How I made the THOCKIEST KBD67 Lite ever
HTML-код
- Опубликовано: 10 фев 2025
- PREORDER THE COLEY SWITCHES: www.keebfront....
thonk thonk thonk
This is such an awesome board. I love my kbd67lite. What would you do to get the deepest config possible?
JOIN THE DISCORD!!
/ discord
Like my coiled cable? I'm now an affiliate with CableMod! Check out the link below:
store.cablemod...
SPECS OF THIS BOARD!
MODS - WATCH THIS VIDEO FOR AN IN-DEPTH TUTORIAL! • Testing EVERY Mod on t...
No mute silicone gasket layer - replaced with d65 gaskets stuck to the plate and cut to size.
PE PCB foam mod.
Durock v2 stabilizers, Holee Modded and lubed.
Noico sound dampener in the bottom half of the case, along with the kbdfans pcb foam they included in the kit.
-Tempest Tape Mod
SWITCHES:
-Gateron CJ's lubed with Krytox 205g0, purchased through MinoKeys
KEYCAPS:
Retro SA Keycaps i bought on aliexpress a long time ago. these are the same thing basically: kbdfans.com/pr...
Love you all. thanks so much for 1k.
#keyboard #customkeyboard #kbd67lite
A little known trick ive been testing lately for max thockiness is to take my keys out and then deep fry the casings before reinstating them with an additional 2 hour exorcism of any clacky demons inhabiting the board. keep making rad vids dude!!
Great tip. Thanks for sharing
Thanks :)
But - did you have it blessed by a shamen with holy water collected from the top of mt everest?
@@UpgradeKeyboards nah just OJ's beautiful manly tears of innocence and joy.
def a dude
No clue how you have so little subs. Your quality is unmatched by much of the popular community. I hope that you continue making these videos as they are invaluable to newcomers of the hobby. Please continue making these videos, I will do everything I can to point people in your direction.
That means so much Remi. Thank you!!
@@coleydotmp4 Please see my comment! I have a thockier switch I think you should try. Milky top Cthulhu. Milky top, Ink/oil king/bobagum bottom, and Long pole stem (ideally tecsee carrot, zaku, or husky). Hopefully you very lightly lube the bottom of the pole. Yeah.
Too deep? Never. We need to go deeper!
Great mods though, I absolutely love the sound of this board. Congratulations on the 1k milestone!
You deserve way more than 10.000 subs... yes: not more than 1.000, but way more than 10.000. Keep up with your work, it is really high quality and enjoyable.
I think you meant 10,000 not 10.000
Where’d your commas go😂😂😂
@@blayses3116 some countries swap them around
Hello, sound engineer here. From personal experience i would say that for the most deep sounding keyboard or "thock" i would recommend using a wooden case. Because wood resonates on low frequencies (exactly about 1.1 Hz.) For comparison the resonant frequency of plastic is about 9.225 Hz, and brass/metal resonates at a high frecuency of 100-150 Hz which is why brass plate keyboards are high pitched or "clacky".
Got this in my RUclips recs and honestly so pleased. Great video, great sounding board and I love the little animations. Looking forward to the next vid!
Glad you like it! Thanks so much for joining the crew :)
this channel is entertaining and soooo underrated
no way, quality videos and quality info... you need more exposure. definitely subbed and gonna join your discord.
Thank you sabrina! always appreciate fellow ladies joining the community. Ping me whenever! :)
I lubed my Gateron Blacks the way you said to lube the CJs here and I got the best sounding thocks. I’m so happy! thank you!!! 💕
This hit deep in my thocc soul. Awesome build!
Today i could not find any other better keyboard you tuber, you just earned a sub
This actually sounds sooo goood
Since i wasnt in the comunity for a while now i legit thought this was another popular channel on the level of hipyo or glarses. My mind was blown at the outro when i saw the sub count. No shot you dont blow up if you keep this up.
you're awesome, thanks for existing
Thank you for the kind comment, made my day Ani
congrats on 1k! can't wait till you're big so i can brag about how ive been subbed since >1k haha
I will work my ass off just so you can flex that!!
