PS5 Controller Not Charging .. Not Working Dialog DA9087
HTML-код
- Опубликовано: 4 фев 2025
- Customer sent PlayStation 5 controller not charging and not working at all , In this video I will try to change charging IC Chip Dialog DA9087
I hope you enjoy and if you want any questions please leave comment or contact me on Instagram Aynax.Tech
I Will Fix your devices :
Our Website :
aynaxtech.com/
Our store :
aynaxtech.com/...
Ask me Directly :
Facebook: AynaxTech
Instgram : Aynax.Tech
Or on our website : aynaxtech.com/...
Fix your device and contact us for more information
THANK YOU YOU ARE ONLY ONE WITH THIS VIDEO
Thank you for your comment, if you like my videos support me and make subscribe
The first video that I see someone replacing this chip, congrats!
In point of vision of manutention this fix is not viable because the price of the chip + workforce is too expensive here in Brazil, but I'm gonna save your video anyway!
Thank you for your comment, did you try to find this chip in Aliexpress?
I hope you can support me make like and subscribe 😉
@@AynaxTech1 already subscribed 🤘🏻
Yes, I find in AliExpress, but the cost of all it's too expensive, anyway I'll buy some only for tests
Thank you, following your video I changed it on my controller and it worked like a charm.
That great, happy for you
RIP my controller :( Thanks for letting me know not to charge with a phone charger though. I had no idea that I couldnt do that..
Sorry to hear that , anyway you learn something new
Great work my man :)
Hey, excellent work! I have a dualsense controller that only blinks orange 3 times. No signal given to ps5 or gamepad tester, and reset button did not fix it. It happened after resoldering a new potentiometer. Any thoughts on causes?
I think you put a lot of heating and damaged your ps5 board , I need to check and test
I have the same problem. Can you fix it?
@@WittawinPinprasert found the problem. Had a bit of solder toward the front bottom pf the board that wasn’t supposed to be there. Caused a short. When removed, the short was fixed and the controller powered on..but put so much heat into the joystick points that the board was damaged there. Had to scrap the board for parts
Now I can fix it. Found a problem with broken solder.@@angusfuzz
mine also flashes 3 times after replacing the stick and does not work anywhere to look
Liked and subscribed!!! Yes i charged my controller with the wrong cable and this exact thing happened to me 🤦♂️
wish, you can make a video of what brand tool you use.
Thanks.
I will try to make video in the future about my tools , thank you for your comment
Yes i too would love to know what it is you are using here too. I have a issue where my controlled when plugged in flashes orange rapidly. it still connects when plugged in to ps5 but disconnects immediately when using wireless. Would love to have a go and repairing myself. @@AynaxTech1
Ciao, sei bravissimo.
Thank you
This helped me come to the conclusion that while swapping to hall effect, apparently I melted a bit of the white plug for L triggers. Oopsies. Have you had any luck replacing those or should I start with a new mobo?
Thanks!
You can change them but you should have part for that
I’m still confused, how do you know which is a short or not?
Is there a number I should look out for?
Finally someone give a real answer
Thanks 😊
thank you ,great job!!!
Thank you 😊
I replaced the analog stick on my BDM-010 board with a Hall sensor. However, despite disconnecting all connectors, the R1 input continues to register. It seems like some solder may have splattered or some issue has occurred. How should I approach attempting to fix this?
I think you damaged capacitor near analog stick , i think right one
@@AynaxTech1
Thank you for your kind reply. I will try to find a way to fix it :)
Let me know if you want any help
@@AynaxTech1 I need help
The Stick Area controlls only Lstick/RStick and R3/L3 functions. If your Inputs don't respond, above near the L Stick is a Area with copperpins which is connected with the conductive flex foil and controlls your inputs. Clear both Areas wich IsoAlc, if nothing works change the flex foil or take it out and look for damages
Possible that cooking the pcb in an oven might work as a last attempt? Pcb seems dead anyways, not much to lose. 400°F too much? Too little?
no... don't do that.
Hi, I have a ps5 controller that doesn't charge neither is detected by console or pc. First thing wrong I noticed was a hot usb c port, so I tried changing it. After that I could play with the cable connected, but battery doesn't charge. I got myself more tools so I tried replacing again the usb c making a cleaner job, now I can't use ir even connected. When I connect the cable the orange light flashes two times, I test for voltage on the battery pins and I get nothing. Could I get any suggestions on what to check, I am trying to learn. Thank you.
I think the problem in USB port do you try to change it?
@@AynaxTech1 yes, I already changed it, today I realized voltage on the battery pins is present just when the battery is connected and I have voltage between red and black, about 4v. I am guessing maybe the chip in the video got damaged
@@AynaxTech1 but even when I have voltage on battery, it doesn't charge neither the controller is detected. It just blink two times orange when I insert the usb cable. Have any ideas? =$
Hi, it's happening the to me... the controller blink two times orange when I insert the USB cable. Have you already fixed the controller? Coud you help me please?@@dgr1209
I have same problem, but my chip is not hot or getting hot. Could this still be the issue?
Maybe the issue not in this area , do you have thermal camera to test if they have any hot area ?
What temperature did you use to remove the IC CHIP?
I used 420
@@AynaxTech1what I smoke🤣😂
@@AynaxTech1 420C° not F° right?
I changed the sticks to those with the Hall effect in several controllers. One of them worked for a few days and suddenly shut down. I watched your video and it seems that there is no shortcut and the chip is ok. The controller works via usb cable but shuts down when unplugged. I can check it with a gamepad tester and the pc app from sony shows it charging and has the current firmware. Also swapping in the battery from a working controller doesn't help. You seem to be very knowledgeable - could you please help me?
