Quick correction for 1:55: Corrosive projection will only allow you to full strip at 96.4% battery rather than 82%. This is because Gauss' armor strip only scales off his **redline** battery, rather than his entire battery. What is Redline battery? It's the top 20% of his battery that only unlocks when you activate redline (the battery is normally capped at 80%). So if your battery is 80% full, you would get no strip at all. At 90% battery, you would get 50% strip. At 96.4% battery, you would get 82% strip, which would allow you to full strip with corrosive projection. Thank you to AznvasionsPlays for pointing this out! You can see his video here: ruclips.net/video/0orZ3gl4Kv0/видео.html Due to DE logic, Kinetic Plating and Redline counts as a channeled ability which means you can proc seismic bond for an extra 30% efficiency. This gives you the option to use streamline instead of fleeting expertise, or a rank 3 fleeting expertise to hit the cap of 175% efficiency. Any companion with work but if you want one that can reliably proc seismic bond, use Diriga with Helstrum. Even if it gets patched in the future Mach Rush is a channeled ability, so seismic bond will always work. Congrats on graduating Gauss university, claim your degree here :D My Overframe guide: overframe.gg/build/592912/gauss-prime/170-200-kpm-gauss-nuke-for-all-steel-path-content/ Ninjase's furis build: overframe.gg/build/492085/furis/furis-incarnon-heat-inherit-for-levelcap-disruption/ My Bubonico primer: overframe.gg/build/594883/
It's a good guide, tho. I see ways to improve it nonetheless. Who in their right mind would use kuva ogris? What about tenet cycron? I f all heat procs get summed up by cold sunder, does it matter if they are many or large ones? If x is 10 and y is 1 , it should make no difference if x is damage or number of procs.
Dude should also switch out for archon flow, gives the exact same energy + a bonus on energy with cold kills, which is how you'll be nuking anyway. (Just more capacity hungry) Then you can get rid of the yellows and put in 4 red and have a spare slot. (I use a 50 energy increase on mine) Which at cap will bring me to about 700-800 energy. Making nuking much cheaper. Get rid of trash corrosive, wait for it to cap out and replace overextended with narrow minded, this guy is insane if he thinks range Gauss is better than duration Gauss. Plus for Gauss, you don't really need Rolling Guard unless you are going against level cap or smth. Keep that exilus rush and enjoy your nuking baby boy. I even threw umbral intensify and fiber on him, just to boost the damage and passive tank. And to top it off I'll eventually replace Redirection with Augur Accord, making for a very strong Gauss indeed. (Be warned I am not a modding expert and am in fact only a mad scientist, I cannot verify whether this build is absolute insanity or actually good, it just works really well for me.) All I know is higher shields is better for shield gating after recent updates, so yeah. Have fun folks, and remember: Don't stop modding!
As Trib once said, “If you’re dealing 5 million damage on a 50 thousand health pool, at the end of the day, ya still did 50 thousand damage.” If you deal that massive damage to a radius of enemies, then it’s best.
Thank you. From the bottom of my heart. You guys make warframe so ez for me and other vets with k's of hours. People see your videos and do all the work. I love it. I haven't needed to put in any work now that these videos exist. Keep up the great work!
What’s it with peeps thinking any good strategy is going to get nerfed? They are much worse offender frames like revenant, stynax, rhino, Octavia,…etc. I get that gauss is very good, but he’s neither stupid op nor braindead.
@@bruh7170 Octavia wont get nerfed cause no one plays her, rhino, stynax and revenant aren't nearly as powerful as someone like gauss. I don't think gauss is gonna get nerfed though cause hes been a very popular frame who has been able to do this for a while
So the way people general refer to gausses battery is that the part that fills up without redline active is “80%”. So when the video said that with corrosive projection 82% is needed to fully strip it means have redline active and have the last 20% at least 2% full.
