Thanks for that! I am a fellow pilot from germany about to be trained on 787 as well... your video is helpful to understand the flow. Better than just reading the handbook.
In the fix info u can put airport, vor,ndb, ils code and even waypoints there. When u put it in there it will show u on the ND screen highlights as a green color. It will give u distance from the fix to your aircraft also. In the video i put the airport code and the distance ring. For the 25nm i put that is for the MSA around the airport. It gives u the green distance ring on the ND. For long flights u also put the distance ring to determine the ETP, well that will depend on your flightplan. Hope it helps
@@manunitedphong thanks, I’m building a home simulator, would you know where I can find dimensions of panels? For example the MCP or EFIS panels …. Found lots for 737, nothing for 78
The efis on the 787 is modernized, all the page like status message, air, hydraulic, door etc is combine in one system page, u use the touchpad to scroll through it. It this what u look for?
@@manunitedphong thanks for the fast reply!! I’m looking for the width of the MCP in millimetres… I have the height at 88mm but can’t find the width anywhere. I’m hoping to find someone that has access and a tape measure ☺️
The FAA did not allow the 787 to have touchscreens for the FMC and MFDs when it was being developed in the mid 2000s as it simply wasn't good enough yet. It was supposed to be. They didn't have much choice but to include the trackpad and rotary knob. They also had to make the FMC virtual as the large lower screen (which displays lots of info and features) means there wasn't room to place the FMC on a physical CDU next to the pilot like on older aircraft.
@@manunitedphong I think it's about the safety. If we think about a pilot who drinks something on the cockpit. He/she can spill drink onto screens and this may cause a damage on flight control panels. A350 is newer but it doesn't have touch screens also. But i think they can solve this problem by using a pencil that can only interact with touch screens. Maybe this can prevent damages caused by something.
787 "pilots" aren't real pilots anymore. They are like operators, programmers. You don't need to know how to fly but you need to know how to operate plane.
That display makes it feel like you're programming a fmc in a simulator
Technology advances in funny ways
Thanks for that! I am a fellow pilot from germany about to be trained on 787 as well... your video is helpful to understand the flow. Better than just reading the handbook.
Excellent video, thank you!
Wow more videos please
Air india 787? Anyways am I the only one who uses the touchscreen?
So the Airshow Map takes all the data from the FMC?
Anh ơi cho em hỏi cách thức điều khiển của Sidestick và yoke có khác nhau không ạ
Cho em hỏi xíu là chi phí lúc anh học toàn bộ là bao nhiêu vậy ạ?
FMC B787 nhìn khá quá nhờ,không giống cái máy tính cầm tay nữa r
Hẹn gặp anh trên cùng frequency :)))
cool vid, just needs a swifter duster
Làm thêm nhiều video đi anh ơi, video FPS thì càng tuyệt 😍
Nguye nhan setup Route 2 de lam gi vay:
Dep: VVNB (Noi Bai)
Dest: VVNB (Noi Bai) ???
Chris Truong set route 2 để trường hợp khẩn cấp đó bác
@@manunitedphong ahh ... truong hop khan cap sau khi take-off va neu muon tro ve lai Noi Bai ??
2:22
What do you write on the FIX INFO page?
I would appreciate it if you could explain it a little easier
In the fix info u can put airport, vor,ndb, ils code and even waypoints there. When u put it in there it will show u on the ND screen highlights as a green color. It will give u distance from the fix to your aircraft also.
In the video i put the airport code and the distance ring. For the 25nm i put that is for the MSA around the airport. It gives u the green distance ring on the ND.
For long flights u also put the distance ring to determine the ETP, well that will depend on your flightplan.
Hope it helps
@@manunitedphong i understand. thank you
@@manunitedphong
So are there times when you don't use the FIX INFO page during actual flight?
@@DREAMLN-ER yep, the fix info is just giving u the reference point.
thanks P
Chuyển loại từ 321 sang 787 khó ko anh
Béo Travels khó đó em ạ, 2 dòng khác nhau nên phải mất tg mới thành thục đc
Do the pilots and copilots controls for the shared display work independently, does it behave like two separate display screens?
Yes it does
@@manunitedphong thanks, I’m building a home simulator, would you know where I can find dimensions of panels? For example the MCP or EFIS panels …. Found lots for 737, nothing for 78
@@ZX7ROB good to hear that, i never build a home cockpit so i’m not sure about that, but the 787 is similar to 777 so i think u can try to look for it
do you normally request company flight plan?
or PERF INIT request and winds..or you put it manually
All manually my friend
Do you know how wide the Mcp is not including the Efis panels?
The efis on the 787 is modernized, all the page like status message, air, hydraulic, door etc is combine in one system page, u use the touchpad to scroll through it. It this what u look for?
@@manunitedphong thanks for the fast reply!! I’m looking for the width of the MCP in millimetres… I have the height at 88mm but can’t find the width anywhere. I’m hoping to find someone that has access and a tape measure ☺️
@@ZX7ROB i see, u can try to look for some home cockpit project, lots of people building on their own
this display is the worst user interface boeing has done. At the very least make it a touch screen!
The FAA did not allow the 787 to have touchscreens for the FMC and MFDs when it was being developed in the mid 2000s as it simply wasn't good enough yet. It was supposed to be. They didn't have much choice but to include the trackpad and rotary knob. They also had to make the FMC virtual as the large lower screen (which displays lots of info and features) means there wasn't room to place the FMC on a physical CDU next to the pilot like on older aircraft.
Nhìn rối quá. Trong quá trình huấn luyện được dạy về cách nhập luôn đúng không ạ?
Ừm em ui
What airline do you fly for?
He works for Vietnam Airlines.
You are in 787 pilot now?
CptVinzane yep
manunitedphong wow. From A321 to 787. Congrats on the upgrade sir
CptVinzane thanks for your support
manunitedphong Can you explain how you became a pilot and how did you pay for flight school ?
I thought it's a touch screen in my entire life come oon😅
In the future it will be, this aircraft technology was back in 2007 so it still comes with the touchpad
@@manunitedphong I think it's about the safety. If we think about a pilot who drinks something on the cockpit. He/she can spill drink onto screens and this may cause a damage on flight control panels. A350 is newer but it doesn't have touch screens also. But i think they can solve this problem by using a pencil that can only interact with touch screens. Maybe this can prevent damages caused by something.
no ETP page like airbus?
Yep, but we use Fix info page to create ETP by using range ring
@@manunitedphong thanks
I don’t think it’s right loading star before departure
For the new tech cdu, is fine to do it my friend
Nhìn đã quá ạ:>
Anh lái 787 a350 và cả a321 luôn hay sao vậy :v
Giờ main là 787 em ui, 2 loại kia anh ko bay
@@manunitedphong ghê thế
@@user-ie9wh6lj8t you are.
Uh Oh FD Door Lock Fail can't be good
787 "pilots" aren't real pilots anymore.
They are like operators, programmers.
You don't need to know how to fly but you need to know how to operate plane.