At 2:40, do not remove the plastic stubs the way he does. They are not designed to be pried out like that. It is much simpler. All you have to do it press in the center of it with something pointy(a screw driver works fine) and it will pop out.
So the way you remove that thing is by pulling on the thing that holds the other thing which you have to pull of the thing that hangs from the other thing,,,,, Great instructions on the thing bro!!
I appreciate it! You could probably check with a local Kawasaki dealer. They may be able to order the part for you. Or you can google search "Kawasaki parts house." This website sells Kawasaki OEM parts and you should be able to find it on there. I hope you get it all fixed.
No problem and I got them from t-rex-racing. They appear to be currently out of stock. The only thing about the no cut frame sliders is that if the bike goes down your going to have to buy a whole new set and reinstall them because the frame sliders will bend but they definitely do their job. My bike fell of its rear stand one time when changing the oil and the fairings and everything were fine but I had to buy a new set of frame sliders.
Death by Dudezki There are two pieces of foam on each side of the screw that holds the mirror on, you have to tear them off to get access to the screw.
Make another video, or overdub this one. The video does help (thanks btw) but your lack of terminology for molex type connectors, and the usage of the word literally is frickin annoying. Less "thingy", "thing", and "literally" and you'll have a well made video.
Thomas Hoff I made this video over three years ago and don't even own the bike anymore. Since you now know how to take the fairings off because of my video then maybe you could make a video of your own that has better terminology.
At 2:40, do not remove the plastic stubs the way he does. They are not designed to be pried out like that. It is much simpler. All you have to do it press in the center of it with something pointy(a screw driver works fine) and it will pop out.
Appreciate your time it helped reminding me where everything supposed to go So much...
Glad to hear the video helped. Just reverse the steps and it should go on pretty easy.
So the way you remove that thing is by pulling on the thing that holds the other thing which you have to pull of the thing that hangs from the other thing,,,,,
Great instructions on the thing bro!!
Thanks mate, i have a naked now. Will watch your video again in reverse.
I like the idea of the bags for the parts, I just mostly lose em on the floor ;)
Thanks for the video. I needed to remove the fairings to install some R&G frame sliders.
Great video, i was able to take my fairings off and replaced one side, now i need to see if i can get it back on lol
What sliders do you have installed tell me where you bought...
I appreciate it! You could probably check with a local Kawasaki dealer. They may be able to order the part for you. Or you can google search "Kawasaki parts house." This website sells Kawasaki OEM parts and you should be able to find it on there. I hope you get it all fixed.
Do I have to do all this just to install a headlight module?
Hi, me again, used same filter, was wondering if you could make a vid, aboutyour sliders, thanks a lot!
Hi man, what oil filter do you use?, just got a 2009 and kind of lost :p, great video!
Thanks! I just used the OEM filter from Kawasaki. Best of luck!
Hello ! please tell me what kind of sliders are installed, where can you buy them
They were T. rex racing night cut sliders
No problem and I got them from t-rex-racing. They appear to be currently out of stock. The only thing about the no cut frame sliders is that if the bike goes down your going to have to buy a whole new set and reinstall them because the frame sliders will bend but they definitely do their job. My bike fell of its rear stand one time when changing the oil and the fairings and everything were fine but I had to buy a new set of frame sliders.
hey man.. thanks for the video... can you tell me where you got those frame sliders?
Thanks and yeah I figured out the plastic pins thing after I made the video.
Thanks! 👍🏾👍🏾👍🏾
How do you re-attach mirrors if you remove them from the fairings
Just remove the screen/wind shield and the pop the cover under. You can then reach in and reattach the mirrors.
Where did you get those frame sliders from? No cut?
ActaFoolzz yes where did he get them I have the same bike just green
any ideas how to get the mirrors off this sucker? Thanks
No idea man. Sorry and best of luck.
Death by Dudezki There are two pieces of foam on each side of the screw that holds the mirror on, you have to tear them off to get access to the screw.
You know u can pull the whole nose cone off in one peice?
All u do is remove bottom fairings , the rest just lifts forward
Make another video, or overdub this one. The video does help (thanks btw) but your lack of terminology for molex type connectors, and the usage of the word literally is frickin annoying. Less "thingy", "thing", and "literally" and you'll have a well made video.
Thomas Hoff I made this video over three years ago and don't even own the bike anymore. Since you now know how to take the fairings off because of my video then maybe you could make a video of your own that has better terminology.
Rubber boot over the electrical connector