PSA: the majority of the weight reduction here comes from switching to a AAA lithium instead of a AA alkaline battery, the whole printing process only saved another ~7 gramsm
He could have shaved another 5 grams by removing the battery holder. The top shell could be modified too to reduce even more. In general he could have removed another 7-8 grams
Man, you have the best taste for music ever. I felt like I was watching a romantic movie, not a single ad to interupt my emotion, such a gem in the modern youtube.
Holy shit, this is easily the best-looking honeycomb G305 I've ever seen. I'm a huge newbie when it comes to 3D printing, and I'm not going to be printing myself, but asking a 3D printing service to print the parts for me, so I wanted to ask: what filament/material did you use for these parts, what settings, what's the spray paint you used later on etc? I'd love for the parts I get to come out looking like yours.
I didn't use filament because I used DLP printer with UV resin. But you can print with a typical 3D printer with PLA filament.(But you have to work harder on sandpaper.) Spray paint that I used "Mr. FINISHING SURFACER 1500 Black" by Mr.Hobby. Thank you for watching my video. ;3
@@blitzlab.7597 Hmm, I might have to look into getting parts in resin, since I saw another guy who also used resin to make the battery cover for a G305, and resin seems to look a lot better than PLA. Also, thanks for the information, much appreciated!
@@blitzlab.7597 Excuse me, I have another question, and thought this would potentially be the best place. So, I got the honeycomb m1 and m2 buttons from your STL files on Thingiverse printed out, and I tried putting them on my mouse, but they don't go on at all. The tension spring mechanism right next to the mouse clicks doesn't let the mouse clicks go on, because the support bit under the mouse buttons doesn't have a hollow hole where the tension spring mechanism needs to go into. I also attached a picture of the problem I have: i.imgur.com/nm2DeTz.png How did you manage to put the mouse buttons on without having a hollow hole in that bit there? Mine just don't go on at all.
@@blitzlab.7597 Huh, I thought that might've been it, since there was no way to fit it with the tension spring in. How do the buttons feel without the tension spring? Does the tension spring affect the feel of the mouse buttons at all?
Awesome vid. I was looking for a clip on modding mine but I didn't want to get into messing with the BCB just yet ( I don't want to mess with a 50 dollar mouse) . I wanted to find a print that works well too. thanks.
I bought a $8 wireless mouse and do some weight reduction mod in it, and now i have 50g wireless mouse complete with RGB and orginal battery (lithium like in phones).
Mine comes at just 85g with the spring and AAA. So not entirely sure if wasting the cost of mice (as buying 3D printed shell is more or less 30-40$) for 7g is really worth it. But great video nonetheless.
how did you smooth it out, is that boiling water you used, 100% acetone, or boiling water with acetone droplets. Since I don't have that, can I just sand it, spray with it a tiny bit of acetone, rub it with paper, sand it more, and then spray paint it.
Hi, this is simply one of the best G305 mod I have ever seen.I'm also new to 3D printing, I'm looking forward to print this for my mouse. But how did you make the stabilizer for the honeycomb battery cover and the honeycomb left and right buttons? 안녕하세요, 이것은 제가 지금까지 본 최고의 G305 모드 중 하나입니다. 3D 인쇄가 처음인데, 마우스 용으로 인쇄 할 것을 고대하고 있습니다. 그런데 벌집 배터리 덮개와 허니 콤 왼쪽 / 오른쪽 버튼의 안정제는 어떻게 만들었습니까?
@@clmnt8379 Oh, I see what you're saying. What you said was a "stabilizer" is a "supporter." I used a program called Chitubox, but people also use Messmixer a lot.
i managed to reduce the weight of my G304 from 99g to 73g by just changing to honeycomb battery cover, AAA Batts and trimming some useless plastic inside.
While it looks cool, the weight savings does not appear to be that great. Going from a AA alkaline to a AAA lithium w/a spring gets you about 15 g in reduction, so that would walk you from 99g to 84g by itself. Going through all the time/effort to 3D print just to save another 6g seems somewhat pointless when going all in on a cell battery mod would likely be easier and result in more weight savings.
The best ending ever. was about to cry. reminded me of a classic Disney film outro. Hahah and the music fitted like a charm
hahahahahahahahahaha lol
Yeah same hehehe
PSA: the majority of the weight reduction here comes from switching to a AAA lithium instead of a AA alkaline battery, the whole printing process only saved another ~7 gramsm
Hello friend here I liked it a lot. is but program that you used to do the 3D modeling and the interest
richard alves dafuq
@@richardalves6655 wut?
He could have shaved another 5 grams by removing the battery holder. The top shell could be modified too to reduce even more. In general he could have removed another 7-8 grams
@@sterkriger2572 I'm pretty sure he could''ve trimmed down some of the PCB, reducing even more weiight
I came for info, I left with respect.
yo not just the printing but the quality of the video as well are really impressive, great job on everything!