@@PYROM4NI4CCwow what, i had always thought the part under the red line didnt count as battery or worked differently. I didnt know it was already 80% Then why does it show the % starting from 0 again when you use redline? Its so misleading and confusing
@@rivershen8954 I guess just the way DE decided to represent it. Best way I can explain it is the number you see is representative of the percent of the 20% so like seeing 50 would be the full 80% and then 10% since the last 20% is half full
@@PYROM4NI4CC yeah and i almost had a stroke reading your explanation as well. Its just unnecessary, why didnt they just show it as 80% battery, and when you use redline it starts charging up from 80% to 100% instead of 100% of the last 20% thing bullshit
Have watched a lot of gauss videos and thermal sunder, but this is the first time that I fully understand it and know how and when to use it, insane guide. thanks
Returning player here,just got gauss as my first prime the other day,thank you so much! I really like the frame I just didn’t really understand him until now thanks to you! Also that editing in the beginning was perfect I had to sub for that alone 😂
I have almost figured out this stuff over the years, but u my friend are the only person I've seen properly explain this TY! very much good sir. Doing DEs job for them.
Honestly I wanna try this build. I normally use hildryn. Blazing pillage to light them on fire, pillage for armor strip, thermal sunder for cold and explosive
@@rick30521I memeber. My saryn prime built was for level 100~ enemies in elite sim. Almost three years later, my saryn struggles doing good damage in SP. Sadge.
The best gauss mix between duration and nuking Brief respite i just use it cus this is a spamable thermal sunder build and if i were hit by electricity i can just spam it over and over till its over, cunning drift,primed continuity,streamline,equilibrium,umbrul intensify,overextended,primed flow,fleeting expertise rank 3 since you only need 170 efficiency,and stretch Arcanes: molt augmented and efficiency 4 red shards duration and one yellow casting speed You can switch out umbral intensify for any other mod if you have molt augmented maxed rank i use intensify cus i only need to get 60 kills to get 100% strength back instead of 200 this build took me to level 1k on zariman youll only have 65 seconds of his redline and kinetic plating but the lower the duration the quicker you reach 100% and the quicker you reach invincibility and full potential thermal sunder
Very informative video, I have no idea how you possibly dont have energy problems, but besides that this clears up a lot of confusion I had about consistently armor stripping enemies.
well, enemies drop energy, so if you kill 10+ enemies in a single sunder you should be positive. Just like Acceltra's ammo. Can't run out of it if you kill everything on the map in one mag
You lost me at “get over your sprint speed addiction” It’s not an addiction, I can stop whenever I want In all seriousness, great vid! Boutta try this out rn
I'm a founder, and have been around for a long fucking time...But BTW @worm6738 A user in Warframe just dipped into a survival i was doing and blew my damage out of the water. i asked about it, and he pointed me here to you. God tier move. Thumbs up and you have my support. His name is Neotheo and a bro in warframe.
My only problem with this... 1. You need his battery at 100%. 2. Battery takes too long to charge up by itself. You can also you grimoire for energy synergy
@@Rhodynit This is incorrect, higher duration makes REDLINE take longer to max out, the battery (the bar in the UI on the right) always increases/decreases by the same amount.
You can spam mach rush to build battery, each cast increases battery by 10%. The % counter that shows while redline is active is not battery, it's redline. The battery is the bar that fills up.
did not know you could dump strength and still have big damage on sunder. i havent been using it and have sunder subsumed over with roar or energized munitions whoever designed gauss is insane. Damage from sunder scales from status procs, potency of redline scales from duration, not strength
at 2:07 i'm not able to strip their armor even though i have the exact same gauss build and battery at 100% and using heat ? i dont have any of the buffs u got on the top right either what am i missing
Almost similar build with Archon Vitality. 40% str, decent duration, 160 eff & 169 range. I don’t know why but I can never reach damage cap like you did, not complaining about it either. I can kill almost anything which spawns (except for Acolytes) with Thermal Sunder priming with my Epitaph. And I think the culprit is my Cucumber arcane on Epitaph. Will have to check it out once without the arcane.
