Tzr 250 3ma finished Barry sheene Akai project with JL Exhausts, nice sound!
HTML-код
- Опубликовано: 19 авг 2023
- Tzr 250 3ma finished Barry sheene Akai project with JL Exhausts, nice sound! Following on from the Tzr 250 3ma story i bring you a new video showing off the new paint work and include some low speed passes. Also included in the video is some wonderful sounds from those JL exhausts. Credit to the Mrs for her first time on the camera and to Mick Abbey for helping me jet the carbs using his dyno.
Авто/Мото
Brings back the memories, beautiful 2 strokes !
Lovely job on the bike !
Yes they are fantastic, when they hit that power band your off lol. Thank you 🙂👍🏍💨💨💨💨
Proper nice bike man
Thank you. Your comment is very much appreciated 👊👍
Very cool bike 🏍 😎
Thank you 🏍💨💨💨
That is a quick bike love the two stroke sounds like my Rd
Thank you Justin 👍
Lovely to hear . I have the j lomas pipes too . Nice tribute Sheen rep paint job . Thanks for sharing .
Thank you. I'm doing another one in the white colours. Feel free to follow 👍
What a sound ! Great bike 👍
Thank you Paul 🙂. It was a bit windy up there mind but still I think we got some O.K content lol 🙂🏍💨💨👍
@@Supercarlsunday certainly did keep up the good work !
Thank you. Definitely will do 😉👍🏍💨💨
Living the dream 😉
Camera work was great----that bike is damn quick!!!!
Thank you. I appreciate your kind Words 🙏 🏍💨💨
That’s nice ! Gave me anxiety watching you unload her from the right side I’m a left man lol.
Thank you. Its always best not to over think things 🙂👍
Sounds amazing
Thank you.👍
@@Supercarlsundayreally well done colour scheme aswel
@davejohnson3474 Thank you. Yes I love it. Gets attention everywhere I go. I'm doing another in the white akai colours for a customer. Have to get cracked on with it to get the videos on.
@@Supercarlsunday a mint tzr and an rd350 were behind me earlier riding back from boxhill to epsom they sounded and smelt great.
Look forward to the vid 🤙
@@davejohnson3474 Haha, Briliant. It will be like when me and my brother-in-law go out, good fun 😁👍
Fantastic video well done this is bringing me back to my youth, that 2 stroke sound superb, can I please ask what is the title /end music ?
Thank you. I'm building another one as we speak. If you subscribe and hit the bell you will get updates on the build. Regarding the music, unfortunately i have no idea. It is one I downloaded. I should include the titles really. I have to pay to use them
Lovit👍👍👍
Thank you! Appreciate your comment 👍
That is the reverse cylinder parallel twin before they switched to a v twin? It sounds amazing btw
Thats correct. And thanks. The v twin is the 3xv model, then there is the 1kt, thats parrallel twin conventional. There are many other variants inc sp.
@@Supercarlsunday the most powerful thing I've ridden was my RD125 LC II, fully rebuilt engine and gearbox and a micron spannie, a K&N air filter, uprated reed valves and a Dyno jet kit but that was too fast for me with my disabilities so I gave up riding before one of my many falls would seriously harm me
Sounds like it was a nice little bike. Small two strokes are fun. You got to have as much fun as you can, while you can 🙂👊👍
Jetting needs looking at for sure
The jetting is absolutely bang on!
@@Supercarlsunday its loading up hideously when you slow down you can here you trying clear it out when your doing that strange thing going in circles near your van 🤷♀️
Going in circles so people can see the bike! The bike is jetted perfect. Its been on the rolling road at Mick Abbeys, if you know who he is? I will give you a bit of information on the 250 3ma as its obvious you don't know much about the bike. They like to be thrashed. They don't like low revs and come alive at around 7-8000rpm where they like to be. If the jetting where any leaner on full chat I would be having a very bad day. Its just what there like.
@@Supercarlsunday sorry probably came across as being negative, yep had a few 3ma’s absolutely understand there fragile nature at the top when there running clean off the bottom but its always a compromise. Yours sounds fantastic on the throttle i would personally prefer a little leaner pilot and possibly needle clip position to help it not to load so much but thats all personal preference. What did mains did you end up with in the end ? Pipes sound mega by the way
You have kind of answered your own question there... Any leaner and I'm not going to feel confident on full throttle. Understanding how fragile they are you should understand how we came to these settings and decided to leave it there. The bike performs well and doesn't want to be any leaner as mentioned. People get carried away, I'm not racing the bike... Not every 3ma is the same when it comes to jetting, what works well for one can be totally different for another. I've spent time in the groups discussing this subject with many 3ma owners. I'm happy with where mine is at. Those JL pipes do sound well full chat, thank you 👌👍
Hi what was your jets sizes and needle position ?
Hi, I will do a video on this subject. If you have subscribed and hit the bell you will get a notification when I upload the video. Thanks for your question and I hope you enjoyed the video 👍
Where did you film this?
A private location! I hope you enjoyed the video. Thanks for watching 👍🏍💨💨💨
89年式。こんなカラー日本には無い。自家塗装?AKAIのカッティングが気になる。
Hi, I wish I could understand but unfortunately I can't translate to English.