If your TPMS Light is on WATCH THIS - Autel MaxiTPMS TS508WF Unboxing and TPMS Check
HTML-код
- Опубликовано: 18 авг 2023
- Does your car, truck, SUV or van have that dreaded low tire pressure light on again? Not sure why? Just wish it would go away??!! You need to watch this video!
The Autel TS508WF TPMS re-learn tool is essential for all aspects of TPMS sensors including checking tire pressure, re-learning sensors to your vehicle, programming new Autel sensors and much more!
Come along as we unbox this advanced tool which is essential for anyone with a TPMS based tire pressure system and a must-have for any tire shop in today's world.
Be sure to check out our second channel @FreshVintageGarage dedicated to scan tools and shop equipment!
Check out the Autel MaxiTPMS TS508WF TPMS Relearn Tool Here:
amzn.to/3qH30Yo
Check out the AWESOME Autel Store on Amazon Here:
amzn.to/3E5MfJH
By using my Amazon affiliate links I may receive compensation for purchases through these links at no additional cost to you.
Thanks for watching and have a Blessed day! 
Авто/Мото
Looking back on the TS508, it is a handy tool to have at home and at work. And the OBD Relearn function via Advanced Mode is impressive.
Thanks for watching and Subscribing! The TS508 is a really solid tool and is a must-have for any shop or DIYer definitely!
when comucation with the TPS put the 508 on the rubber of the wheel, it does not work well when you put it the valve stem, that is not a antenna.
Pretty sure if you use the magnet while scanning, you will get a better signal.
Tool doesnt come with one. The instructions literally says point the sensor at the tire not the sensor or rim. He us using it wrong. Seems to work better on larger tires like on a truck
Magnet is not for better signal, it is to tell the OME sensor to go into relearn status (OEM sensors on 2003 and older vehicles, may be activated when a magnet is placed over the sensor valve stem)
Heard that this unit only do Autel sensors, not all sensors. Is it true?
The question is bit unclear. But here are the answers;
If your question is whether you can use that tool to install OEM sensors, the answer is YES.
If your question is whether you can program OEM sensors so you can put old sensor ID into the new one, the answer is NO.
This tool can put new ID info into ECU, but cannot program non-autel programmable sensors or already programmed sensors, like OEM ones. (Also, even for Autel sensors, once programmed, it cannot be re-programmed)
@@ksong1496 I think you tell me what I needed. For example, if I rotate my wheels (oem tpms), can I relearn the position of the tires into the ECU with this tool?
@@Pccpy Of course It can do that.
@@ksong1496 Thank you.
You're actually supposed to point it at the tire not the sensor.
Thanks for watching! Off camera we tried that a few times with not much luck - some of the sensors we practically had to be touching them to trigger for some reason 👍
@@freshvintage ive noticed some respond immediately and some take over 10 seconds. Usually the old ones with weak batteries. Unfortunately it seems this scanner knows the sensor as ok battery charge not actually the state of charge. Its either working or dead