Check out MurdersFPV’s build of this quad too, slightly different but really nicely explained! ruclips.net/video/25gTVz6ocQ0/видео.htmlsi=Bq5VPi93EyItMxF3
Great video! I have the exact same build, except for the stack. Unfortunately, several of us have experienced an anomaly when recording in O4. This issue only appears after Gyroflow stabilization, where we sometimes notice slight vibrations in the footage. It's hard to reproduce since it occurs randomly during flights. There was never any issue with O3, but the O4 camera is more sensitive due to the larger sensor and is harder to set up properly. A good camera mount, tuning, motor PWM, etc., make a big difference. Please check if you experience anything similar.
I haven’t used any stabilisation on flights yet but I’ll put in an SD card and take a look this weekend. I actually had a similar issue with a few O3 units but it happened without any stabilization and gyro flow just made it worse (yes I tried all the fixes). I know the lite has been having big issues with that which is my next build
You probably don’t want to put the camera cable over the top of the fc because of interference with the gyro and the video. But do you cable tie it to the top plate?
@@MurdersFPV hmmm I must dig into this topic deeper then... but for about 1 year it was working just perfectly fine for me in djin 25 +o3 + tmotor f7 mini stack
It’s a little weird with it being that way round but it makes it easier to access the camera cable and antenna too so it’s helpful… just always looks like it should be mounted the other wat
I hope they will develope a SF35 for the O4 Pro which could be under 250g The Djinn (I put the O4 in mine to test it) is nice but i prefer to fly my SF35 Power to weight is much better.
@GarethDix yeah, I thought about it, but than I will be over 250g Also the picture quality for me isn't such a huge step to change from 10 O3s to O4 also I need to get UV / ND Filter for the OR cause, again the lens is fragile as f* So I decided to wait for innovation to come. The Djinn is only a innovation if you like the easy way to stay under 250g for everything else the SF35 is the better option
@philihc I actually prefer the SF3 sub250g. I love the SF35 at about 350g but then I’d have to be somewhere I can fly my SF5. The SF3 behaves more like a mini version of my SF5. The key difference of the djinn is the no props in view rather than the O4 option but unless I’m flying cinematic I don’t mind the props being there
@@GarethDix yeah forgot about the props, that's for those flying to record epic views, I don't mind. Hmm haven't flown my SF3 in a long time but never had the feeling to go back to it. Maybe it's the sweet spot for me. I fly it 4S 650mAh Tattu R-Line / 3800kV motors / HQProps 3525 249g O3 with an striped Air Unit. I can see that you will feel better with the extra 100g and maybe than 6S because hang time will be better
I’m sure someone will produce a mount for it (although the camera will stick out the front a lot). My brother upgraded the smart 35 to an O3 and that camera sticks out a little the O4 I’m guessing would have to mount in front of the carbon
Check out MurdersFPV’s build of this quad too, slightly different but really nicely explained! ruclips.net/video/25gTVz6ocQ0/видео.htmlsi=Bq5VPi93EyItMxF3
Great video! I have the exact same build, except for the stack. Unfortunately, several of us have experienced an anomaly when recording in O4. This issue only appears after Gyroflow stabilization, where we sometimes notice slight vibrations in the footage. It's hard to reproduce since it occurs randomly during flights.
There was never any issue with O3, but the O4 camera is more sensitive due to the larger sensor and is harder to set up properly. A good camera mount, tuning, motor PWM, etc., make a big difference.
Please check if you experience anything similar.
I haven’t used any stabilisation on flights yet but I’ll put in an SD card and take a look this weekend. I actually had a similar issue with a few O3 units but it happened without any stabilization and gyro flow just made it worse (yes I tried all the fixes). I know the lite has been having big issues with that which is my next build
One note - placing like this o4 camera cable will make it quite hard to swap o4 unit. I would suggest placing camera cable also just under top plate
You probably don’t want to put the camera cable over the top of the fc because of interference with the gyro and the video. But do you cable tie it to the top plate?
Terrible idea to put the camera cable anywhere near the FC
@@MurdersFPV hmmm I must dig into this topic deeper then... but for about 1 year it was working just perfectly fine for me in djin 25 +o3 + tmotor f7 mini stack
@@MurdersFPV Is the camera cable routing optimal under the ESC?
@gabesz_fpv absolutely, for less noise near the FC gyro and protection for the camera cable.
I just oedered the frame.
By the way the way you mounted the O4 Pro is the correct way. The flat side is actually the top.
It’s a little weird with it being that way round but it makes it easier to access the camera cable and antenna too so it’s helpful… just always looks like it should be mounted the other wat
It will cost me 20 dollars to copy it 😊
You should make a business
how much does this cost in total?
It’s about $195 (+shipping) for the Frame, motors, Rx and stack and then $250ish for the DJI O4
Hi, very nice video, thanks !!!
P.S. at 24:39 & 26:38 you say "grab the flight controller" but instead, you grab the ESC ;-)
Haha the amount of damn times I did that and had to redo the voiceover because of that I thought I got them all 🤦🏻♂️🤦🏻♂️
@@GarethDix 🤪
I hope they will develope a SF35 for the O4 Pro which could be under 250g
The Djinn (I put the O4 in mine to test it) is nice but i prefer to fly my SF35 Power to weight is much better.
So you can get a mount for the O4 camera for the current SF35 frame but it sticks out further. But apparently they’re working on it and the 5inch too
@GarethDix yeah, I thought about it, but than I will be over 250g
Also the picture quality for me isn't such a huge step to change from 10 O3s to O4
also I need to get UV / ND Filter for the OR cause, again the lens is fragile as f*
So I decided to wait for innovation to come.
The Djinn is only a innovation if you like the easy way to stay under 250g for everything else the SF35 is the better option
@philihc I actually prefer the SF3 sub250g. I love the SF35 at about 350g but then I’d have to be somewhere I can fly my SF5. The SF3 behaves more like a mini version of my SF5.
The key difference of the djinn is the no props in view rather than the O4 option but unless I’m flying cinematic I don’t mind the props being there
@@GarethDix yeah forgot about the props, that's for those flying to record epic views, I don't mind.
Hmm haven't flown my SF3 in a long time but never had the feeling to go back to it.
Maybe it's the sweet spot for me.
I fly it 4S 650mAh Tattu R-Line / 3800kV motors / HQProps 3525
249g O3 with an striped Air Unit.
I can see that you will feel better with the extra 100g and maybe than 6S because hang time will be better
I would like to upgrqde geprc smart 25 to dji o4 unit dunno if there is possibility
I’m sure someone will produce a mount for it (although the camera will stick out the front a lot). My brother upgraded the smart 35 to an O3 and that camera sticks out a little the O4 I’m guessing would have to mount in front of the carbon
70 bucks delivered. i don't think so
Welcome to how much stuff costs where I’m from no matter what you buy
its so sad that quadmula have political issues
Do they? What's going on there