This is so informative! Thank you for sharing. I'm not exactly a beginner in the community but I've learned a lot from you; doing the same on my kbd67 lite on its way to me :)
Sounds fantastic :) i have a longer video about modding the 67 lite that you should check out! it's a bit old but i think there's still a lot of great info in there.
Another banger video! Onwards and Upwards!
Congrats on 1k, loved the video!
u are actually super underrated.
the most underrated keyboard youtuber???
me:yes 100%
Always Love With ur Video, Wich always
Talk about How to get more in KBD67 lite with Unusual Content.. Keep going You deserve more... #especially your voice over makes comfort for anyone who listens, Sorry If My English Is Mess
Thank you for the compliments!!
This is my first video from you and absolutely fantastic! Coincidentally I ordered some CJs just yesterday, so this comes at a perfect time. :p keel up the work, and I look forward to seeing your channel blow up!
Your voice is so cute 🥰 love the video also, definitely gonna do these mods to mine.
bros so good at art like wtf
the character is just so cute tho
your videos never miss
Congrats on 1k!!!!!!!!!!!!!
congrats on 1k :D
Awesome vid! Much deep very thocc
here before you get hugeeeee. great quality video
I don't know if i'm more shocked by the T H O C K I N E S S of the keyboard or by the quality of your videos, new sub. Excited to see what's coming next.
Just got a Keychron V1 with Boba U4T switches and the same SA profile keycap set you have here, that I also got for my first build a while back! I almost think it sounds slightly too deep, which is why I'm going to tape mod it to potentially brighten the sound just a tad.
Did u lube the switches
@@eric_c777 I lubed them, but only by using a syringe and squirting a little into each switch without deconstruction. It didn't make the most significant difference, but after the tape mod I'm very happy with how they've performed.
@@Michael-Hammerschmidtok thanks sorry for late reply
1k!!! I can now proudly say i was here
Wow great video, love it
Omg sounds so good
That sounds so good!
zamn! Coley, thats awesome, massive difference from ur other kbd67 lite r3
for sure!
God damn that's THOCCCCC
oh man I lube the top housing to reduce top out sound too, even with u4ts 😀 glad too know I'm not the only one do that 😂
you're hella underrated
Thank you Superbaby
Love this vid btw!
Epic build! I'm just waiting for my Wind x65 to arrive now :) Gonna build the ultimate endgame clack.
in the near future, i'll be proud to say that i've been here since 1.37k subs
Happy to have ya :)
That is DEEP
JEEZ is that awesome
@2:46 I laughed a lot more than I should
Some boards sound like raindrops, but this one sounds like a storm.
thats the coolest thing anyone has ever said about a keyboard
I am the baby in this video and I’m offended.
CRY ABOUT IT! jk love u
HOLY MOTHER OF THOCK
There's these thick sa-p pbt keycaps from pimpmykeyboard for additional depth, since sa keycaps seem to usually be made of abs to prevent warping.
is dat akko Lavenders i see?! Sound test soon??
this makes me want to buy a kbd67 and do these mods
HYPED!
im so hyped
no you arent (destroyed)
oh gues im not time to unsub
Sooooo goooood
I wonder how it will sound with Boba U4Ts, are you planning on making a soundtest with them soon??
Thats a great suggestion! I should.
Gotta post the full specs! Too fast for my eyes to keep up! Congrats on 1K #ColeyGangB4_1K
Just put them in the description, hope that helps :) ty for being a real one Optimal
can you do a Ciy gas67 review. Id love it.
I love this. I might copy it not gonna lie. Maybe with momoka v3s. But please, PLEASE, do a topre build.
for the thock
Can you make a video about lubeing the cj pom?
Hey Coley, when you lubed the CJs, did you only lube the top housing? Or did you lube the rest of the switch and just left the stem alone.