As someone who used to have a habit of crashing PS4/Switch players with Nightwatch Napalm spam via Energized Munitions (not really, I'm kidding), it feels good to have another way to play Gauss.
Thxs for the build. My favorite frame now. It's actually kinda annoying, that he is so stupidly easy after using for just 1 hour. No need to find enemies, just some claps in 30m and they go "puff". Though i never needed rolling guard, so swapped it for a bit more strength to have more dmg for Deep Archimedea (needed more than 2 heat claps) and become a bit more tanky from the beginning for sp n etc. But im not sure, why even bother with heat inherit (i mean, on 1:17 it was harder not to kill accidentally with incarnon, than to use s3 for some reason).
I'm a noob who got gauss and I wanted to know, how come did yous strip the enemy armor at only 12 or 20% red line battery? Shouldn't it be at 96 as you corrected in the comments? 2:15
The armor strip scales from the battery (the gauge), not redline %. You can be at 1% redline and still full strip as long as the gauge is filled up to at least 96.4%.
The bar that fills with time is the battery, don't look at the percentage when you use redline: basically that percentage that shows up with redline indicates how much of the last 20% of battery you have.
Thats alot of button presses to do what a 2 emerald shard revenant can to by just shooting a demolisher with incarnon angstrum in the same amount of time
Redline battery doesn't drop after reaching 100%, and to keep changing the battery you literally have to just... run, even with you legs and not with your ability.
Bro am a gauss main and i didnt know any of this.. used to run gauss only for his survival and.. his 4.. i have got a new wah go play him now thanks man
Need more details… seems like you’re trying to say proc heat heat heat x10 and then cold? And somehow it expedites the damage of the heat procs?? Or are you saying the minute u armor strip, it nukes? I tried the build and strat but it didn’t do anywhere near as much damage.. Edit: my felarx with xata’s 2-taps eximus troops so this seems like a lot of work lol
The more heat procs enemy has, the more damage u deal when casting cold thermal sunder. The first heat proc u do on enemy- u want it to be from a weapon primer that has bane mod and +heat dmg, and since the heat proc stacks infinitely, all the heat procs u do with thermal sunder will inherit the properties of the first heat proc that got applied to the enemy, so u basically apply some of the mods from ur primer to the heat damage from thermal sunder. That's how I understand it.
If Epitaph and Kuva Ogris are your preferred primers, why are you priming with Bubonico at the start of the video? Surely Bubonico's passive of +9 seconds to status duration is a great boon for heat inherit thermal sunder.
So let me get this straight, first you build up the red line meter to 100% by using the first followed by a third (heat) followed again by a first to keep the meter from draining and lastly when meter is at 100% you spam third (heat) about 4 or 5 times and then detonate with third (cold) right?
I maybe stupid or dumb, but everytime i cast heat twice then cold it just goes blast and doesnt one hit them the way yours does first time using gauss please be kind to me, did it in the simulacrum to further understand how it works, cant seem to replicate how you do it, brought it to steelpath it does its intended job properly
3:03 whoa whoa whoa, don't need to throw the shots at me (theres only one thermal rhino user and thats me) or imma make original gauss thermal gets nuked too lmaoooo
![FILMMAKER REACTS: WARFRAME | [ALL PRIME TRAILERS!!]](/img/1.gif)
Quick correction for 1:55: Corrosive projection will only allow you to full strip at 96.4% battery rather than 82%. This is because Gauss' armor strip only scales off his **redline** battery, rather than his entire battery. What is Redline battery? It's the top 20% of his battery that only unlocks when you activate redline (the battery is normally capped at 80%). So if your battery is 80% full, you would get no strip at all. At 90% battery, you would get 50% strip. At 96.4% battery, you would get 82% strip, which would allow you to full strip with corrosive projection. Thank you to AznvasionsPlays for pointing this out! You can see his video here: ruclips.net/video/0orZ3gl4Kv0/видео.html
Due to DE logic, Kinetic Plating and Redline counts as a channeled ability which means you can proc seismic bond for an extra 30% efficiency. This gives you the option to use streamline instead of fleeting expertise, or a rank 3 fleeting expertise to hit the cap of 175% efficiency. Any companion with work but if you want one that can reliably proc seismic bond, use Diriga with Helstrum. Even if it gets patched in the future Mach Rush is a channeled ability, so seismic bond will always work.
