Quadmula Djinn F25 SP + DJI O4: Build Tutorial // MurdersFPV
HTML-код
- Опубликовано: 9 фев 2025
- The Djinn F25 SP is an amazing 2.5" micro that can rip like a 5 inch! With a sleek design to work with the new DJI O4 air unit, your 4K footage will be unobstructed by the props or frame while maintaining the great flight characteristics that you expect from Quadmula.
Be sure to check out my Community Google Drive for all my Quadmula CLI dumps and 3D print STLs:
drive.google.c...
Pick up your own Djinn F25 SP here (affiliate link):
quadmula.com/p...
Betaflight 4.5.1
Quadmula Djinn F25 Split Frame
T-Motor Mini F7 FC
Foxeer Reaper F4 Mini 128K 45A 4in1 ESC
T-Motor F1404 2900KV Motors
TBS Tracer Nano RX
DJI O4 Air Unit
Gemfan 2540 Flash Tri-Blade Props / HQProp DT63MMX4 Quad-Blade Props
GNB HV 380mAh 90c 6s LiPos / GNB HV 650mAh 120c 6s LiPos
Edited in Adobe Premiere Pro
Follow me on social media!
linktr.ee/murd...
Inquiries for collaboration!
murders2020@gmail.com
#fpv #drone #build #tutorial #fpvfreestyle #dji #djifpv #quadmula #djinnf25sp #tmotorfpv #foxeer #teamblacksheep #gnblipos #betaflight
Quadmula has their own 3D print files available at this link from their website.
www.printables.com/@QUADMULA_373548
I’m loving that stubby mount! That cap that comes with the frame is so much easier to fit than the giant one I stuck in mine… I could have saved myself 30mins of trying to figure it out by just using the Quadmula one 😂
@GarethDix I did the same thing with my first Djinn build. This time, I just did what they recommended, and it was much easier. Lol 😅
@ my O3 version I had to mount it under the AIO… maybe I need to stop compensating with big caps 🤣
Just completed a Djinn F25 SP build with O4 Pro. Easily one of the most enjoyable builds I've done. Quadmula have knocked it out of the park with their design, can't wait to rip it! Thanks for the links to your CLI dump - really helpful starting point for the PID tune.
Came out so killer!
I know, it looks so fresh 😂
This is the only video on youtube that has most of the parts I just bought, thank you for the build guide 🤙
🐐back at it again with another great build. I’m modifying my f3 to fit the o4 pro and that combination is gunna be insane
Very nice tutorial. I just got into fpv and purchased my g3 goggles and a simple BNF to learn (spent 50 hours on sim). Thanks for these videos as they're a needle in a haystack! I will be using your affiliate link, and these videos when that time comes.
I have a feeling we will see a ton of destroyed 04 cameras with everyone trying to stuff the cam into existing frames. It looks like the 04 cam still protrudes quite a bit on the new SP frame. On my newest F35 build I remixed your 25 degree extended 03 camera mount to accept the 04 and it works great. To save some weight I used a 03 antenna and your stubby mount. Thank you for all your videos and turning me on to Quadmula.
@docktercolin I've been flying and crashing this a lot, and I have yet to damage the O4, but I'm sure it's coming. I have destroyed cameras in frames that offer even better camera protection. It just takes the right hit. The community usually finds a way to resolve these issue with their incredible 3D print designs. I am working on a design right now for the future 5" O4 Quadmula frames. This small drone is lightweight enough that the impact from a crash isn't enough to cause a ton of damage, but the 5" version will definitely need some more protection.
awesome work! thanks so much. i was looking for this.
Awesome my friend, I can't wait for the Djinn f25 Sp frame to arrive
Good timing. Just got mine in the mail!
cool build, thank you very much👍👍👍🙂🙂🙂
Perfect timing. Been googling like crazy for options for sub250 with o4 AU. Wanted to do it on a Djinn. Bingo. Ordered the frame, FC, ESC, Motors, and a BetaFPV ELRS Nano Receiver. Hyyyype!
Now need to find a good service to print those stl files
Mark is the best there is for 3D prints
facebook.com/share/17PA1NpuFf/
Nice video bro!
@@CasualFPV thanks, bro. These types of videos are legitimate labors of love.
Awesome Murders!! 😎🤙 just the video i wanted to see..Thanx bro!
tight build, bruh. Another DJI air unit, another build for me soon with this frame.
SICK BUILD BRO
beautiful build! 😃
Awesome video buddy, I’ve just had ago at putting 1504 xing motors on mine calling it my bipolar quad it’s got some mental kick now
Heavy duty heat shrink over that antenna works wonders
@Halphbaked210 true. I really appreciate the compact 3D printed mounts, but heat shrink is also an option.
Great video 👍
Nice build!! I've decided to wait for the right motors and not use the 3800kv motors that were available. the 6S batt will torch those motors I think.
@@JBOutside1 for sure. You could fly 4s. 🤷
@@MurdersFPV Good point. I considered that but already bought the 6S batteries for this one. Those 2900s are sold out everywhere here at the moment. But I found some on eBay...from China. Sooooo, some patience
Great video. I like how you made a shorter antenna mount for the 04 so they don't stick out as much and break not doing the flips n flops properly. Could you provide a download for that file?
