This Is A First! What Will We Do With This?
HTML-код
- Опубликовано: 11 июл 2023
- #fabrats #challengerlifts #farmlife
Today we install some serious impressive @challengerlifts7727 in the shop and also help a farmer in trouble from the spring/summer run off. Check it out! Make sure to follow along with us as we build and fabricate cool stuff!!
Check out our favorite lifts at Challenger:
www.challengerlifts.com/
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More Videos you'll love:
This Was By Far The Worst Decision We've Ever Made!
• This Was By Far The Wo...
CLOSE CALL! We Almost Burned Our Shop Down!
• CLOSE CALL! We Almost ...
Off The Edge: This Trailer Recovery Might Be Too Much For The Rat Rod Wrecker!
• Off The Edge: This Tra...
I'm Building The Oldest Off-Road Monster Bus In Existence!
• I'm Building The Oldes...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729 Авто/Мото
You know it's weird, I don't get all sentimental with RUclips channels because I don't personally know the people running them, but being subbed to this channel for years I just love seeing how much success Paul and his family have with the channel. And I love that they haven't changed one bit through it all. Thanks for the content, thanks for getting me through some tough times, and thanks for staying true to yourselves. Love the channel cant wait to see what y'all get into in the future 👍🏽❤
💯❤👍
Великолепно бро 👍
If I had to choose these guys would be the ones to hang out with especially if grandma was bringing lunch😊
Couldn’t agree more.
Seriously good content and great people. Stoked for you guys and for the future of Fab Rats
99% Tow Truck . 1% Tractor . LOL ! Nice lift's for the shop ! Thanks for sharing .
sure hope you put a pad down and mount you old lift on it for so you can have a external lift system. You never know when you will need it, and gives the boys a place to tinker on there stuff while keeping out of your way.
Those zoom boom lifts are the greatest pieces of equipment ever. When you haul steel on a 53 ft flatbed you are always grateful when they have one of these to unload you fast.......
Nice Lifts!!! Fab Rats Is Moving On Up!!! Great Job Guys You Deserve It!!! Hope You Have Many More Blessings Come Your Way!!!
Good morning everyone, my Saturday morning cartoons that I watched as a little terror has been replaced by Robby, Paul, Matt and crews every Sunday, Wednesday and Friday mornings and a big ol hot cup of black juice from H-E- double hockey sticks (yup I am up in Canada 🇨🇦)!!! Have a great day everyone!!!
13:34 into the video I’m gonna say no deal. I don’t think you can pull it out with that truck.
Of course I was incorrect. But now you would think these gentlemen would invest in a set of Yankum ropes. They had the truck sitting there. They just needed the ropes.
Thanks for making.
HEY! Good morning everybody and thumbs UP to Fab Rats! 👍🐀🐀
Always good to see a new fab rats video. Very nice job. Congratulations on your new car lifts. What w crazy recovery. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep Making. God bless.
9:33 Sounds like the “Norman Schnabernacle Choir” 😁 I stole that from Tommy Smothers when I was a kid, 54 years ago. 🤣😂😁
Congratulations on the new lifts, no doubt they will be put to good use!
Part tow truck part swather Papa Sherm would be happy to see
We should call Challenger Lifts and thank them for hooking Paul up with those lifts.
Steppin up ! Glad for the COX FAM .👍👍👍👍👍🐀🐀🐀🐀🐀🐀🐀🐀🐀🏁
We would love an update on Randall. Once a member of the crew, always a member, right? Love your channel!!
He’s family
Last thing I heard was that he is doing what he loves, taxidermy.
Not sure if he won that prize he was after though
YAY!
Lucky 7 !
forgot it was Wednesday, wasn't even watching and still got 7........weird
@@richardthomas1743 whoops, didn't notice the BIG BUTTS! So, according to MY rules, really 6
Lol😂 I guess w/BB your @6 but secretly your at 7 shhhhh😉🤫
@@JanelleVocate-Ames I just noticed that too LOL.. Say hello for me at MORR , I have to head off. Have a great day! ☀
Heck yeah Paul looks great can't wait to see the new shop done to
Great upgrade with those two new hoists.
You guys are so UP LIFTING!! (see what I did there...) Always an adventure!! Thanks for taking us along for the ride. 😂👏👏👏
You guys have been very busy. It also looks like the new shop is getting closer to being finished as well.
You guys can and will pull anything. Thanks for another good video.
Nope, telehandler & boom lift are rentals for the new lift install or the construction guy's tools for building new shop.
@@akomni-vr5gtwut?