Congrats on graduating Gauss university, claim your degree here :D
My Overframe guide: overframe.gg/build/592912/gauss-prime/170-200-kpm-gauss-nuke-for-all-steel-path-content/
Ninjase's furis build: overframe.gg/build/492085/furis/furis-incarnon-heat-inherit-for-levelcap-disruption/
My Bubonico primer: overframe.gg/build/594883/
🎓👨🎓🗿🗿
It's a good guide, tho. I see ways to improve it nonetheless. Who in their right mind would use kuva ogris? What about tenet cycron? I f all heat procs get summed up by cold sunder, does it matter if they are many or large ones? If x is 10 and y is 1 , it should make no difference if x is damage or number of procs.
You damn goof ball, I spent like 3 hours trying to see why I couldn't stripbat 82% battery
Do you think this build would work with full armor strip Saryn?
Then how did you full strip in the simulacrum when your battery wasnt almost full?
> get over your sprint speed addiction.
-Day ruined.
put mobilize in exilus
@@knayvikdoes that give us sprint speed tho? I THINK NOT SO YOUR SUGGESTION IS INVALID
rush gives more than sprint boost
@@Boovel
put amalgam serration and praedos and ur fine with sprinting
Dude should also switch out for archon flow, gives the exact same energy + a bonus on energy with cold kills, which is how you'll be nuking anyway. (Just more capacity hungry) Then you can get rid of the yellows and put in 4 red and have a spare slot. (I use a 50 energy increase on mine) Which at cap will bring me to about 700-800 energy. Making nuking much cheaper.
Get rid of trash corrosive, wait for it to cap out and replace overextended with narrow minded, this guy is insane if he thinks range Gauss is better than duration Gauss.
Plus for Gauss, you don't really need Rolling Guard unless you are going against level cap or smth. Keep that exilus rush and enjoy your nuking baby boy.
I even threw umbral intensify and fiber on him, just to boost the damage and passive tank.
And to top it off I'll eventually replace Redirection with Augur Accord, making for a very strong Gauss indeed.
(Be warned I am not a modding expert and am in fact only a mad scientist, I cannot verify whether this build is absolute insanity or actually good, it just works really well for me.) All I know is higher shields is better for shield gating after recent updates, so yeah. Have fun folks, and remember: Don't stop modding!
Step 1: Get over your speed addiction
It's not an addiction, it's a need. A NEED for SPEED.
**cue NFS MW Shapeshifter**
Octane reference detected, opinion accepted.
Step 2: Fail
Need?? I AM SPEED...
kachow!
As Trib once said, “If you’re dealing 5 million damage on a 50 thousand health pool, at the end of the day, ya still did 50 thousand damage.” If you deal that massive damage to a radius of enemies, then it’s best.
W Trib reference.
Bruh ur acting like u won’t run range on it 💀
@@EnriqueHernandez-kd1tgputting all the damage modifiers takes up spaces for opportunities to make range modifiers
This doesn't require any strength on gauss, only archon vitality which just makes this go smoother@@leonardocastellanos7344
My friend who hits letters in his damage
That’s actually so smart using corrosive projection then sunder rush to strip! Kudos! Will try this out next level cap I do
Hey Nova!! caught you on here!
Omg it's Noval umbra , i have a question
Whats your favorite Warframe ....
This is a incredible guide that really helped me to understand thermal sunder and it's intricacies, thank you so much worm
Gauss University appreciates you
I never really understood Thermal Sunder's power until recently due to having taken a break from Warframe for a while. Thank you for the information!
Now I finaly understand how that damn ability works. Thanks a lot!
And no, I will not get over my sprint speed addiction.
