Toyota 4 runner washer bottle relocation "AQUA TANK" RAGO FABRICATION
HTML-код
- Опубликовано: 15 окт 2024
- The Aqua Tank is a full washer fluid reservoir replacement that mounts snugly behind the grill of your 4runner - Made out of 100% aluminum and tig welded for years of service. This system uses factory pumps and connections that have been sealed and pressure tested for optimum use. This product also features a Billet Aluminum threaded cap, fabricated right here in the USA. The install is extremely simple, and takes about 10 minutes start to finish.
The Aqua Tank was designed to solve a common problem amongst Toyota 4 Runner owners. After upgrading your tires and bumper, your plastic factory washer fluid tank is now exposed and prone to damage on the trails - not to mention it doesn't allow for optimum tire clearance when stuffing those big 35in tires under the fender.
Disclaimer: Not all bumpers and situations are the same. Slight bending of the power steering cooler line might be necessary but not in all cases. Due to different applications some modifications might be necessary to aftermarket add ons beyond our control.
www.ragofabric...
www.ragofabric...
Find center is easy: Duck tape a "FLAT HEAD TACK" to the cap of the Aqua Tank & then place the cover down where it is perfectly aligned then press down on the area of the tack. Now you have a mark to drill from. Then from bottom, use the Hole Saw & you will now have center.
I want this because I have the metaltech fortress installed which leaves the bottom of WWR showing. I want it gone will this work??
Hi Richie,
Did you end up getting one of these? How did it fit with your bumper, etc?
Cheers
Mike
Put a thumb tack on the lid and press down on the plastic cover. Your tack hole will mark center.
I did not see your post, but you thought of this first and they did not see it. Bravo
They forgot to mention that you have to remove air deflector
Reminds me of the fancy oil catch cans that are for the wow factor.
Will that fit with a magnuson supercharger kit
Will it fit with a Magnuson supercharger? And how much fluid does it hold compared to the OEM?
My OWM tank has 3 holes with the 3rd one being something that looks like a level sensor?
What do I do?
Kick ass mod....wish you guys had this 2 years ago before i bought the expedition one relocation kit...which is absolute ass...looks like im going to need this!!!
why is the expedition one kit "ass"?
@@chrisfuckinfowler The fact that you have to relocate the air compressor or whatever it is sucked. takes a good portion of real estate that can be used for other mod. maybe ass is a bit harsh but this one from rago looks much better.
Is this compatible with your hidden behind the bumper LED bar mounts?
ITS ISNT. COMPATIBLE. 😥
does winch get in the way of installing this?
I hope someone answers this
Why do this mod? What’s the purpose?
the 4runner wiper fluid res hangs super low in front of passenger tire...so if you do a viper cut or get high clearance bumper you can see the reservoir hanging. this mod brings its up high.
Ahh. Got it.
For me, running 35s, the washer take was in the way so I deleted it.
I’m hoping that I will be able to use this and have a washer tank again.
@@4points4x46 Hey if your still in the market for a washer tank check out expedition one. They have one for the fj/4runner, it relocates the tank behind the passenger side headlight
I did check out Expedition One, I didn’t buy it was not compatible with my air compressor mount. So it wasn’t an option.
I did get the Aqua Tank and the only issue I had was the it didn’t clear my full size bumper. I had to make a right angle bracket that allowed me to rotate the tank 90 degrees counter clockwise. Then I had to get longer tank hoses and extend the control wires. It was more work but I like the results. I just wish Rago would consider full size bumpers in the design to make the mounting easier. It’s a solid product if you can fit it!
Mines otw
10 Minute install????...LOL