아 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ 진짜 미친듯이 웃었어요 ㅋㅋㅋㅋㅋㅋㅋㅋ
마지막 여운은 진짜 ㅋㅋㅋㅋ 어디 청룡영화제 감독상 받으실듯ㅋㅋㅋㅋㅋㅋㅋ
Same bro same
@@Retrobloo frfr
ㅋㅋㅋㅋ 샷건 치니까 가벼워서 날아가는거 실화냐곸ㅋㅋㅋㅋㅋㅋ
실화아님ㅋ
@@Lemoon_ 실수 실목 실금 실토 실일 실월
실화임 ㅋ
은 줄
@@Lemoon_ 실화임
드립임
This video is awesome! I laughed so hard at the ending, so funny and clever 😂
Man, you have the best taste for music ever. I felt like I was watching a romantic movie, not a single ad to interupt my emotion, such a gem in the modern youtube.
탁 치니 훨훨 날아가는 앤딩은 생각도 못했닼ㅋㅋ
Very nice effort. End result? meh. Kinda wobbly. For gram fanatics, ok. For me I'll stick to standard. Loved the music.
와.ㅋㅋㅋㅋ 재즈 감성과 깨알 연출, 손재주 만렙, 장인정신 그리고 공돌지식까지... 대단하십니다 정말 매우 많이요...
g304 환공포증 에디션 ㅎㄷㄷㄷㄷㄷ
You should wear gloves when using resin, you don't want to build up an allergy. Good video and ending
거의 단편영화급 리뷰네요 바로 구독 하고 갑니다.
아..마지막 영상미 무엇..ㅋㅋㅋㅋ 재밌게 잘봤습니다 ㅎㅎ
엔딩보고 좋아요 구독박습니다 ㅋㅋㅋㅋㅋㅋㅋ 이 영상은 더 많은 사람들이 봐야햌ㅋㅋㅋㅋ
6g을 위한 처절한 몸부림인데!! 간지가!!!! 레어가!!!
영상을 찢어놓으셨다..
초경량화.. 99g->78g이라니 대단하십니다!
The best outro i've ever seen
bro the ending made me fall of my chair laughing lol
すご！カッコいい！白色だったらファイナルマウスみたいになるかも！
bro no way u changed the whole shell for 5 gr reduction. at least its shell is sturdy and well built.
Holy shit, this is easily the best-looking honeycomb G305 I've ever seen.
I'm a huge newbie when it comes to 3D printing, and I'm not going to be printing myself, but asking a 3D printing service to print the parts for me, so I wanted to ask: what filament/material did you use for these parts, what settings, what's the spray paint you used later on etc? I'd love for the parts I get to come out looking like yours.
I didn't use filament because I used DLP printer with UV resin. But you can print with a typical 3D printer with PLA filament.(But you have to work harder on sandpaper.) Spray paint that I used "Mr. FINISHING SURFACER 1500 Black" by Mr.Hobby. Thank you for watching my video. ;3
@@blitzlab.7597 Hmm, I might have to look into getting parts in resin, since I saw another guy who also used resin to make the battery cover for a G305, and resin seems to look a lot better than PLA. Also, thanks for the information, much appreciated!
@@blitzlab.7597 Excuse me, I have another question, and thought this would potentially be the best place.
So, I got the honeycomb m1 and m2 buttons from your STL files on Thingiverse printed out, and I tried putting them on my mouse, but they don't go on at all. The tension spring mechanism right next to the mouse clicks doesn't let the mouse clicks go on, because the support bit under the mouse buttons doesn't have a hollow hole where the tension spring mechanism needs to go into.
I also attached a picture of the problem I have: i.imgur.com/nm2DeTz.png
How did you manage to put the mouse buttons on without having a hollow hole in that bit there? Mine just don't go on at all.
@@Frawt Ah, I removed the tension spring to lose weight. So I didn't care about that hollow hole at all!
@@blitzlab.7597 Huh, I thought that might've been it, since there was no way to fit it with the tension spring in. How do the buttons feel without the tension spring? Does the tension spring affect the feel of the mouse buttons at all?
영상미에 반해 구독했읍니다^^
마지막 시계 이쁘다
정말 대단합니다 선생!
Nice work man
이태리 장인의 수제 마우스 ㄷㄷㄷ 시가 대충 예상해본다
저렇게 해도 gpro랑 2g밖에 차이 안 나는 걸 보니깐 gpro가 참 잘 만들어진 마우스구나 싶다
선생님.. 장인이십니다...
정말 감사합니다 선생님
i think this guy made the g305 weight 78g just so he could make that ending
Insta-subbed. Loved the vid and especially the ending! Good job!
damn brother, what a fine job
김기덕 감독의
여운의 미를 보았다.
Interesting video, I think you could remove more material from the inner shell and create indentations on the bottom for the feat.
엔딩 명작영화급
잃어버린 마우스는 돌아오지 않는다... ㅋㅋㅋㅋ
ㅈㄴ완벽한 영상
마지막 패배에 빵 터졌습니다 ㅋㅋㅋ
Hey, I'm left handed guy. Will you please do 3d model with the two side buttons on the right? Please answer.
