Challenger Jack Points, Stand Points
HTML-код
- Опубликовано: 23 мар 2023
- 4,000 lbs (not tons). You can use not less than a 1.5-ton jack.
Lift Pad Pros - www.liftpadpros.com
Pinch Weld Jack Point Adapters - amzn.to/3lvpskG
Wheel Chocks - amzn.to/40uBXMt
3-Ton Padded Jack Stands - amzn.to/40smMTF
1.5-Ton Floor Jack - amzn.to/3JJt3Un
Fumoto F106N Oil Drain Valve Kit - amzn.to/3LOPEkW
Dodge Challenger Best Upgrades
Hellcat Carbon Fiber License Plate Frame - amzn.to/3yUfTio
Carbon Fiber License Plate Screw Caps - amzn.to/3FILRBU
No Damage Removeable Front License Plate Holder - amzn.to/3FGkfxo
Hellcat Key Fob Leather Chain - amzn.to/3yULr7J
Key Fob Covers Red/Black (solid back) - amzn.to/40bslpZ
Key Fob Covers Red/Black (windowed back) - amzn.to/40bsslp
Hellcat Tire Valve Stem Caps - amzn.to/3lzYJni
Dodge Challenger Jacket (good quality) - amzn.to/42uAQxW
Faraday Key Box + 2 Pouches - amzn.to/3lvpzwC
SRT Hellcat Zip Hoody - amzn.to/3TyLM9K
Colored Radio Knobs - amzn.to/3TB1hOp
RokBlokz Widebody Rally-style Splash Guards - amzn.to/3Txq2uM
RokBlokz Widebody Splash Guards - amzn.to/3LD8QSH
Factory Splash Guards (not for widebody) - amzn.to/3lqrqTD
SRT Hellcat Door Sill Guards - amzn.to/3Jxtr8t
Challenger Sill Guards - amzn.to/3FFlUTX
SRT + Hellcat Logo Puddle Light - amzn.to/404W2cj
Hellcat Logo Puddle Light - amzn.to/40oRmxB
ScatPack Puddle Light - amzn.to/3JXakpA
Challenger Icon Side View Puddle Light - amzn.to/3FEWV2U
Challenger Icon Front View Puddle Light - amzn.to/40sXpBt
Cup, Change, Door Pocket Guards - amzn.to/3Z2JCjL 
Авто/Мото
Those threaded lift pads and magnetic pinch weld pads are genius.
Thanks dude! Great info. I needed this for work I’m doing on mine tomorrow, just made my day
I've never changed my jack fluid lol. Been using the same one for 12 years or so. Still strong.
You nust have one of those made in USA jacks 😁
@@TrickMasterPC 😅 idk. It was a Pittsburgh model from harbor freight haha.
This is a fantastic video. It blows away all others that try to cover this subject! Thank you. I used your links to order the items you mention.
Your video is the best and your showing of the jack and jack stand points is very very clear and easy to see where to find it on your challenger. I have a 2023 Scat T/A MT6. It would be good to see a video on how to bleed your jack. I have a 2 ton Daytona low profile and bought it from Harbor Freight.
Thanks! Your Daytona jack is actually made by Snap-On. It's a very good jack!
Thanks for making this video, helped me a bunch and the links in the description also saved me some time!
Glad I could help!
@@TrickMasterPCDude, there are no lift pads under my car that came from the factory.
C'mon now. 🙄
My front lift pinch point readily accepted the Byenins magnetic slotted pad, but the rear lift pinch point initially did not accept the same magnetic slotted pad. However, I realized that the bottom rocker panel is tighter fitting against the rear jack lifting point compared to the front lifting pinch point. I had to slightly pull away the rocker panel from the rear pinch point to install the Byenins slotted pad. I had also installed all 4 Lift Pad Pros (with no logo) on my 2022 Dodge Challenger RT. It was remarkably easy and quick to do after watching your related video. I was surprised how easy it was to loosen the factory rear jack pads. I used Loctite blue 242 on the lift pad bolts, and I tightened the bolts with my 3/8" drive socket. I could not use my torque wrench since my Husky torque wrench started at 50 foot-pounds. I had to remember to keep the little brass washer on the upper side of the rear plastic panel as I installed the factory bolt through the new rear lift pad, pressed in the plastic panel, and tightened up the lift pad bolt with my 3/8" drive wrench.
Challenger does not weigh 4 tons, weighs about 4000 lbs or 2 tons.
Yeah, I meant 4k pounds but too lazy to edit...
Guok84 I5 o 93.36l8
Great info & thanks for the links! 😎👍
Ordered all those & got them already. I accidentally ordered the taller jack stands so I'll be returning those for the shortys
Great information.
Thank you
Fumoto is a must!
Well explained.
Gonna be interesting in a few months when I start changing wheels myself... seasonal storage fee's are nuts.....daily driven Scat Pack with the Dynamic package and stick..
