Hi Anukriti..that's v awesome. I can't make pop paste and then cones out of it due to lack of time .can I use 3 d liners instead? Any other readymade outliner can be used?
Thank you 🙂 and u can easily use 3D outliners. Also if you want cones for this kind of work, you can find pre-filled ceramic cones at stores like Itsy Bitsy
Lippan is traditionally done with clay. However, i have worked on an entire wall using ceramic powder mixed in a cone. I guess, by that principle, even POP in a cone would work, although I have not tried it on a wall
Yes Mam you can 🙂. Just be careful with the amount of water you add. Start with very little. Please do check the video I have made where I tell how to make POP mixture and cone
Thank you 😀😀. Actually difficult nahi hai bilkul. Maine recently coasters banaye hain. Aap woh video dekh kar start kar sakte ho. Uske baad ye bhi bana paoge
Maine banaya nahi hai isliye main comment nahi kar sakti. Theoretically to kar sakte hain lekin actually to jab koi cheez use karte hain to problems pata chalti hain
@@mohinirabadiya3304 it's easily available on hardware or paint shops. However, you can buy it online as well if you do not plan on going out due to coronavirus. Just to let you know, it costs about 15-20 ₹ per kg at hardware or paint shops, but online at Amazon it is available for 150₹ for a kg.
Thank you 🙂. It will not harden if you use Fevicol to make the mixture. Don't use any water while making the cone and make sure you keep the mouth of the cone covered with cello tape when you are not using it
So so beautiful work
Thank you 🙂🙂
So cool! Gorgeous 💜
Thank you 😀
Beautiful and look so elegant.
Thank you 🙂
Beautiful work
Thank you 🙂
Too good, thnx for sharing
Thank you for appreciating it 🙂
ZazakAllah Khair dear :)
Thank you 🙂🙂
It's really wonderful,
Thank you so much 😀
Awesome 👌👌
Thank you 🙂
It's looking very.... Sundar.... Really.... 👌👌👌
Thank you 🙂🙂
What a beautiful piece of craft..
Sachi!
Bahut sundar! ❤️❤️💖💕
Thank you so much 🙂🙂
Mam your work is suparb
Thank you so much 😀
Best technique
Thank you so much 😀
Awesome
Thank you 😀
Awesome, no words 👌👌👌
Size of board is 12inch by 12 inch, right?
Thank you 🙂🙂
@@poojagabra8694 yes Ma'am
Beautifullllllllll
Thank you 🙂
Beautiful
Thank you 🙂
MyGOD! Awesome.very beautiful.
Can i get a suggestion for doing the similar work on a piece of tile?
Acrylic cones will help instead of pop?
Thank you so much 😀. You can use pop cone or acrylic cone. Both will work, but you will have to seal them both or they might peal
How to seal the art?
❤️ nice 👍
Thank you 🙂
Too good will try this thanks for upload,just now Subscried to u ,
Thank you 🙂
So beautiful
Thank you 🙂
😊👏
Mam is type ke or define bty muje ye bahut acha laga aap ke diy bahut ache hotel hai thax🤩🌹🌷🥰
Thank you 😀
Hi Anukriti..that's v awesome. I can't make pop paste and then cones out of it due to lack of time .can I use 3 d liners instead? Any other readymade outliner can be used?
Thank you 🙂 and u can easily use 3D outliners. Also if you want cones for this kind of work, you can find pre-filled ceramic cones at stores like Itsy Bitsy
Thank you ☺️
It looks like mud painting 😍 how can we colour it?
I wanted the color of POP in this video, so I did not color it. If you want, you can use acrylic colors
Hi v nice what’s pop cones?whats material it is
Thank you 😀. POP is plaster of paris that is used during construction
How much mirrors use in this
I want to do lippan work directly on wall..what material should I use?
Lippan is traditionally done with clay. However, i have worked on an entire wall using ceramic powder mixed in a cone. I guess, by that principle, even POP in a cone would work, although I have not tried it on a wall
@@AnukritiCrafts okk ty 😃
Can we use chalk powder in place of pop???
Yes Mam you can 🙂. Just be careful with the amount of water you add. Start with very little. Please do check the video I have made where I tell how to make POP mixture and cone
@@AnukritiCrafts thx for the prompt response maam
It looks beautiful.... but humse na ho payega😂
Thank you 😀😀. Actually difficult nahi hai bilkul. Maine recently coasters banaye hain. Aap woh video dekh kar start kar sakte ho. Uske baad ye bhi bana paoge
Beautifuĺ
Thank you 🙂
Does plaster of paris not crack after some time
No Mam. If you mix properly, it won't. I have pieces that I made years ago and they good as new
Wall putty se bhi kr skte hai eh
Maine banaya nahi hai isliye main comment nahi kar sakti. Theoretically to kar sakte hain lekin actually to jab koi cheez use karte hain to problems pata chalti hain
Kon ma lippan maj favicol nakhyu che??
Aap please Hindi ya English me question pooch len
ye mitti wala kon kaha milta he
Corn kese bnate h???pop vala usme kya kya hota h?
Aap please is link par click karen. Maine is topic par bhi video bana rakha hai
ruclips.net/video/tcAerK7ontA/видео.html
@@AnukritiCrafts thank you
Hiii dear I have tried pop cone but e pura hi hard ho gya & it's not smooth also please can u describe in detail wanted to make it urgently &
Isko hang kese kiya mam plzz tell me
Iske peeche aap sawtooth hook ya command strips laga kar hang kar sakte ho
From where can i get this canvas mam?
You can get them made by your local carpenter. If that is not feasible, then you can just as easily use a 12/12 inch piece of 12mm plywood or MDF.
Pls tell the Ratio of pop, water and fevicol for cone
I will share a video on that tomorrow. Please stay tuned
Can you share the video of pop cone ratio. I didn't find the video as mentioned in your channel
How to make this pop paste??
Please click on the link below where I show how to make a cone and POP mixture
ruclips.net/video/tcAerK7ontA/видео.html
what have you used in the cone?
I used plaster of Paris mixture
Anukriti Crafts where can i get that from
@@mohinirabadiya3304 it's easily available on hardware or paint shops. However, you can buy it online as well if you do not plan on going out due to coronavirus. Just to let you know, it costs about 15-20 ₹ per kg at hardware or paint shops, but online at Amazon it is available for 150₹ for a kg.
Ceramic cone video please
Soon Mam and thank you for your suggestion 👍👍
Beautiful
I try but pop cone get harder in few minutes
Thank you 🙂. It will not harden if you use Fevicol to make the mixture. Don't use any water while making the cone and make sure you keep the mouth of the cone covered with cello tape when you are not using it
I am in USA so fevicoyl is not available so used Elmer glue
Thks for replying ur are just amazing
@@krupatalati155 thank you 🙂
@@krupatalati155 any white glue will do
Mam how can i get print on big size paper??
Printer shops have machines for this. In fact, the prices are quite affordable even for bigger printouts
@@AnukritiCrafts thank u mam for reply.
Hi mam ,hume mirror kaha se mil sakte he
Ye aapko local craft stores par mil jayenge. Kuch stationery shops wale bhi rakhte hain
Thank you
Can we use ceramic powder?
@@hiraldodiya4438 Yes Mam, you can
Nly pop..
Plaster Fevicol aur Teesri chij kya hai
Paani