hi.. i have a problme to print the 3d parts of this buil... i use the artillery genius but i can't prin wit tpu... the parts are to fine and soft.. do you have any suggestion to print?
loved watching this build. newbie question: what would be the best radio based on the pieces and parts that you used, or the one you would recommend, thx!
Thanks a lot for sharing this. I want to print 3d parts myself. We do have local 3D printing houses but they ask me to choose technology and material which I'm not very sure about. Can you please post more details about what parts you printed from the list and what process and material
@@WhirlyBlokethanks, let me help you with the list and material I'm thinking of, please confirm if those are correct parts squirt2duct_sls1 squirt2_microcammount squirt_smatail propcutter_big_uni Hero camera mount I'll decide later once I've working build. I've not invested in the camera yet :) Material to use PLA and technology FDM
AWESOME VIDEO and very helpful to someone like myself looking to build my first drone. My main QUESTION for you is I am actually looking at building the "nutmeg" versus the "squirt"....will I be able to utilize the same parts used here in your video because from what I understand it is the same as the squirt just a bit smaller or will they no be compatible due to the smaller scale? Thanks and keep up the great videos!
@@WhirlyBloke Hey thanks for the fast response!! So is there any parts that would differ....im assuming I could use mostly everything except for maybe the props just because their size?
Hey do you have any tips on printing the ducts cleanly? I feel like mine are alot more flexible than they should be... What brand of TPU filament did you use?
I recommend Filamentum Flexfill 98A. fillamentum.com/collections/flexfill-tpu-flexible-filament It's 98 shore hardness and prints fine at 220C 25mm/s The thin walls can be a problem if you use something softer like SainSmart.
Hi there! I love the video. Couple questions as a newbie. Is this build possible without the guards you 3D printed? Also, when you purchase this drown does it come with the receiver, flight controller, motors, and everything you need? Or is that all separate? And last, can you maybe recommend a legit fast FPV fast drone that has auto stabilize and a receiver that has joysticks that go back to neutral when not being used?
Hey, great video. One quick question i can’t find anywhere... what is the mini HD Cinewhoop you show at the beginning of the video? Could you leave me a name? Thank you
I get an average just over 5 minutes on a 4s 1000mah. Though i dont recommend those 6 blade props. Too much propwash, and flight time gets decreased. You also get noisier gyro readings and hotter motors.
Great video - very helpful thanks - looking to buy one of these. BTW did you know your large SUBSCRIBE splash sign behind you says "SUBCRIBE" ? LOL - Cheers ;)
@@WhirlyBloke Ooh sorry - I did scroll down a fair way to see if there were any other comments referring to it but didn't notice any.. No matter, shows people are looking carefully ;)
Very nice setup. Very helpful build video. I will be saving up for a squirt build. For now putting ducts on my Acrobrat, see how that goes. Thanks
Nice Dave now i want one!!!
Wotcha. I'm on a cinewhoop fix at the moment and this one rocks.
Great build!
Thanks. It's a great quad!
Awesome review and build...TFS
hi.. i have a problme to print the 3d parts of this buil... i use the artillery genius but i can't prin wit tpu... the parts are to fine and soft.. do you have any suggestion to print?
loved watching this build. newbie question: what would be the best radio based on the pieces and parts that you used, or the one you would recommend, thx!
Thanks. I'd got for a Radiomaster TX16s or a TX12 if you're on a budget.
Subbed for the intro... all else is just cherries on cakes lol Great video man :)
Thanks a lot for sharing this. I want to print 3d parts myself. We do have local 3D printing houses but they ask me to choose technology and material which I'm not very sure about. Can you please post more details about what parts you printed from the list and what process and material
Good idea
@@WhirlyBlokethanks, let me help you with the list and material I'm thinking of, please confirm if those are correct parts
squirt2duct_sls1
squirt2_microcammount
squirt_smatail
propcutter_big_uni
Hero camera mount I'll decide later once I've working build. I've not invested in the camera yet :)
Material to use PLA and technology FDM
My frame has 3 square holes, yours only one? I bought it as the v2 ...