Thank you. From the bottom of my heart. You guys make warframe so ez for me and other vets with k's of hours. People see your videos and do all the work. I love it. I haven't needed to put in any work now that these videos exist. Keep up the great work!
I really hope gauss wont get nerfed now that he will be much easier to get for everyone and all eyes are on him atm
What’s it with peeps thinking any good strategy is going to get nerfed?
They are much worse offender frames like revenant, stynax, rhino, Octavia,…etc.
I get that gauss is very good, but he’s neither stupid op nor braindead.
he is not getting nerfed lmaoooo
@@bruh7170 Octavia wont get nerfed cause no one plays her, rhino, stynax and revenant aren't nearly as powerful as someone like gauss. I don't think gauss is gonna get nerfed though cause hes been a very popular frame who has been able to do this for a while
honestly if wasn't for Excalibur, Gauss Probably would be the posterboy of Warframe, DE seems to like him a lot, so its unlikely he gets nerfed
Octavia literally just had Mallet changed because of Orange shards. @@chungo2548
I love the “GAS GAS GAS and I’m all out of gas” loadout you got there
Huge thanks for uploading i have GOT to try this it looks nuts.
Detonating the heat procs via Cold Sunder is insane
So, still working??
@@hermesaliascarreno8822 yes
Heya! amazing video! How did you full strip at 2:07 when the battery was below 20%? I thought the battery needs to be 80+ even with corrosive proj?
So the way people general refer to gausses battery is that the part that fills up without redline active is “80%”. So when the video said that with corrosive projection 82% is needed to fully strip it means have redline active and have the last 20% at least 2% full.
@@PYROM4NI4CC Ahh I see, thank you so much! 💜
@@PYROM4NI4CCwow what, i had always thought the part under the red line didnt count as battery or worked differently. I didnt know it was already 80%
Then why does it show the % starting from 0 again when you use redline? Its so misleading and confusing
@@rivershen8954 I guess just the way DE decided to represent it. Best way I can explain it is the number you see is representative of the percent of the 20% so like seeing 50 would be the full 80% and then 10% since the last 20% is half full
@@PYROM4NI4CC yeah and i almost had a stroke reading your explanation as well. Its just unnecessary, why didnt they just show it as 80% battery, and when you use redline it starts charging up from 80% to 100% instead of 100% of the last 20% thing bullshit
Have watched a lot of gauss videos and thermal sunder, but this is the first time that I fully understand it and know how and when to use it, insane guide.
thanks
Easy quick and precise, gauss has been sitting in my invent for quite some time, time to play this speedyboi. Thanks!
Dude posts the best gauss video and doesnt ask you to suscribe, or like at all, now THOSE are the guys I sub and like their videos, keep it up mate
Returning player here,just got gauss as my first prime the other day,thank you so much! I really like the frame I just didn’t really understand him until now thanks to you! Also that editing in the beginning was perfect I had to sub for that alone 😂
I have almost figured out this stuff over the years, but u my friend are the only person I've seen properly explain this TY! very much good sir. Doing DEs job for them.
Honestly I wanna try this build. I normally use hildryn. Blazing pillage to light them on fire, pillage for armor strip, thermal sunder for cold and explosive
That sounds brilliant, can you share the build and play style please?
Seems like this would work on Gauss too if you just put pillage on Gauss.
its not hard to full armor strip on gauss already though and his kit feels really great all around @@thenightingale7405
@@thenightingale7405 yeah but why using pillage on gauss ? He's already durable and his armor stripping is easier to run ?
@@megasparky2657 shield gate to upgrade from durable to invincible
Great video! Gauss always seemed pretty complicated to me but this gives me a great place to start
Thank you for making my Gauss experience into a new type of hell for the enemy
youre the first person to explain this in a way that makes sense
As a returning player:
What the fuck.
Hey, remember when the highest base level for enemies was like 30? And past 100 it was hard to deal with them?
@@rick30521I memeber. My saryn prime built was for level 100~ enemies in elite sim.
Almost three years later, my saryn struggles doing good damage in SP. Sadge.
