Just wanna wish you all happy new year for 2025 I know it’s a little early but still can’t wait to see what you guys got going on next year it’s been an absolute blast watching you all can’t wait 😊to see
The Rock is a no bad looking bike. It's the balloon looking tyres which the over all look down. The rear wheel totally changes the look, just need to get the front wheel sorted out now.
Now, they need to take it for some engine work at Carpenter Racing. Look them up to see what they can do. They build them to smash bolt on Busas in a roll race with ease.
@@johnmclean4911good point. I wonder what the margin of error could be acceptable in keeping a wheel center. Obviously center is best, I’m not arguing that
@jasonm9264 to be honest with I could see him buffing/grinding the swing arm. I don't think it was to much to get the tyre to fit correctly. The bike is a shaft drive so you would only have to buff/grind in a very small area. That's because you don't have the rear wheel to move to adjust a drive chain/belt.
Watching the start of the video, i was about to throw a joke and suggest to take the angle grinder and make more room, but then , OMG , they are really going to do it.
Nice....Chris. What's going on with the kawasaki zx14? I've been watching Kings Of Grudge. Some of those guys 14s been putting in work. I'd like to see you on there.
Brotha Chris, quick question and comment: Question; where did you get the 280 rear tire from and would it directly fit on the OEM rim for triumph rocket or would a person need a custom rim? Comment: You would NOT need a supercharger if you brought it to CarpenterRacing and had them do excellent internal engine work for you. You could probably do a quarter miles in less than 9.7 seconds with CarpenterRacing expertise...
The very first thing he talks about in the video is the rear tire and the rear wheel. The wheel is 18 inch wheel, up from a 16 inch wheel from factory and the wheel is also wider.
Is the fender extender wide enough. It looks a bit narrow on film. It'd be a shame to get paint and parts chipped from road crap. I'm NOT doubting cris and his teams skills, it may have not been thought about. Or has that already been explained and I missed it, I'm a bit on the unsafe state to ride, it's new year c'mon lol. She's a beast bruv.
That bikes got an identity crisis, but u know when u getting older like Chris is it's a transitional bike, so it's like when u get older u go from the house to a nice villa/townhouse with an hoa that cuts your grass, he already has the next transitional bike that Harley he bought, that's when u go from the villa/townhouse to nursing home, I'm just kidding but he needs to quit screwing around and get that supercharger I watched some videos with same bike and the blower it's nasty but he is coming off of the pavement pounder might be a little scared of all that triumph power
That thing is a muscle bike!
TTS SUPERCHARGER 🎉🎉🎉🎉🎉
This would be great. I would love one for my K3
I would NOT weaken the integrity od that swingarm/ shaft housing for the sake of a larger tire... but that is just me.
My friend has cut his swing arm on his rocket. Seems to be holding up for his 260 tire.
Probably more stout than the stock setup
I agree I would shave a little bit of rubber on the tire that absolutely wouldn't affect the integrity of the tire.
Excellent decision‼️🏍💨...beautiful machine
Happy New Year to you and your family! Can't wait to see what 2025 has to offer! Thanks for everything you do!!
Where did you get the rear wheel(custom or ?). What brand tire?
Looks great, bike is really starting to look spot on. Happy new year
As they say “Go Big Or Go Home”…lol Sick Rocket Chris, diggin all the carbon mods! Happy New Year!
Just a Happy New Year to you and all the employees at Moore Mafia!
That is the rear tire that should have come on this. That looks *GOOD!*
Happy New Guys!!! Bike looks awesome with the big tire...
THANK YOU FOR WHAT YOU DO
Why didn't you get a sharp blade and trim the edge of the tire, or the thinnest of washers on the back side of the wheel?
Dang that is pretty slick
Just wanna wish you all happy new year for 2025 I know it’s a little early but still can’t wait to see what you guys got going on next year it’s been an absolute blast watching you all can’t wait 😊to see
Happy New Year to all! That 280 tire is a monster!
Rear tire conversion looking really good. HNY
Peace n happy new year!
Happy new year
Happy New year 🎉 ✨️ 💛
Happy new year 🎉
Damn, that tire is the one straight off of the Batcycle!!!!