12:20 연출 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
마지막 ㅋㅋㅋㅋㅋㅋㅋ 너무 가벼워서 날아가버린 ㅋㅋㅋ
that ending make all cry haha
바무선을 가진사람은 그저 웃습니다. (하하하)
대단하심니다
WOW! You basically made a new mouse.
Only if you put some hyper glides on
와 대단하세요
장인시네요 쿠~우독!
천재닷
Awesome vid. I was looking for a clip on modding mine but I didn't want to get into messing with the BCB just yet ( I don't want to mess with a 50 dollar mouse) . I wanted to find a print that works well too. thanks.
I guess the mouse was ultra light after all
와 엔딩 진짜 ㅋㅋㅋㅋㅋ
3D 프린터는 만능이누
I LOVE THE ENDING!
샷건시 박살 각이네 ㄷㄷ
마지막 20초를 위한 12분 20초 였다 ㅅㅂㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
와 영상 기획이 ㅆㅅㅌㅊ네요
very c cool wish i can afford that sla printer.
I bought a $8 wireless mouse and do some weight reduction mod in it, and now i have 50g wireless mouse complete with RGB and orginal battery (lithium like in phones).
Mine comes at just 85g with the spring and AAA. So not entirely sure if wasting the cost of mice (as buying 3D printed shell is more or less 30-40$) for 7g is really worth it. But great video nonetheless.
how did you smooth it out, is that boiling water you used, 100% acetone, or boiling water with acetone droplets. Since I don't have that, can I just sand it, spray with it a tiny bit of acetone, rub it with paper, sand it more, and then spray paint it.
존나 잘보고 있는데 엔딩 시발 존나쳐웃었네 ㅋㅋㅋㅋ
???:내가 왜 이런 걸 보고있지?
Will this make me good in Call of Duity?
저 서페이서만 써도 문제 없나요? 전체적으로.
I never like anything and i think this is my first ever comment, this video was awesome.
구독 좋아요 눌렀습니다! 혹시 g102 제품에 오울아이 센서를 넣는 방법이 있을까요..센서 변경 한번 해보고싶네요!... 오울아이센서에 g102 마우스의 모양... g304 g pro hero g102 생긴건 똑같지만..
프로그램 뭐 쓰셨나요?
how is he making the replica on 3D version?
Hi, this is simply one of the best G305 mod I have ever seen.I'm also new to 3D printing, I'm looking forward to print this for my mouse. But how did you make the stabilizer for the honeycomb battery cover and the honeycomb left and right buttons?
안녕하세요, 이것은 제가 지금까지 본 최고의 G305 모드 중 하나입니다.
3D 인쇄가 처음인데, 마우스 용으로 인쇄 할 것을 고대하고 있습니다. 그런데 벌집 배터리 덮개와 허니 콤 왼쪽 / 오른쪽 버튼의 안정제는 어떻게 만들었습니까?
I'm sorry, but I don't know what you mean by "stabilizer"
@@blitzlab.7597 imgur.com/a/WD0TOXz
the thing that you were cutting off at 2:26
@@clmnt8379 Oh, I see what you're saying. What you said was a "stabilizer" is a "supporter." I used a program called Chitubox, but people also use Messmixer a lot.
@@blitzlab.7597 Thanks.
책상을 '탁' 치니 '얽' 하고 날라갔습니다
Can I use normal AA batteries rather than doing what he did?
Impressive job dude
Where i can buy this cover mouse g305 ?
what did you use to design the m1/2 buttons? im very interested
What monitor are you using?
i managed to reduce the weight of my G304 from 99g to 73g by just changing to honeycomb battery cover, AAA Batts and trimming some useless plastic inside.
Hey brother that video is good can you please make one Logitech g pro to be ultra light please
what is the bubble wrap around battery for?
So how much it cost in the end? Gpw cost 100 eur in europe
대단하십니다 의뢰하고 싶은 정도네요 ㅋㅋ
Thank you
Video score 10/10
모델링 하실때 사용하신 프로그램이 뭔지 궁금합니다
you are the best lol
good job man
뭐지 은근 톰과 제리느낌 나는거 나뿐인가
what grit sandpaper are you using?
How long it took to print with resin printer?
That ending was epic
손땀안차겠누
good work, nice mouse 😂😂
아니... 이렇게까지 하시는이유가 있으실거아니예요...
안녕하세요, 어떤 재료로 칠해 졌나요?
While it looks cool, the weight savings does not appear to be that great. Going from a AA alkaline to a AAA lithium w/a spring gets you about 15 g in reduction, so that would walk you from 99g to 84g by itself. Going through all the time/effort to 3D print just to save another 6g seems somewhat pointless when going all in on a cell battery mod would likely be easier and result in more weight savings.
i’m your 667th subscriber
혹시 주문제작도 하시나요?
Anyone have the American link to a tool set like his that’s magnetic looks super cool
Can u make it for also rival3 wireless