This is exactly what happened to me, all my builds from 4 years ago are useless@@ElemXCR
@@ElemXCRlook for a 2 green shard saryn build. Im running max lvl with her atm she’s amazing
@@hann1bal197As a returning player from 2019; 5 year old octavia builds still work.
I've had no problems with warframe power creep so far lol.
The best gauss mix between duration and nuking
Brief respite i just use it cus this is a spamable thermal sunder build and if i were hit by electricity i can just spam it over and over till its over, cunning drift,primed continuity,streamline,equilibrium,umbrul intensify,overextended,primed flow,fleeting expertise rank 3 since you only need 170 efficiency,and stretch
Arcanes: molt augmented and efficiency
4 red shards duration and one yellow casting speed
You can switch out umbral intensify for any other mod if you have molt augmented maxed rank i use intensify cus i only need to get 60 kills to get 100% strength back instead of 200 this build took me to level 1k on zariman youll only have 65 seconds of his redline and kinetic plating but the lower the duration the quicker you reach 100% and the quicker you reach invincibility and full potential thermal sunder
Very informative video, I have no idea how you possibly dont have energy problems, but besides that this clears up a lot of confusion I had about consistently armor stripping enemies.
well, enemies drop energy, so if you kill 10+ enemies in a single sunder you should be positive.
Just like Acceltra's ammo. Can't run out of it if you kill everything on the map in one mag
You lost me at “get over your sprint speed addiction”
It’s not an addiction, I can stop whenever I want
In all seriousness, great vid! Boutta try this out rn
Im still here waiting for my gauss prime to finish building
Same, mines ready by Wednesday. 😂
Have fun!
@@Ixarus6713 mines on tuesday i am so excited to go mach 10 just need a volt prime friend
and I cant even start building mine because im out of nitain extract lol
Nightwave is ur friend@@lovrovro
I vigorously underestimated the sheer range of this build, that's gorgeous
I'm a founder, and have been around for a long fucking time...But BTW @worm6738 A user in Warframe just dipped into a survival i was doing and blew my damage out of the water. i asked about it, and he pointed me here to you. God tier move. Thumbs up and you have my support. His name is Neotheo and a bro in warframe.
keep making this type of content and youll grow sooo fast!
unfortunately, not running Sprint boost on gauss is also not very gauss
Speed > Damage
Wanna nuke? Use Volt :)
@novaprix8864 volts nuke has a wider range but it doesn't scale well
@@NahIdontthinksoatall My guy, you don't need 2.1 Billion damage even in SP 😂
@novaprix8864 yeah, but volts 4 doesn't kill at steel path levels due to armor
@@NahIdontthinksoatall Oh. Well that sucks. Even with Nekros armor strip?
Brilliant video, all this build needs is the MIGHTY SEER
3:25 , searching for dad and returns nothing, true gamer move
-Rushes in
-Casts the concentrated power of sun
-Runs out
i'm gonna try this for sience reaserch purposes
Results ?
This was actually a good and informative video
Bro your warframe dancing with that catchy music is so fun to watch and kinda distracting but i love it :D
As Trib once said, “If you’re dealing 5 million damage on everyone at the end of the day, ya still killed everyone”.
I'm sorry, but I'll never get over my speed addiction with Gauss, it's all or nothin lmao
Amazing video, nice job. I didn’t know any of this shit and now gauss is back to my #1 frame
As a gauss main I feel personally attacked telling me to get over my speed addiction. How dare you good sir
0:55 something about seeing satan dancing on beat to this goofy ass bgm got me snickering
Great video, amazing explanation. Good stuff.
“Khora chilling in the back with shade’s on”💀
I had assumed Kinetic Plating would more or less not work at such a low strength.
As gauss fan, quite glad to find this video, because I wanted to find some secret moment about him
0:56 now I have to test this as a subsumable. 😯 something is telling me this will be insanely busted when I run it with my heat status builds. 🤩
Idk why you are being mean but this is my favorite gauss video and build, i will sub and wish to see more from you 💜
My only problem with this... 1. You need his battery at 100%. 2. Battery takes too long to charge up by itself. You can also you grimoire for energy synergy
High duration makes your baterry take longer to Fully Charge
Just dont blindly follow those big youtuber build that never solo level cap and stack all your mod on duration.
