How To Make A Pickup Bed Divider
HTML-код
- Опубликовано: 24 дек 2024
- Step by step guide to making your own pickup truck bed divider. Quick and easy and straight to the point. Questions and comments are always welcomed. I get back to everybody.
Discount links
15% off link for lamin-x
laminx.refr.cc/...
White hat holsters link
lddy.no/12v65
Nice! One suggestion…use equate Walmart brand trash bags. Half the price of Glad, same product.
Sounds good to me brother.
Good ol' wood! Seriously thanks for this. I feel better knowing I'm not the only guy who refuses to spend 2000 for spring-loaded roller bearing glam.
You’re definitely not lying. Solid and never fails. I always say keep it simple. Thanks for the feedback brother.
This is a WAYY better divider than the plastic one from ford. The best part is if you actually need to use the bed you can simply pull it out and place it on the side. Brilliant man!!
Much appreciated my friend. I tried to make it easy and way more solid than one that can be purchased aftermarket. Thanks for the feedback brother.
I don't know if you mentioned it but owner's manuals will often give measurements. My Ranger's manual gave the lengths of 2x6 to add a 2nd level to the bed to carry full 4x8 sheets. I am going to check mine. If not I will measure. Thanks! I had forgotten all about things like this in the bed.
I’ve never even checked my manual out. I got to look into it thanks for the info brother. Let me know how you make out.
One safety tip for DIY out there. NEVER cut towards yourself with a power tool. ALWAYS cut away from your body, limbs, etc.
Lol your correct sir. Thanks for the pointer.
Seriously use some $5 clamps
Same with utility knives!
Well why didn’t I think of this on my own? Very nice video, super easy project thanx!
You’re very welcome brother. Thanks for the feedback.
I bought a bed extender. Serves as a bed divider when the tailgate is closed. Easy peasy, no sneezy.
Nice brother
Omg 12 years with an f150 and i didnt know the bed already came with those slots for dividers! I didnt know this about pickup trucks
It’s crazy huh. All the brands have their own spacing and setups. Glad I could help out brother.
I’m amazed this guy still has all his fingers.
Yeah, wasn’t my best use of a saw but I’m 10 fingers strong still. lol
Wondered if I was the only one thinking that!!!!
If it gets wet does it expand? Thanks for the great video!
@@WilliamHause-bw9in glad to help my friend. I used pressure treated lumber so it’s water proof. Still holding up great to this day.
Simple, easy. Just the way I like it. I hope you painted it black. Thanks.
Thanks for the support my brother. I didn’t paint it black because it was treated wood. I was thinking of making another one and burning in a logo or something to that effect on the wood. God bless my friend.
1 thing not mentioned, the rubber piece isn't necessary if you have a spray in liner. If so, theres no need to cut a 1/2 inch off
You are correct sir, good point.
great job and great video, thats a very clean truck, Where do you keep it, in the Kitchen, nice job
@@andrewbratos6907 lol don’t tell anyone but I keep it in the bedroom 😂. Thanks for the support my brother.
Nice job. Thanks for taking the time to make and share.
You got it my friend and thanks for the comment.
A buddy of mine showed me this a few years back. I didn’t own a truck back then, so I figured I’d make one for my current truck. Good idea to use cardboard to match the curvature 👍🏾. I’m gonna wrap mine in speaker box carpet and add a couple small d-rings to be able to bungiecord stuff as well.
@briangarcia2358 glad to help brother. Now you got me thinking of the speaker carpet now lol. Thanks for the ideas.
@@MrV2u I’ve wrapped lots of wood pieces in my off-road van using gorilla glue spray and that grey speaker carpet. Super cheap and hides all the wood imperfections
@briangarcia2358 yeah I’m definitely going to do it too. Thanks for the tips brother.
Sup bro would it work without having to round out the corner edges?
Yeah it’ll work no problem. I just wanted it to look a little nicer.
@@MrV2u thank you 👍🏼
Nice one mate. You have inspired sort it on my own pick up.
Thats awesome mate, let me know how you make out.
Nice Wrangler Duratrac! Best tire ever!
I wish they had them for 22 inch rims. These nitto ridge grapplers are pure trash.
May not be rocket science to you, but it seems a to me!!😂😂. To start off with, I don’t even own a jigsaw….so that should tell you something, right?!?!
You think the guys at ACE Hardware might could cut it for me? Do they do that sort of thing for their customers?
I try to make my videos as thorough as possible for those who don’t know brother. I know for a fact Home Depot will cut the wood for you, or they might have a hand saw there for you to use. Let me know how you make out and thanks for the feedback my friend.
Nice, simple,@ effective!
Thanks my friend. Works like a charm.
Thank you - very helpful
You got it my friend.
No battery drill?
@@Noeau for what ?
@ he using electric drill to fasten the trim on the board. Most would use a battery drill.
@@Noeau it got the job done no?