"Used my eyes and actually found the file I was looking for in the video description!"
@vinivini661 Yeah, that Google Drive has a lot of good info
@@MurdersFPV Amazing thank you and Stew!!
As a newbie to fpv, I wanted to wait for O4 comp abilities. Therefore many thanks for your full tutorial and parts needed.
Only I question please:
Which ERLS receiver would you recommend? Will buy threw your links if you can provide one. Thx.
@SaintHanappi I don't have any affiliate links for one, but this is what I recommend.
pyrodrone.com/products/radiomaster-rp1-elrs-2-4ghz-nano-receiver-w-ufl-antenna
@MurdersFPV thank you!!! Thank you for your response and recommendation.
Is it possible to provide the print file for the short antenna attachment from your friend? :)
There is a link in the description to my Google Drive where you can find my STLs, CLI dumps, and ESC settings for my builds.
@@MurdersFPV awesome thanks
Waiting for the F5 O4 version
@@saturn_fpv its close
Me too! Will definitely grab a few SF5 Splits and Djinns SP to experiment
Quadmula straps are the best straps hands down. Change my mind you can't lol.
For the antenna. Heat up a exacto and send it done the antenna tube carefully and then it's easy peasy pulled apart. 😊
@josefdahari I thought of doing the exacto knife trick, but the last time I tried it, I cut myself 😅😭
Nice build. Just about to start mine. Do you have the double antenna stubby STL for the 25 sp? I can't see it in your files? Cheers.
drive.google.com/drive/folders/1mglfQMgq5yyIN7MoVuoN6j18q4KRNu3R
Thank you 👍@@MurdersFPV
Great video! Just ordered this frame.
Have only built a 65mm tiny whoop before, would you recommend this setup, or should I try and find a 5” frame as my first freestyle quad build?
@@jzl300z this 2.5" is honestly a great starting freestyle quad. It gets excellent video since it has an O4, it can do any trick a 5" can do, and it's small enough to not terrify people lol.
@@MurdersFPVgreat to hear! I know you used some parts you already owned, would you change anything? Was thinking of getting matching stack for example. Also need dji goggles 😂 Have HDZero now lol
Having a hard time sourcing the T-Motor F1404 in that 2900Kv. Plan on using 6S batteries too. Any other recommendations? Will keep looking in the meantime.
@jzl300z any 1404 motor with 2800-3000kv should world just fine.
Here is an example
www.racedayquads.com/products/flash-hobby-arthur-1404-3000kv-micro-motor-1-5mm-shaft?tw_source=google&tw_adid=&tw_campaign=20014426060&gad_source=1&gclid=Cj0KCQiA-5a9BhCBARIsACwMkJ6xf1Z-AQjNHcR4ZdEuxTfkO6dfj122l98MKf-79FonLu5S_LiyRzEaApOOEALw_wcB
@ thank you, going to look at those!
How is the Camera Protection. I saw some else say it was to exposed for an o4 frame?
@ChrisCroft77 it's been fine for me. I fly this quad a lot. It's pretty lightweight, so any damage is pretty minimal. Anyone who has been flying for a long time will tell you that there is no frame that offers protection in every situation. It only takes the right hit.
Which propellers do you recommend for this drone: 3 blade or 4 blade? Which ones will give more flight time?
@@xfarbxfarb the ones I mentioned in the description
I don't know why Korea blocks access to the Quadmula website.
May I know if there is a way to purchase Quadmula products in Korea?
@kogoonstorage76 I don't know either, and the only place to purchase Quadmula products is from their website.
So I just purchased the frame. Now i trying to figure out the best props to get I will be using 1404 4600kv on 4s. I noticed you have HQ 4 blade props in this build and GEMFAN 2540 in the previous flight video. What props would recommend?
Also it a pain currently trying to find 2.5 inch props in Australia at the moment.
@ChrisCroft77 I like using the 3 blade props when I use the smaller battery. I have 380mah GNB packs that keep the weight below 250g. When using larger packs, I prefer the 4 blade props.
@ ok. Other question will your tunes be ok on 4s?
@ChrisCroft77 should be
Hi Bro, could you please ask Quadmula why I can't purchase a Quadmula frame from my place (Indonesia) ?
@@FSAFPV has something to do with shipping. Either them not being allowed or it costs too much.
@@MurdersFPV Thanks for the info!
Any chance you could tell Quadmula they should team up with other FPV online stores? Like, maybe GetFPV, Banggood, or even Amazon?
Will the quadmula 3.5 inch arms fit this body?
@@chrisbee5481 no
Mula
mine did not come with them parts wow
@@sosdeathvalley which parts?
@@MurdersFPV the red parts they always put them in the frames but not this one ok i see
@@sosdeathvalley the red parts I printed myself. You can find all their STLs here at this link from their website. One of the things about the FPV hobby is how it comes along with several other hobbies like 3D printing, 3D design, and video editing. 😅
quadmula.com/pages/3d-print-file
How is your antenna mount working do you still get the full range with them now pointing straight out the back ?
@@Viseo3dp good enough haven't noticed a major difference
I was gonna order a frame, but then I realized it was gonna be $15 in shipping…
@andrewy3711 yeah, shipping ain't cheap. The DHL shipping gets to you in like 2 days. It's crazy.
suggest to order mutiple anyways!