@@Rhodynit This is incorrect, higher duration makes REDLINE take longer to max out, the battery (the bar in the UI on the right) always increases/decreases by the same amount.
You can spam mach rush to build battery, each cast increases battery by 10%. The % counter that shows while redline is active is not battery, it's redline. The battery is the bar that fills up.
@@Drischa i was talking about Over 80%, so After Redline Cast, yes my bad i didnt mentioned it, thanks for pointing out
did not know you could dump strength and still have big damage on sunder. i havent been using it and have sunder subsumed over with roar or energized munitions
whoever designed gauss is insane. Damage from sunder scales from status procs, potency of redline scales from duration, not strength
After watching this, building Gauss, and watching it again, I still dont get it. Back to the funny slam into wall build
I have the feeling that G Prime loads the battery much faster, but could also be mainly cause I forget to use 2 once it runs out
It's only slightly faster lol it doesn't make enough of a difference when pressing 1 anyway for battery
just gotta find a horde of enemies with 2 billion HP
I love the goofy background music.
Keep spreading the word, let brozime know the error in his ways of building gauss
Ikr
at 2:07 i'm not able to strip their armor even though i have the exact same gauss build and battery at 100% and using heat ? i dont have any of the buffs u got on the top right either what am i missing
Do you have max Molt Augmented. A lot of WF content creators create builds that rely on molt augmented to get them over the bar for 100% armor strip.
@@thenightingale7405that's not how gauss armor strip works
Do u have redline active
gauss can have 10% strength and still armorstrip lol
@@thenightingale7405
Crei que no hiba a funcionar está build, pero ya me doy cuenta de cómo se usa la 3 habilidad correctamente jeje
Muy buena build bro
Ik this video was a evil invention “get over your sprint speed addiction“ I can stop anytime I want
Thank you with this information I will be able to better use... Other frames once I throw Gauss into the blender now that the prime is out
I'm trying to learn, but you're so dang fast!
some really nice tips here thanks
unhinged greatness is all i have to say
Almost similar build with Archon Vitality. 40% str, decent duration, 160 eff & 169 range.
I don’t know why but I can never reach damage cap like you did, not complaining about it either. I can kill almost anything which spawns (except for Acolytes) with Thermal Sunder priming with my Epitaph. And I think the culprit is my Cucumber arcane on Epitaph. Will have to check it out once without the arcane.
As someone who used to have a habit of crashing PS4/Switch players with Nightwatch Napalm spam via Energized Munitions (not really, I'm kidding), it feels good to have another way to play Gauss.
I use archon flow over primed flow myself but tbh not sure it even helps 😅
The floodgates are open now. 🏃♂🏃♂🏃♀🏃♀🏃♂🏃♂🏃♀🏃♀
Thank you for explaining this !
I could see one possible improvement. Sacrifice Auger Reach for Mach Crash to make your prime time easier.
Thank you so much of the info brother tysm mwa
Meanwhile every Gauss Prime player I've encountered so far don't even know Thermal Sunder exists
speed
and now everyone wont stop spamming it
this vid made me a gauss player
Thxs for the build. My favorite frame now. It's actually kinda annoying, that he is so stupidly easy after using for just 1 hour. No need to find enemies, just some claps in 30m and they go "puff". Though i never needed rolling guard, so swapped it for a bit more strength to have more dmg for Deep Archimedea (needed more than 2 heat claps) and become a bit more tanky from the beginning for sp n etc.
But im not sure, why even bother with heat inherit (i mean, on 1:17 it was harder not to kill accidentally with incarnon, than to use s3 for some reason).