Y'all have come a long way in the last three years. From part time videos and full time for the phone company, To this great thing you've got going now. Thanks for the enjoyment and the entertainment.
All I can say,it’s a lot easier to do things with the right big equipment,even if it wasn’t designed for it. Great job guys
The lift guy “ you knew I was coming. Why didn’t you have the shop cleaned out and ready to go?”
Thanx for sharing your experience 👍 great recovery
I really appreciate your time
Have a Great Day 👍
I have to say: Paul telehandlerd the new lifts very well! 😁😎🤟
The Wrecker is now a farm implement! Well done. They new lifts will be a great addition.
Time for the snow Chains on the Hay Cutter? New Lifts are cool!
I'm happy for the fabrats crew good equipment is nice things are looking up
Lookin at them shiny new arms on the lift makes me wonder what kind of project you have coming.
Those lifts are legit stuff man
Holy crap, that large lift, CL20 lists for around 29k. Hope you guys got them as promo and didn’t have to fork that over. I would still be using that old lift…lol
Sorry, thought it was the 20, so only about 12.5K instead of the 29k….still would be using the old one.
I like that quiet little studio voiceover at the end. Warm and friendly, like you were just sitting here in my living room with me to watch the video together, and then you stood up & said your good-byes in person. Nice.
Nice lifts. Congrats on the upgrades. Well deserved.
It's a win-win. We get to watch/visit with you to see what you are up to. YT allows you to upgrade your equipment. Don't replace the lathe you got out the junk pile.
Congrats on your new hoist, 😂it was great to see the Towtruck getting in a lil work. 👊🏻Job well done guy's. 🇺🇸 God Bless America 🇺🇸
Good morning I was impressed I wasn't sure if the tow truck could pull that heavy piece of equipment I was impressed.
I love the new lifts I am sure that will help you guys a lot
Awesome lift's! You guy's deserve the best! Love watching!
You guys have a lot of equipment. A telehandler. A boom lift and an excavator. Very nice!
I think he only owns the hoe out of the three.
I think a lot of that belongs to the guys building his shop addition.
Using that Genie lift was a bit overkill, but if it's there anyways, why not?
Congradulations on the new lifts.
Nice video!! Nothing makes you fee better than getting NEW shop equipment installed and ready to work! Those are some nice looking lifts!!
That swather rescue reminded me of Matt's recovery when the farmer's kids got their swather stuck in similar situation, so, I knew the wrecker could get it out, if the Banana got the other one out, Great quick assistance and nice to hand around to see if he could continue. Great lifts as well,
I would have enjoyed seeing a four up of Clydesdale's come along and pull that hay mower out of that bog.
Great video keep up the good work God bless from GA and stay safe
Great you have the lifts. Wish you the best with the next project.take care and be safe. God bless and keep you all ❤❤
Good things happen to good people! And you are good people. 💪👍🏼
Alan might get mad but at least you got the job done paul 👍 👏
Better check Hunter for ticks after filming in that long grass.🕷
good job everyone!
I am surprised the farmer didn’t just use a tractor to get the swather out! It is usually best to pull from the rear of the swather.
You know there ain't nothing better than a brand new lift in your shop but when you get two of them oh boy I'll bet that I'm happy for you guy by the way I love your show
Awesome looking Challenger Lifts Paul you all will have a great time with those Beasts. Matt might have to borrow the big one for the World's Biggest Off Road Wrecker 😊 Great videos hard to wait for the next one. KEEP UP THE GREAT WORK
I remember the episode where you let us know you were quitting your 9 to 5 so you could focus on the channel full time. I know a lot of RUclipsrs are apprehensive about that jump because now they’re only source of income is their content and things related to it. I knew you guys would succeed. It’s awesome to watch you reap the spoils of that risk you took.
Also love that you haven’t gone Hollywood on us and are still that humble blue collar guy. Congrats!
Ok, I just noticed you have an iPhone now. You always had an Android.
I take back the Hollywood comment. Hahaha
Long time viewer here and I just want to share that work fascinates me, I can sit and watch it for hours...
As always very entertaining !! Congratulations on the new lifts !!! Question, did Randall win that hunting trip and did he bag anything ?
That is a great question. We would love an update on Randall!
❤❤ new lifts! ❤❤❤
I grew up on a ranch cutting hay when I was 12 years old. I appreciate everything about that little clip 👌🏼
You have come a long way. Remember the dump vise? How about the junked welder you rebuilt? You mentioned you really wanted a Miller welder. You and Michelle have worked hard and you deserve the success.
Awesome video! Great Lift!