I’ve never understood why people hate on wide tires. Thanks for the video
The Rock is a no bad looking bike. It's the balloon looking tyres which the over all look down. The rear wheel totally changes the look, just need to get the front wheel sorted out now.
The tire is easy to get, but where I can buy that wheel?
Reminds me of the rear tires on my Camaro. :)
backyard mechanic… it’s all that comes to mind.
Nice!
Hey Chris!Can you do a dyno test on kove 450 RR please???Merry Christmas and Happy New Year....more blessings bro...keep on creating new videos
Now, they need to take it for some engine work at Carpenter Racing. Look them up to see what they can do. They build them to smash bolt on Busas in a roll race with ease.
Dope 🔥🔥🔥🔥🔥
Would almost rather run a 3-4mm spacer vs grinding on a swingarm.
Yes very true but it's not a car the 3 - 4 mm spacer would take the rear wheel off it's center by 3 - 4 mm 🤔
@@johnmclean4911good point. I wonder what the margin of error could be acceptable in keeping a wheel center. Obviously center is best, I’m not arguing that
@jasonm9264 to be honest with I could see him buffing/grinding the swing arm. I don't think it was to much to get the tyre to fit correctly. The bike is a shaft drive so you would only have to buff/grind in a very small area. That's because you don't have the rear wheel to move to adjust a drive chain/belt.
How do I get this wheel and tire
Chris, for me there was only one thing missing, the front tire, also for track, with a lower profile!!
Watching the start of the video, i was about to throw a joke and suggest to take the angle grinder and make more room, but then , OMG , they are really going to do it.
thats a cool bike.
Nice....Chris. What's going on with the kawasaki zx14? I've been watching Kings Of Grudge. Some of those guys 14s been putting in work. I'd like to see you on there.
Didn't know you're into fishing bro. 👍
Beauty of making clearance for a tire...as long as you're close she'll correct the rest by herself with a ride or two :P
Very true!
Happy New Year To You all Moore Mafia Family.❤
THANK YOU, and I hope you and your family has a good one as well!
Oh dear its going to stand up on its own 🤷🤣 impressive.
Brotha Chris, quick question and comment: Question; where did you get the 280 rear tire from and would it directly fit on the OEM rim for triumph rocket or would a person need a custom rim? Comment: You would NOT need a supercharger if you brought it to CarpenterRacing and had them do excellent internal engine work for you. You could probably do a quarter miles in less than 9.7 seconds with CarpenterRacing expertise...
The very first thing he talks about in the video is the rear tire and the rear wheel. The wheel is 18 inch wheel, up from a 16 inch wheel from factory and the wheel is also wider.
@@My.name.goes.here.he asked if the tire would fit on the stock rim.
@@NANA-lq5md NO... 18" diameter wheel vs the stock 16" diameter wheel.
@@ismaelramos8687 I’m aware. The OP is not though.
Nice🔥🔥🔥🔥
Where can this 18in rim be purchased. Thanx
🔥🔥🔥
Very nice
Appreciate it!
I definitely would have shaved the tire instead of touching the bike. If it's not that much space, it's not going to hurt the tire in that area
Cris!!! When are you going to supercharge this bike lol
Pleeeeease tell me your gonna supercharge it
Is this just for looks or ride quality?
I'll be taking it for a ride soon. Right now the weather is garbage.
Is the fender extender wide enough. It looks a bit narrow on film. It'd be a shame to get paint and parts chipped from road crap. I'm NOT doubting cris and his teams skills, it may have not been thought about. Or has that already been explained and I missed it, I'm a bit on the unsafe state to ride, it's new year c'mon lol. She's a beast bruv.
Better off grinding on the face of the hub face. It’s way over built anyway.
That bikes got an identity crisis, but u know when u getting older like Chris is it's a transitional bike, so it's like when u get older u go from the house to a nice villa/townhouse with an hoa that cuts your grass, he already has the next transitional bike that Harley he bought, that's when u go from the villa/townhouse to nursing home, I'm just kidding but he needs to quit screwing around and get that supercharger I watched some videos with same bike and the blower it's nasty but he is coming off of the pavement pounder might be a little scared of all that triumph power
M109R wanna be
Finger crossed on the sick ass one up for raffle i put down on