One day I will understand all those weird symbols near the health, since they do not look like arcanes to me
I'm a noob who got gauss and I wanted to know, how come did yous strip the enemy armor at only 12 or 20% red line battery? Shouldn't it be at 96 as you corrected in the comments? 2:15
The armor strip scales from the battery (the gauge), not redline %. You can be at 1% redline and still full strip as long as the gauge is filled up to at least 96.4%.
@@worm6738 mind telling me what the gague is?
@@amgad1340 It's the battery icon at the bottom right. You can check out Aznvasion's video I linked in my pinned comment for more details :D
@@worm6738 Alr ty
sorry i dont get it, how did TS strip armor without 82% redline @2:08 ?
The bar that fills with time is the battery, don't look at the percentage when you use redline: basically that percentage that shows up with redline indicates how much of the last 20% of battery you have.
See I understand it but my brain is like: “SPEEED”
I don’t understand how does heat sunder work it just says thermal sunder
Thats alot of button presses to do what a 2 emerald shard revenant can to by just shooting a demolisher with incarnon angstrum in the same amount of time
Redline battery doesn't drop after reaching 100%, and to keep changing the battery you literally have to just... run, even with you legs and not with your ability.
Bro am a gauss main and i didnt know any of this.. used to run gauss only for his survival and.. his 4.. i have got a new wah go play him now thanks man
"Not full strip.
They naked."💀
Need more details… seems like you’re trying to say proc heat heat heat x10 and then cold? And somehow it expedites the damage of the heat procs?? Or are you saying the minute u armor strip, it nukes? I tried the build and strat but it didn’t do anywhere near as much damage..
Edit: my felarx with xata’s 2-taps eximus troops so this seems like a lot of work lol
The more heat procs enemy has, the more damage u deal when casting cold thermal sunder.
The first heat proc u do on enemy- u want it to be from a weapon primer that has bane mod and +heat dmg, and since the heat proc stacks infinitely, all the heat procs u do with thermal sunder will inherit the properties of the first heat proc that got applied to the enemy, so u basically apply some of the mods from ur primer to the heat damage from thermal sunder.
That's how I understand it.
My Harrow still amazing, gauss is nice might give him to a friend
You lost me at getting over my sprint speed addiction
If Epitaph and Kuva Ogris are your preferred primers, why are you priming with Bubonico at the start of the video?
Surely Bubonico's passive of +9 seconds to status duration is a great boon for heat inherit thermal sunder.
not me, still laughing at the titania thermal sunder build where she litterally just flies and nukes the map
"get over your sprint speed addiction"
No.
How do you passively regenerate energy without unaliving any adds? 4:18
Zenurik probably?
Oh. my. god. I have been using gauss wrong this whole time
this video cracked me up lmfao I can now say I graduated at Gauss University
Has nobody realised that his presets for Gauss Is gas gas gas and I'm running out of gas 🫡😂
Can't imagine level capping with this to not fuck up your hands 😂
So let me get this straight, first you build up the red line meter to 100% by using the first followed by a third (heat) followed again by a first to keep the meter from draining and lastly when meter is at 100% you spam third (heat) about 4 or 5 times and then detonate with third (cold) right?
Yes, but it's better to use a primer, I usually only have to shoot a group of enemies then cast cold
Yo but your frame drippy as hell my G
Based Gauss gamer
I maybe stupid or dumb, but everytime i cast heat twice then cold it just goes blast and doesnt one hit them the way yours does first time using gauss please be kind to me, did it in the simulacrum to further understand how it works, cant seem to replicate how you do it, brought it to steelpath it does its intended job properly
did u get 100% redline ? u need 100% redline to armourstrip then and do that, if u still cant, u need a heat inherit primer
3:03 whoa whoa whoa, don't need to throw the shots at me (theres only one thermal rhino user and thats me) or imma make original gauss thermal gets nuked too lmaoooo
Wasn't roar interaction on thermal sunder nerfed recently? With thermal sunder on rhino ofc
@@Sarazan97 yea but it still doesn't stop Rhino from nuking SP with primer, as always...
Crafting his prime now. 😈
I have no clue what the entire first half is talking about