Awesome video, honestly best one across all of youtube, straighforward and clear
Couple questions as I have a similar setup (daytona HF floor jack + esco low profiles + liftpadpros/ZL1 permanent/temp-pinch weld adapters
?have you noticed over repeat jacking that the outer sheet of the pinch weld (two pieces of metal) gets slightly deformed outward; don't get me wrong the whole thing isn't bent and I've always been using the ZL1 temporary pinch weld adapters
?is your front Exhaust Pipe/Converter (part 68474162AD), your lowest ground-clearance part? mine are ~4-4.5 inches off the ground
?does your frame creak a bit when you jack the front, like you said with the rigidity the rear wheel comes up too a bit...
The bending can happen if your jack is not able to roll freely/easily. Yes, the lowest point is where the exhaust connects just after the cats. Yes, the vehicle will stress creak if you jack one side too much, you need to jack both sides as evenly as possible. Thanks for the props!
Great vid man! I'm about to swap out pads for power stop carbon/ceramic and ceramic coat my wheels and calipers while I'm at it. Thanks!
Sounds great!
I'll need to jack up the car via the Frame, as i'm only changing to winter rims. silly me I bought trolley Jack pads but sadly my goof as they don't fit so i'll have to do it via the frame. got a 3 Ton hybrid jack...hope I don't have to run out and get another set of pads....already got my heavy duty Chocks to chock both sides of the opposite wheels.
Love the video. Super cautious with my 22 SP WideBody and this definitely introduced some must haves on the “mod list”. What rock guards do you have installed? I tried the ZL1 add on deluxe set and they were hardly blocking any of the wheel plus the metal retaining clips were scratching the paint! I appreciate any help in advance!
Rokblokz, check it ruclips.net/video/q4SdI0OvkvI/видео.html
thankz for the video
My 2016 doesn't fit those pads on the front or back, the plastic rocker panel is in the way and pulling it out enough to accommodate the magnetic pad feels like it's going to break the panel
Jacked a 2022 challenger front passenger side and the rear tire same side came up with it. Felt funny driving it after it was lowered. Anyone else had this problem?
Yeah, the unibody frame is ridged, but it still tweaks, so you have to jack up both sides evenly to prevent frame tweaking. Likely it should settle back out.
What do you mean felt funny? Is it squeaking?
Thanks so much for the video! My rockers are damaged near those pinch weld cutouts and I think it was due to improper floor jack use at the tire shop. I’m taking it to an auto body shop that uses rubber pads on their lifts. Is it possible to lift from those cylindrical things only and not touch the pinch welds at all?
Yes, they are lift pads, so you can jack on them and/or put stands under them! Thanks for the good feedback!
Please make one for the Durango. There’s no videos on it!!!
Why not use jack on the lift pad pros, and let it rest on the pinch welds with a saddle-type jackstand?
Using jack stands on the pinch welds doesn't provide appropriate stability if you're shaking the vehicle around. I just installed a Magnaflow XMod exhaust today and the car was definitely shaking.
Im not a big fan of the pucks. Ive seen so many mangled up pinch welds that I dont feel like using them on my cars. But I need to do oil changes (I have 4...thats a lot of back and forth just for a 2 post lift)
The ramp idea thats floating around is also nice, and no risk of frame buckling, but, the car wont be level, nor are the wheels free, so its only for fluid changes etc. These cars clearly were made only for a 2 post lift and not to be jacked up at home. Ive been trying to come up with a way to do this, that is safe and not a total pita.
Add to this that some cars are delivery miles cars in collections, that cant show the tiniest of scratches, frame, pinchweld etc. The closest Ive come to as ideas are similar to what trucks and buses have. Individual wheel jacks (like the foot jack wheel dollies for locked wheels) but meant to raise the car up higher, and are connected ether 2 or 4 or more at a time (more for trucks and buses with tag axles etc). But thats getting into lift money, though they can be used on any flat surface, even driveway.
Forgot to add my challenger did not have any lift pads on the rear. Maybe the dealer personnel stole them.
So basically I can’t do it today because I have to order a bunch of stuff 🥴
I'd recommend it to avoid damage
Does anyone know of a video where the guy actually puts the challenger on jack stands? I'd almost pay to see it.
In my xmod exhaust video you can see the front of the car on stands. While installing the exhaust I had all four wheels off the ground with the car on four stands and used the exact same method described in this jack/stand points video.
I'm assuming Chargers are pretty similar?
Yes, very similar locations
Do u need a low profile Jack?
No you don't, any roller jack or scissor jack should work without issue.
Who ever told you to change your jack oil every 6 months lied to you lol.
All the top google search results for "how often do you need to change hydraulic jack oil" said the same thing...
Same oil in mine for 33 years... it’s doing fine 😉
You can't just lift the front end by the K member eh? Bummer
vehicle is 4 TONS ? WHAT ? Is American Ton more than in Europe? Should weight 2 Tons on the label ...
Yeah I meant 4,000 (4k) pounds, not tons, but too lazy to edit and most understood what I really meant.
This is completely stupid design. I understand this is a hell of a car but it should not be this hard to lift the f****** car up.