Personally, i lubed the entire stem. But it took away like 2% of the smoothness(not a lot but noticable), so make sure you test a few different methods of lubing on 2-4 CJ's and see what you like best! You will probably only need to do the top housing to fix the upstroke clack, but you might also want to lube/bag lube the springs! Hope that helps.
@@coleydotmp4 Definitely! I got some CJs coming on Thursday, hyped.
Beautiful!
Question: where does "pop" exist on the holy spectrum of keeb sounds? Thank you for the well-written video btw :)
Pop more has to do with tone than pitch! Hard to describe... i guess you just know it when you hear it.
DAmmm thats thockieeeee
Can u do a full review with every info of the crystal iceberg ( i want to k now if there is a interference with cherry profile and north facing led)
i have a full review of the crystal icebergs on my channel actually! haha. does that help? The only issue youll have with interference is if you have a north facing PCB. The switch wouldnt affect that
@@coleydotmp4 so there is interference? English isn't my first language so I don't really get everything
@@Sol1dYT for no interference, the PCB needs to be South-Facing, NOT north facing.
Lubing cj’s doesn’t ruin smoothness at all. Polishing is a process that makes the stem fit smoother and reduces friction into the bottom housing by wearing it in. Lube also reduces friction. I’ve compared unlubed to my lubed cj’s and they feel exactly the same. Still buttery smooth. Only difference is that the plasticy sound of the upstroke (I found unbearable) was toned down a bit.
Nice vid
Can you make a video on how to replace the silicone please.
I would put in boba linear THOCCCS, just for some extra, THOCCCCCCC
Yo u need more subs
If you want it deeper, you can also buy a fr4 plate lol. It makes really deep.
Can you please do a short or vid about ur kbd67lite with he sa keycap compared to your thin keycap
now I need taht cap
Godly thock. Do you happen to remember the thickness of the noico you used? trying to use a different sound dampener cause I can't buy noico where I am but I don't know what thickness to use. Great video!
Nice video✅✅✅
Can we name the right handed pinky? He stiff af and not being usefull at all (like a good ol 14y old teenage boy?), gotta love it :D
XD Shhhhhhh dont draw attention to him
really though i'm trying to learn to perfectly touch type but that left pinky is holding me back haha
This has nothing to do with this video but what are your thoughts on the GMMK pro.Some people say it is good and some say it is not. By the way amazing build. Also congrats on 1k you make amazing videos.
people say it's bad because it's too stiff for a gasket mounted kb and problematic clearance for stabs., better get a keychron q1 knob version or mod 007 if u dont mind the north facing leds
Thanks frosty! Tbh - i would wait for reviews of their next keyboard to come out (Glorious has hinted that there's a V2 coming) if you are set in buying from Glorious. Problems with the GMMK Pro seemed to be quality control leading to things like the stabilizers not working due to being compressed by the plate, poor stock stabs, lack of flex even though it's a gasket mount, and overall a difficult build experience due to the complexity, despite being a "beginner" board. So I'd be cautious there, and opt for an Akko Mod007 or Keychron Q1 knob. Most of the people saying the GMMK pro is a great board, are not really enthusiasts, or it's their first foray into customs. Basically, all of the reviewers I trust didnt like it. There's also the Feker 75! and a TON of great 65% budget options.
@@coleydotmp4 thank you I looked and will be getting the Mod007 space grey. Hope you get to 10k by the end of the year
The oilking are basically the cj but like more thocc if someone is interested
Yep! I agree. Oil kings are fantastic, i would've gotten them if i knew about them at the time of buying CJ's.
Sounds exactly like my kbd67 lite with mt3 keycaps heavy modding and dino keys mint linears
u are epic
Can you make a modding tutorial for id80 please I’m a beginner and getting it with Akko can radiant red
thock
Also, can you review the mod 007 and corsa switches by bolsa supply?
Maybe. there are already a ton of good reviews on the Mod007, i definitely endorse it. But those switches are interesting. any reason you want me to review them?