How did you print your tpu so frickin well? Wow
My printers are pretty well dialled in.
cool video new friend over here😍
Weee, i wait for part 2 🇩🇰
Part 2 has been a long time coming, but it's on its way.
well done, thx! possible to install a 30x30 stack? 🙏
Yep no problem. There's plenty of room. I've even squeezed a Matek F722-SE in there with dual camera control so I build a cheater cinewhoop.
AWESOME VIDEO and very helpful to someone like myself looking to build my first drone. My main QUESTION for you is I am actually looking at building the "nutmeg" versus the "squirt"....will I be able to utilize the same parts used here in your video because from what I understand it is the same as the squirt just a bit smaller or will they no be compatible due to the smaller scale? Thanks and keep up the great videos!
You can use the same flight stack and motors to build a Nutmeg.
@@WhirlyBloke Hey thanks for the fast response!! So is there any parts that would differ....im assuming I could use mostly everything except for maybe the props just because their size?
Whats the auw?
Hey do you have any tips on printing the ducts cleanly? I feel like mine are alot more flexible than they should be... What brand of TPU filament did you use?
I recommend Filamentum Flexfill 98A. fillamentum.com/collections/flexfill-tpu-flexible-filament It's 98 shore hardness and prints fine at 220C 25mm/s The thin walls can be a problem if you use something softer like SainSmart.
How did those props work? Shen recommends hq 4x4.3x3. Wanted to know if there was a big difference.
I bit quieter and less vibration. There's not much in it really.
What props are you using??
Very Nice video! I don't have 3D printer. Will you sell me the 3D printed parts so I can start my build as well?
Are you able to upload your prop cutter to thingiverse?? I’m a noob and can’t convert any of you files to stl to print
Thanks Mate
Can 1406 motors be used on this quad?
Should be no problem.
@@WhirlyBloke TY.
Hi there! I love the video. Couple questions as a newbie. Is this build possible without the guards you 3D printed? Also, when you purchase this drown does it come with the receiver, flight controller, motors, and everything you need? Or is that all separate? And last, can you maybe recommend a legit fast FPV fast drone that has auto stabilize and a receiver that has joysticks that go back to neutral when not being used?
You're gonna have to built it all yourself or get someone to do it for you. Thanks for watching.
Hey, great video. One quick question i can’t find anywhere... what is the mini HD Cinewhoop you show at the beginning of the video? Could you leave me a name? Thank you
It's one of these ruclips.net/video/ZxQLmZu0F_Y/видео.html Nice little HD cinewhoop.
Great video I sub to you 👍
How about the flightime of rhis quad?
for real no one
posting flight time.
I get an average just over 5 minutes on a 4s 1000mah. Though i dont recommend those 6 blade props. Too much propwash, and flight time gets decreased. You also get noisier gyro readings and hotter motors.
Great video - very helpful thanks - looking to buy one of these. BTW did you know your large SUBSCRIBE splash sign behind you says "SUBCRIBE" ? LOL - Cheers ;)
I know. You're the 3rd person to spot it, but there no prize. 😀 Thanks for watching.
@@WhirlyBloke Ooh sorry - I did scroll down a fair way to see if there were any other comments referring to it but didn't notice any.. No matter, shows people are looking carefully ;)
@@cyclic2696 It's on other videos.
Looks awesome. What brand and color TPU is that?
Extrudr comes in hard, medium and semi-soft and various neon colours. www.extrudr.com/en/products/catalogue/tpu-medium-neongrun_2244/
SUBCRIBE !
hi, where is part 2?? already been 2month waiting .. thanks
A monster Whoop??
Oh yes. More to come on this one.
Subscribe spelling in the back... :?
what is SUBCRIBE??? LOL
Is an observation test. Well done you passed. 😏
@@WhirlyBloke 😅😅