That's awesome man. I'm gonna try that. Thanks brother.
Glad to hear brother. Let me know how you make out. Thanks for the feedback.
Interesting video. Why not just buy a ratchet divider bar from the hardware store?
@@tugboat8475 cheaper and one of a kind. I was going to burn in some type of design which I never did lol.
@@MrV2u I'm getting an aluminium canopy installed next week on my Nissan Warrior, that's when I started looking for what to stop stuff from moving. $45aus for bars
Nice brother, enjoy the setup! Send me a Hilux. Wish we could get them over here.
Sand down and use Thompsons water seal
@@JamesHoots That wasn’t necessary for pressure-treated wood, but it’s a great idea for regular wood. Thanks a bunch for the tip, my friend!
I have sprayed in bed liner, I bought some roll on bed liner and coated the board to match the bed
@ good deal brother.
Using the bottom of a cup to round off that corner on the board would be a quick way to get it done.
That’s a great option. I wanted a more exact fit brother.
@@MrV2u gotcha, I thought your board didn't sit flush on the bottom, my bad.
I would do this is I didn’t have a swing case in my bed. I just use a storage bin bungee’d to one of my tie-downs for groceries 😂
Lol that would work as well. Enjoy that truck brother.
Where is this truck bed liner?? That’s what will protect the paint
You would think with a $67k truck it would of came lined. I’m going to line it myself soon. Stay tuned for the video.
Liked it...and the work to prep it was real helpful...
I really appreciate it brother. Glad to help and if you have any questions I’m always around for advice.
that's exactly what i been thinking of doing. because i don't have my other car
Get er done brother. Let me know how you make out.
This is great, thanks. I'll be attempting this today.
Measure twice brother before you cut. Let me know how you make out or if you have questions. Good luck
@@MrV2u I actually measured then cut a small length of wood first, then used that to get the width right on the larger sleeper. It worked well - I put some felt on each end and I have a rubber mat on the tub. I used a 50mm wide sleeper which is the same width as the recess in the tub. Happy days, thanks again!
@@themictionary awesome brother. Thanks for the update. Enjoy that truck.
A for effort and thanks for sharing. But I definitely took some inspiration from the video and realized what I didn't want to happen with my project.
What was that brother?
New York?
Absolutely brother
@@MrV2u nice! Wife is from cutchogue. I'm from the south. Met a lot of good and kind people up there, sometimes more so than my fellow southerners. Be safe!
@@seraph1926 yeah upstate New York is completely different than the city. Where down south? I’m looking to leave New York in the future. Thanks brother you stay safe as well.
Nice work
Thanks brother, I appreciate the feedback.
Man if I got my 2017 Titan used in 2021 and thanfully it has a drop in liner, i don't think i could throw shit in the bed with bare paint. I got those groves on the liner but fucked up and cut the wood without pressing the liner hard against the bed for a true measurement 😂😂
Got a 7 year old and now a newborn so mom rights in the back so i throw the groceries in the front seat but it's limited. Need a little grocery divider for now till little man is cool riding solo without mom riding in the back.
Congratulations on the newborn brother. Yeah I’m going to make a video soon on lining the bed lol. I have a full truck with the family so my only option for going shopping was the bed. If you’re so inclined you can even cut a couple boards and screw them into the wood to make dividers. Then it might make it a little difficult to get it in and out. Your lil man is going to grow up fast so enjoy it every step of the way.
Great idea!!!
Thanks brother.
Great Job!!
Thanks York.
Excellent! Thank you!
You got it my friend. Let me know how you make out when you make yours.
Measure twice cut once.....
Absolutely brother.
Inspired me!
Good deal my friend.
My neighbor did the same thing, but he sprayed the wood with rhino liner coating.
Never thought of that! Sounds promising though.
Why are we worried about scratching the bed. It's going to get scratched.
You can do what you want bro. I gave up trying to prolong the inevitable. A leaf landing on my tailgate a scratched it. 😂
Use the proper jigsaw blade.
@@wk7060 good idea
Thanks…!!!
You got it brother !
Is it just me or does it look like he cut that thing too short?
Not at all, there is room for the molding that I accounted for. It’s snug as you can see in the end.
Ground control to major Tom
David Bowie ?
Nice.
Thanks brother.
yessir....💪🏾💪🏾💪🏾💪🏾
Thanks brother.
100%
Thank Mark.
Good lord! Make it longer so we can see a total of 42 advertisements...
Lol I’ll try for my next video.
Lol all that time for cutting a 2x10? Waste of time
Sort of like me reading this comment
Well that was a giant fail
How you figure? It does what I need it to do.
I bought a bed extender. Serves as a bed divider when the tailgate is closed. Easy peasy, no sneezy.
@@robbiehopkins9692 yes sir
Ground control to major Tom
David Bowie is back.
@@MrV2u😝 Good vid man I'm gonna make something like this👍
@@levis569 awesome man let me know how you make out.