Could you please make tutorial on how to turn CJ’s from clack to thock
Haha i think i go over it pretty well in the video! You could lube them carefully with 205g0 and also make sure to hit the top housing like i show in the vid. No need to film. Make sure to put them in a thocky build and you should have a deeper sounding board.
Thk their a lot thockier but I knocked the stems so they became scuffed lol. An extra hour of lubing. Also hope you keep on making badA?$ content like this!
That keyboard sounds like marshmellows
I just wanna know if you screw the stand offs? in the plate to pcb?
First of all thanks for the amazing video. I've got a question though should I go for CJ or Oil King ? seems like they are built in same way, price is also very similar. Do you have both to do a comparison of which is deeper sounding ?
If you're looking for a deeper sound, go with the oil kings! If you're looking for the smoothest stock switch of all time, go with the CJs. You can make the CJ's deep if you do what i did in the video, but bc of the materials, Oil Kings are deeper.
@@coleydotmp4 Thank you for the replay, Are Oil kings properly factory lubed or should I hand lube them and film them as well ?
@@DanielBerthellemy I think that depends - i'd try them out when you get them and see if its good enough/not worth lubing. but like every switch, they're gonna benefit from a full lube sesh. Id look into Keybored's review of them, he discusses the lube situation.
@@DanielBerthellemy i dont think they need films. if anything you might want to lube with 205g0, because factory lube isnt always the most consistent across all switches. again, i think you should test a few different oil kings when you get them. stock + different configurations of lubing
@@coleydotmp4 I ended up lubing and also filming my Oil King... The switches themselves are pretty tight fitting and the film isn't really there to make it more stable, but to change the sound profile. I do like it that way. and yes, the factory lube is pretty inconsistence
For the gat cj switch when lubing the tip housing cant we just do it without taking it apart just wondering
Kinda, it might be difficult to hit though. you would push down the stem and apply the lube. You should test it :)
Is there a way to fix the stabs since my stabs sound absolutely horrible. There is a ton of ticking and rattle
I am copying this same build, and I wanted to ask, how did you Lube the CJs could you upload a video or respond about that?
so you only lubed the top housings of the switch?
By the way I’ve got more then one set of gateron CJ switches and tested proper lubing them just the same as all my other switches and even tho the stock switch is super smooth the sound isn’t great … and I’ve typed extensively on 2 Kbd67 lites one with full lube and one stock and I like the lubed gateron CJ switches much better
Actually the lubed CJs are one of the smoothest and my favorites to type on … I wouldn’t worry that much about it lol 🤣. Personally for any CJ build from here on I will be lubing as normal for the sound and feel
By the way l would literally swap back and forth between the two boards and built them the same to do a proper test and yea idk what those people did to make theirs less smooth on taking them apart but I’ve seen and felt nothing besides extra smooth linear lol.
The thocciest I've gone was a 67 lite with a pom plate and U4Ts, with some MT3 caps of course
Ha! Yeah that'll do it.
@@coleydotmp4 I'd also like to see this :D
Did you use 80 or 50 mil noico sound deadener?
What is a PCB mod? 😮
what microphone do you use?
Hi there. I'm doing as similar build as yours and came across your video. I wanted to ask for the lubing of your switches.
Do you not lube the stem at all? So just the bottom housing, springs and the specific part on the top housing?
Reason I'm asking because you didn't really mention it and it's fairly different from luring tutorials I've seen
SPECIFICALLY on Gateron CJs. every other switch follow my lube guide on my channel!
Do you think noico generally makes a board sound deeper? Ive tried filling my board with packing foam (not that dense) and eva foam (more dense) and the eva foam seems to yield a higher pitched sound compared to the packing foam. Since the noico is denser than these two im kind of afraid that it will make my board overall clackier
my thockiest build is actually a modded keychron k6 with tealios. I have a few other thocky builds, but I prefer clack. Sadly My only clacky build is a mode 65 with memesicles. Cheap clack is hard to find :(.
For your gateron cjs did you lube the springs also or only the top housings?
Coley wha do you think of oil kings used stock?
arent they factory lubed? if they are you should be good! :)