gracias por mirar nuestros videos.
Entendí gracias. :)
Un placer alludarte amigo, Y Hos deseo un feliz y prospero año nuevo
Could you tell me what you used for your belt?
+Robert Booth I did went to my nearest Hydraulic supply and buy a large O ring, they are dirt cheap! I mean a few dimes for ten of them..
Fantastic job. Thanks for posting.
Yes I use the wrong motor, but it was the end of the day! and I just wanted to test the machine! later on I'll choose a more adequate motor! thanks for the comment!
Very soon they will be available, sorry for the delay!
Вы показали мне , как уйти от зубчатой передачи .
Hos deseo muy buena suerte amigo!!!
What happened to the downloadable plans?
Bottom of the page there is a link for your to download the plans
(mac-s-power.com/MINI-TOROIDAL-WINDER-WITH-COUNTER-FMTWV35.htm)
Good job...good luck
Thanks, you too!
Great Work - your WILL be Compensated...
thank you for your comment.
Es muy interesante este video para mi, viendo estas imagenes nos dá una idea cabal de como hacer una maquina embobinadora para toroidales.Atte. Hermógenes
+Hermógenes Condori Muchas grasias, se le desea la mejor de las fortunas en sus proyectos.
First of all rejoice in your mistakes, for that is the only way you can learn!
Спасибо
where are the downloadable plans ? Great work, btw !
Good
Thank you...
Если не сложно!? Подключите титры, для перевода на Русский.
Ok. Хотя Вы не плохо говорите по английски.
Thank you very much! I appreciate your comment!
Very inspiring !
maxi miliaan Thanks
great idea,very inspiring
thank's so mush Migueldeservantes
Legal amigo.
Grasias... bas a acer uno??
20 numbers smaller please.
Can you explain? I do not understand....
You need a "slider" for this machines.
Well, Yes you are totally correct, but for a hobby machine it is hard to make extra parts.. keeping in mind that those accessories have to be made really small and really durable... so do you have a option or example of an simple cheap and easy to made slider?
would you care to send a link or photographs of a nice slider that could be manufactured.. or at least adapted?
Great
mantap
Im from Brasil
Yes how can I help you? come le puedo ayudar??
@@Migueldeservantes you can help me whit the project
Hello friend i nerd desesperate This projecto pleaase
But what do you need, the plans so you can make your own?? or you need the parts... or you need the machine already made and assembled??? (mac-s-power.com/HOBBY-ELECTRONICS_c2.htm)
looks like iron man
★★★★★
!!! U...E.