Holy Crow! That guy from Challenger has been on all my favorite RUclips channels the past few months! Paul, you are going to love that lift!
Looking good Paul. I am happy for you. You all make my day happier. God bless. ❤️🙏🙏🙏🙏👍👍👍👍🌟🌟🌟🌟❤️
Nice lifts im sure you'll put them to good use
Getting the new lifts was a nice pick me up!
Always nice when you get to update your shop and this looks like a major upgrade. Now let’s get back at it we got some projects to get done . Thanks for bringing us along .
LOOKS Really sharp.
Great video. Great job on the editing making it look like they were talking to each other on the phone.
Wish you were just down the road, I would buy the short lift for my personal garage. Its better than having just car ramps.
Good to see American companies are being used
Challenger was a big sponsor of the Wrecker games.
Congrats on the new lifts. You guys always give me pleasure watching your videos. Wish I could have gotten by to see you back in May when I was in vegas. Just ran out. Of time and couldn't make it.
Haha
I saw 1/2 second of Hunter hugging a fish.
Now I gotta watch the hour long jet ski video for sure!
👍 cool got your new Lefts in 👌
What’s funny is as I’m watching this video this morning I’m trying to figure out how I’m gonna pull my stuck swather out of the mud today. Got mine stuck last night. 1st time for everything.
Once upon a broke down day... You all saved my Dodge Dakota with glorious help and cured its bad fuel pump... All I had was a pocket knife and no idea what I would do... My truck is really sad to see one lift hoist taken apart and taken out of the shop.. ...LoL.... You all are just amazing and upgrades as such are great....
Hugs to you all !!!
Was wondering when you would be getting new Challenger Lifts.
Will you use your old ones for 2 level vehicle storage?
Above and beyond on the harvester pull. Very cool of ya!!
Yes, we all noticed you didn't have the lockers locked
So Wise , Thank You . When you pulled that swather out it reminded me of all the times I got stuck . Good job on the New lifts
☕🐢 mornin all👋
Got some new pillars! Gratz fella's you deserve em☆!! And paul that was a ton of weight😮... it just goes to show ya that tha right hook up & some hp an a lil know how can accomplishment anything " plus" it helps when you got a wrecker that's "bad to tha bone" lol😏
Thx for tha share.... ☕🐢
Maybe @yankum ropes would build a bridle set up.
I remember a month or so ago yall talking about getting the new lifts but i figured you would hv put them in the new shop but i guess u will get more for it but we shall see and i know yall are veey happy with these lifts...
Fo a minute I thought I tuned in to Sumter Wrecker. Aside from the normal stuff they seem to get some farm equipment work down there in South Carolina. Fun to watch a 50 ton go into the fields once in a while.
Very nice upgrade on those lifts.
Always something fun on the farm.
Just add another kudos through The years there were these channels are getting highfalutin fancy but yours is still down to earth and thank you for that
Paul you got all the new stuff in the shop now's the Time put your lovely wife's Jeep in there and start working on it for her you know she's had your back for many years show your appreciation by giving her her beautiful jeep lol
Awesome vid!!! Cool lifts too!!! Also side note.. I like the music added in at the 5min mark, I remember Matt used to have that song when he first started his channel, been missing that one, excellent choice Paul and editor person !!!! 👍🎵 ♥
I wished they could hv done yall a favor and painted those lifts green to match the tool boxes and stuff that would hv looked cool lol plus thats also my favorite color🤷♂️😁
Sweet love the new lifts paul
Wow, what a lift! That's a win for the shop! Til next time, take care, and we'll see you on the next...
Paul you’re so fortunate to have your family beside you everyday. Ben is one hell of a man and your brother, he loves ya so don’t ever forget that. Keep working hard it pays off in the in end
Nice install on those New Challeger Rotary lifts ,now we will see some major heavy projects be built!!!
Hope your putting a 4 post lift in the new shop. It's all I use. Alot easier than a 2 post and the suspension stays at ride height for exhaust work.
they're great for non "suspension work", over-under storage, then they're just in the way much of the time.
Nice lifts, nice when you can trust what's holding things above your head.
It's really nice to see that big ass smile on Paul's face! 💯🇺🇲✌
Drinking game: Take a shot every time Paul drives something.
I was yelling on the first two pulls ! PUT IT IN 4 WHEEL DRIVE !!!!!! Water you doing!!!! 😅
Nice New Lift’s Awesome Paul good for you 👍❤️✌️🙏🏻💪🏻
Paul I know you are so glad to have them
That's a sweet endorsement! looks like the Utah gang is getting all the same stuff.