Thanks for the great video. I am also running a 16kv genset that has 2 wire start. I have mine hooked up to a mechanical timer switch. Works well. I am going to hook up an AGS for a buddy today so was good to get a refresher! 😊
I just installed an EcoGen myself. I searched high and low for instruction on how to enable off-grid mode. Finally called General and was told I can’t do it myself. I would need to have an authorized dealer enable it.
NIce Video, Thank you! I am working on a similar system with generac. I have done this before with a onan off grid, but I am having trouble finding details on the generac communications, This helped thanks again. Looking at a model 6998, what model is yours?
Hey man ! Nice vid. Also using the same generac with GroWatt inverter to auto start. How do you enable the 2 wire start on the menu ? Looks like needs some password …
You said two sets of wires. I see those. One set has 1/4" Faston connectors and one set has 3/8" Faston connectors. You did not say which pair you were shorting. It looks like you shorted the 1/4" Faston pair, but not knowing the circuit I would like to be sure before I start shorting wires!
I can’t remember what was the true way I figured it out, that was a few years ago. You can use a meter to see if there is a difference in the contact. You want the normally open one.
Can you provide the exact Generac model? I have a 6000W Aims Inverter/Charger with built in 2-Wire start/stop Auto Gen Start. I assume this would connect directly without the need for a standalone AGS.
Hey Scott watched your video found those two wires trying to hook this generator up for friend when I short-circuit those normally open wires the generator doesn't start I've got a Generac Evolution 2.0 any suggestions
Many thanks! Been searching for hours for this info. All I need is a way of my inverter requesting juice. No auto transfer panel needed!
Also thank you for the video. I’ve searched high and low for someone to show this concept.
Thanks for the great video. I am also running a 16kv genset that has 2 wire start. I have mine hooked up to a mechanical timer switch. Works well.
I am going to hook up an AGS for a buddy today so was good to get a refresher! 😊
Do you remmeber the two wire numbers?
Whoops, you already answered this in a previous post,
Best,
Mike
I just installed an EcoGen myself. I searched high and low for instruction on how to enable off-grid mode. Finally called General and was told I can’t do it myself. I would need to have an authorized dealer enable it.
We didn’t, my uncle sent everything on the app. Then I figured it out. All it is, is normal open contact.
Are those wires 194 +12vdc and 23 transfer?
What model its? I have Honeywell 17kw this model have the same cable to start?
NIce Video, Thank you!
I am working on a similar system with generac. I have done this before with a onan off grid, but I am having trouble finding details on the generac communications, This helped thanks again. Looking at a model 6998, what model is yours?
This is a family members. It should be a 2021. We just installed it in 21.
Hey man ! Nice vid. Also using the same generac with GroWatt inverter to auto start. How do you enable the 2 wire start on the menu ? Looks like needs some password …
Not 100% sure. I didn’t set up the programming. But I can ask.
You said two sets of wires. I see those. One set has 1/4" Faston connectors and one set has 3/8" Faston connectors. You did not say which pair you were shorting. It looks like you shorted the 1/4" Faston pair, but not knowing the circuit I would like to be sure before I start shorting wires!
I can’t remember what was the true way I figured it out, that was a few years ago. You can use a meter to see if there is a difference in the contact. You want the normally open one.
Can you provide the exact Generac model? I have a 6000W Aims Inverter/Charger with built in 2-Wire start/stop Auto Gen Start. I assume this would connect directly without the need for a standalone AGS.
Generac 15kW Ecogen 7163
Hi, in what position do you put the control panel, auto, man, off?
Are you referring to the generator settings or the inverter?
@@scottssolutions3849generator
You have to enable the two wire start, it's ship disable
what model is the control board? Evolution? Evolution 2.0?
I am not sure, it’s my wife’s uncles.
Hey Scott watched your video found those two wires trying to hook this generator up for friend when I short-circuit those normally open wires the generator doesn't start I've got a Generac Evolution 2.0 any suggestions
Have you set up the generator? I believe with your app? Is the generator in the right mode?
Iron able to wire start and that didn't do anything what mode should I be in
enabled
Don’t forget there is two set of two wires. You can email at Scott.solarsolutions@gmail.com
I only have one set