Justin , i discovered your job some weeks ago, you gived me an another way to see the wrapping. Your way to work is awesome, i love the tech of triangles and the glass game. I did some full wrapp before, but can't wait to wrapp my car soon to use your technic ! Thanks ! Greeting from Paris
Awesome technique to avoid too much tension for the wrap, another advantage it's modular a piece get damaged for a reason only that piece could be replaced !!
Excellent work! I look forward to wrapping my truck one day. One of the reasons for wrapping the purple over the green was to prevent water build up. Would water build up not happen with the mold and hold in place also? I've never done a wrap, so I don't know what I'm talking about, however, logically speaking, by adding the mold and hold it looks like you lost that benefit. Is that not the case? Thanks for the clarification!
Any advice for wrapping with a carbon fiber print? Other than just eye-spotting to match the weave, I don't see how else I can meet the top to the face of the trunk
wow. Beyond professional wrapping. I've seen a lot of wraps here in california but this is to an entirely different level of quality. What brand wrap is that?
Hi there, Thank you for your inquiry. Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
Amigo, lindo trabalho, sou fan de serviços assim, PROFISSIONAL pena aqui não ter cursos assim perto de onde moro como consigo essa fita com cordão para cortar o encontro dos adesivos
Hi there, Thank you for your inquiry. Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
Hi there, Thank you for your inquiry. Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
I think it would have been better to leave the gap behind the license plate for durability purposes. Cutting it out might look cleaner when the customer takes out the license plate but it leaves room for dirt and moisture to get it which then can damage the paint. Leaving it covered leaves a bubble thats protected. No?
Jesus H. Christ Customer will remove it in 3 years. A good quality wrap plus if the car is parked in a garage most of the time, you can get at most 7 years.
I think I understand the triangles and laying in versus stretching. But I am quite confused when I see you stretch around corners and say there's no tension! I'm missing something?
Hi there, Thanks for reaching out and we're sorry to hear you've been having difficulty getting your hands on our products. To find a distributor near you, here is our 'find a distributor' link: avydn.co/2tDDBfz. If you have any other questions, please connect with our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
Justin , i discovered your job some weeks ago, you gived me an another way to see the wrapping. Your way to work is awesome, i love the tech of triangles and the glass game. I did some full wrapp before, but can't wait to wrapp my car soon to use your technic ! Thanks ! Greeting from Paris
Excellent video and excellent job!
You are the best Justin.
Awesome technique to avoid too much tension for the wrap, another advantage it's modular a piece get damaged for a reason only that piece could be replaced !!
amazing!
Excellent work! I look forward to wrapping my truck one day.
One of the reasons for wrapping the purple over the green was to prevent water build up. Would water build up not happen with the mold and hold in place also? I've never done a wrap, so I don't know what I'm talking about, however, logically speaking, by adding the mold and hold it looks like you lost that benefit. Is that not the case? Thanks for the clarification!
THANK YOU SIR
excellent...
really is amazing :) but how foung this job?
do you have a video how to properly post heat
Any advice for wrapping with a carbon fiber print? Other than just eye-spotting to match the weave, I don't see how else I can meet the top to the face of the trunk
wow. Beyond professional wrapping. I've seen a lot of wraps here in california but this is to an entirely different level of quality. What brand wrap is that?
Since the video is sponsored by Avery I would guess it is Avery vinyl
Bob Katt valid point. thanks :)
The brand is literally the channel's name. Same name and logo, Avery Denisson :)
how would you guys wrap a trunk with a spoiler with out removing?
What's the name of that molding tape? And where I can buy it? Thanks!
Great video tho!
Mold And Hold.
how do you do a two piece trunk if it is the same color? mine has a built in ducktail spoiler sort of thing as part of the body work
Hi there,
Thank you for your inquiry. Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
nice job guys . can you give the link where to buy that molding tape you using on the overlap . thankyou ;)
Vytautas Corrado did you got respond where to buy the molding tape? I'm looking for it too.
Thanks!
no I havn't got anny respond
www.fellers.com/justin-pate-recommended/cat/squeegees-squeegee-covers-gloves-tool-belt/sub/squeegees-squeegee-covers-gloves-tool-belt/set/alko-alltak-mold-n-hold-black-edge-sealing-tape
Amigo, lindo trabalho, sou fan de serviços assim, PROFISSIONAL
pena aqui não ter cursos assim perto de onde moro
como consigo essa fita com cordão para cortar o encontro dos adesivos
Hi there,
Thank you for your inquiry. Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
Spettacoloooo
But doesn't the molding tape create a corner where water can get caught, I thought that's why you did the downwards overlap over the green vinyl.
what brand of wrap is that
👏👏👏👏👏👏👏
PPF X 5 👌
What’s the tool called that holds your trunk slightly open? Where can I get it? Please help
Hi there,
Thank you for your inquiry. Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
I think it would have been better to leave the gap behind the license plate for durability purposes. Cutting it out might look cleaner when the customer takes out the license plate but it leaves room for dirt and moisture to get it which then can damage the paint. Leaving it covered leaves a bubble thats protected.
No?
I noticed you said the vinyl is coming off in 3 years, is this because it will only last for 3 years or the customer only wants it on for 3 years?
lasts for 3 years
Jesus H. Christ Customer will remove it in 3 years. A good quality wrap plus if the car is parked in a garage most of the time, you can get at most 7 years.
I think I understand the triangles and laying in versus stretching. But I am quite confused when I see you stretch around corners and say there's no tension! I'm missing something?
be sure to reach out to our Graphics team, they're the experts! graphics.averydennison.com
why is it so hard for regular people (non buisiness) people to buy avery wrap in europe
Hi there,
Thanks for reaching out and we're sorry to hear you've been having difficulty getting your hands on our products. To find a distributor near you, here is our 'find a distributor' link: avydn.co/2tDDBfz. If you have any other questions, please connect with our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
nice wrap technic but the color looks terrible
oliverwieter That car was used to promote a company brand name.
The audio is terrible
who cares