Видео

The company seems super scammy because it doesn't offer prices on its website and instead requires you to request a quote. Reputable companies don't do this on standard production products

How long did the install take you to do by yourself?

You said two sets of wires. I see those. One set has 1/4" Faston connectors and one set has 3/8" Faston connectors. You did not say which pair you were shorting. It looks like you shorted the 1/4" Faston pair, but not knowing the circuit I would like to be sure before I start shorting wires!

How do you deter copper thieves, do you zip-tie the panels everywhere? I also have a rural house and I'm afraid they will cut the cables like they cut the Tesla charging cords in California.

Did you calculate the uplift forces? There's some PDF from some agency in USA with a highschool level math formula to calculate the weight of the ballast (concrete) so the wind can't pull the panels out of the ground. The corners of the array are also very vulnerable to winds and when a storm passes it's usually those tiles that fly away.

I heard it's not a good idea to pull on the panels from the top because it damages them.

I just installed an EcoGen myself. I searched high and low for instruction on how to enable off-grid mode. Finally called General and was told I can’t do it myself. I would need to have an authorized dealer enable it.

Oh hell. Those rocks are huge . . . and all worn smooth and round like from water, river, ocean etc.

How do you avoid water going inside the roof wood with those big screws? Thanks

good vid. most vids dont discuss grounding stuff

How much was that system you just installed And is it all made in China? What kind of warranty does it come with? If you the homeowner install it yourself

Is that rated for grounding wire? (It looks galvanised.) So you ground each panel to panel?

So 18 bucks a clamp and 4 needed per panel then if you have 10 panels thats .... drum roll! 720 then tax and skirting is extra...

I'm not sure what solar wholesale provides??? the panels, the ground mount system or the design and I source the materials locally? I like that system though. Looks like I'm going to eventually need a couple of those.

What license is required to DIY? And does the wholesaler assist with the permit process?

We have a 40' sea container that we will be mounting our array to with equipment installed inside. Great video - lots of fantastic information. You never said what panels you were using that I could see in the video. Interested in knowing your layout and inverters so I will check out your channel and subscribe! Thank you!

Mass do not protect you from silicates. Wearing a mask is an OSHA violation. The only thing in m95 mask is good for according to OSHA is cutting the lawn.. allergies

Can you elaborate more how you find the center of the rafters? Tapping with hammer puts you in the area but how did you ensure being centered?

I'm really interested in DIY Solar. In fact, I'm ready to pull the trigger. I've found customer service at Solar Wholesale to be non-existent. Can anyone recomend another supplier?

cool video and good job!

What model its? I have Honeywell 17kw this model have the same cable to start?

One person and a mechanical digger

Great build and innovative design.

Honestly i believe you should have elaborated more becuse for the mounts and wiring ,i understood nothing . U should have explained it little more . Because u are making video for the beginners and i dont think i will able to install it .

Are those wires 194 +12vdc and 23 transfer?

arning: Replace your shingle roof before you install solar panels, neighbors had solar panels installed two years ago, shingle roof had to be replaced this year, it cost them $11,500.00 to have the solar panels removed and installed again....

Very clean job. Going to be following your video as an example for my own install.

Thank you for sharing the video and the great details!! You gave us 10 - 4 for the first day to install the Roof rail clamps... How many panels and size / did you end up installing? What was the approx total hour count for install. Trying to see how long a first timer take..

Nice job ... It's the small details at the beginning the make the end come out right. What size panels do you have on your array? I have an EG4 Brightmount with 4-410w panels, but I'm looking to triple that ... this looks like a doable set-up.

Awsome job sir 👏

Having a dump truck back onto your lawn definitely won’t help it. 😂

Good stuff but your really need add the ground wire conductor, a ground rod alone isn’t enough to trip overcurrent devices in the event have a ground fault / short circuit the entire structure will be energized and a shock hazard

Wow.......I have 500 sq ft flat roof what do you that would cost??

Hey, I appreciate your video. I need to know how much did this cost???

All of the site keeps selling kits and required so many info. Many of us just want to by certain part to DIY not the whole system that taken apart and we need to put back the same way.

Good heavens!!!

A HUGE Thank You. I never thought of using fencing material for a ground mount. All I ever see is people welding pipe. You cannot believe how much I appreciate this video. 👏👏👏

2:10 CHEMTRAIL!!!

I’m assuming that the Micro inverter replaces the inverter you install normally right near your charge controller and your battery storage system right? How many watts can this micro inverter convert into AC to the battery? I was thinking on getting a 12k Growatt inverter. Would this micro inverter be able to match a 12k Growatt ability to convert a 9.5 to 10k charge input to a battery?

Whoops, you already answered this in a previous post, Best, Mike

NIce Video, Thank you! I am working on a similar system with generac. I have done this before with a onan off grid, but I am having trouble finding details on the generac communications, This helped thanks again. Looking at a model 6998, what model is yours?

Hey Scott watched your video found those two wires trying to hook this generator up for friend when I short-circuit those normally open wires the generator doesn't start I've got a Generac Evolution 2.0 any suggestions

Does the kit come with the grillons?

I couldn't find your email. I am in the process of getting a new property in Alexandria and was wondering if you would be able to help me install the solar panels on my home. I liked the work you did, however, I don't have all the tools you used or experience. Can you help me if I pay you for your services?

Do you remmeber the two wire numbers?

what model is the control board? Evolution? Evolution 2.0?

crazy to use microinverters now with split panels, split cells and 3 diodes per panel but a nice rail installation

Works great with the Ecoflow Delta Max portable power station

So in the state of Washington.. I have 8kw 20 panels connected to AP system microinverter inverter. The rails are grounded with #8 solid copper on roof. I have 2 parallel runs of 12-2 romex poking down from the roof top into attic. Going into EMT side of the house with LB. Transitioning in the LB with a splice into #12 thhn including ground. Down to a combiner box Does this seem right? I'm new to this

🤣🤣🤣🤣 one person but dude has full machines doing the work 🤣🤣🤣