I never seen like this issue before but I think charging chip issue or try to return old orginal stick and test 🤔
I jak udało ci się dowiedzieć o co chodzi? Sam wymieniłem na hall effect i po tygodniu pad nie ładuje się i nie włącza.
Macha Allah great fix .
Thank you Bro
Controller works on cable, flashing yelow like its charging but not charge the battery, always zero. What you think?
Did you try first to change battery? Sometimes battery dead
@@AynaxTech1 I will try, i don't have a reserve battery currently 😁
I will do this step soon, but not without kepton tape, bcz of little conductors flying away😅 Can you tell me how much airflow and temp i need for this, pls? Thanx
Without Kapton tape they have plastic pieces so will damaged them
Anyway i used 420 temp and the air flow 40%
@@AynaxTech1 Kapton Tape is for absorbing heat from plastic parts, like lightbar connectors or fuses
my pad after replacing the new battery charges for 5 seconds and then a question mark pops up, what is the reason?
2:25 on what setting is multimeter on uhm dc?
Hello. The controller is charging but after a while a question mark appears. Sometimes it charges 1-2 bars, but when I remove the cable, it gives a low battery warning. The chip gets hot. I can use it with the cable connected. Do you think the problem is in the battery or the chip? Thanks.
Which chip exactly hot ? And did you try to replace battery
@@AynaxTech1 I tried the battery of the other gamepad. There seems to be no problem with the battery. The charging chip circuit is probably faulty. The chip that is heating is the charging chip. My chip code is DA9087 2028PVAG. Do you suggest I fix this? And how? I think when you insert a full battery, the charge drains quickly. I wonder if removing the chip and putting it back in would help?
Hey man :) Nice video! :) I bought a second hand Dualsense and it's working good but the battery can't hold any charge. When i'm charging it, it starts from one bar and it goes to full in like 20 mins. And the battery dies in 20 mins as well. What can it be? And thank you!
I think battery issue , did you try to change battery or test it ?
@@AynaxTech1 I did not yet :/ When i connect it to PS5 it's charging and in safe mode too. It's also charging on PC. I see some scrathes from the dock on the bottom. What else can i do to test it? Thanks
Hi could you help me , when im testing PCB like you the light is flashing but when i assembly controller back its not working not flashing ps button won't turn on my controller also its not charging
Yes sure I will try to help you, first did you try to test with game pad tester and see if your controller working ?
@@AynaxTech1 not yet is that pc app?
It is a website, test any controller
@@AynaxTech1 can you please advice which soldering iron to buy for beginners but not cheap one from Amazon i bought for 15£ kit and cant work after few uses its not heating properly , what i have seen a good branded one is expensive 150£ i dunno
Try to use Hakko fx888D or if you want cheaper try with Sugon a9
Hi. I changed the potenciometers, and my controller works fine. However the baterry is not charging. I already tested another battery and nothing. I think the problem is on the PCB. Do have any idea what it is?
Sorry to hear that , can you check your board if they some some short circuit?
Hi sir i have a question. I replaced the potentiometer on my controller right stick once i finished soldering it work but now my controller is not charging and does not turn on even if i try to put a different battery that is working. Please advise.😢
Can you connect to usb and test it through gamepad tester ?
Try to charge it with the chargestation, this should bring your da9087 to the right Voltage to controll and than try to charge per USB again
my controller only bling once in orange no work on ps5 , what can this be?
What does it mean when the controller flashes orange twice whenever you try to charge or start it? I replaced the joysticks with hall sensor switches. It worked for a while but it suddenly disconnected and stopped working.
have you found solution? i have exactly the same issue
@@mlekuu not yet. I'm planning to replace the switch to see if it'll help
Did you checked battery?
@@AynaxTech1 I ended up resoldering everything and the problem away but now the speaker won't work. I guess I must've installed the speaker wrong.
Please tell me the size of the nozzle
I used a regular size like small
Hi i just tried to put a gulikit in my controler and now i think its dead, if i send u my controler can u fix it leaving the gumikit modules and how much does it cost? Thanks
Yes you can send it can you please contact me through website, email or Instagram
Hello the middle rectangular shape part came while fixing my controller is way to fix and how
I think you mean speaker , you can buy another speaker if it's damaged
I have a BDM 030 controller with this same problem, and I have a BDM 010 donor board, could I put the BDM 010 processor into the 030 one? The serial number of 030 is "dialog da9087- 2248PVBR" and that of 010 is "dialog da9087- 2042PVAG. THANK YOU!!!
In my experience I think it's Not compatible but I hope I'm wrong , you can try and I hope get some good news
It's compatible, bcz same Voltage controll, in other cases when modding 010 there are dialog 9081/9083 build in. No worries, take the donor, only other IC Chips didn't be compatible
Dude im having this issue and im thinking its my dia chip as it to burns up when trying to charge it
Did you test components around this chip ?
@@AynaxTech1 it seems to be having the same shorts as yours does in the video, i couldn't find any schematics online so i want sure which components i was meant to test in reference to ground
Hi i have one that turn on by it self randombly , what can it be ?
I think you need to clean the start button, try that and if not fixable I can buy it from you
@@AynaxTech1 i see it in game pad tester and dont see any touch button
la temperatura del aria calda per saldare il chip ?
I used atten hot air station and 440 temp.
I licked the motherboard as a last resort and 10 minutes later it started working
I replaced it and still doesn't turn on
Is the short still on the board ?
@@AynaxTech1 yes
You need to use voltage injection to found the issue
Can you show me how ?
el mio no enciende ni carga
No Spanish sorry
tengo el mismo problema, lo solucionaste bro???
@@cxrlituz no, pero creo que es el chip SIE el que está muerto
How much is it to repair something like this?
For Repair service please contact me on website, email or Instagram