DS18 FR6000.1 Amp Dyno Testing Droppin HZ Car Audio

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024
  • Check out the DS18 Full Range 6000.1 Amplifier on our Amp Dyno.

Комментарии • 77

  • @TruenorthmtGod
    @TruenorthmtGod 5 месяцев назад

    I have their 8 inch high excursion subs. 4 of them in a ported box under 24 trailboss back seat hooked up to a 5k taramps amp with gains turn😢down. Best lows I’ve ever had. Been doing this for 30 years.

  • @wal
    @wal 8 лет назад +15

    I've seen that phenomenon with some amps as well. It is not the Dyno, I test full range amps all the time and have only seen this happen a couple of times. I'm sure this has been asked before, but why full range on a 6kW amp?

    • @mdrawdy1
      @mdrawdy1 8 лет назад +2

      +Dereck BigDWiz DS18 is a mexican company and they use it to power walls of door speakers

    • @cuzimaluzer777
      @cuzimaluzer777 8 лет назад

      +Dereck BigDWiz got mids?

    • @eonwagoneer
      @eonwagoneer 8 лет назад +1

      +Michael Drawdy they are from miami, but yeah, for mobile pa type cars, not cars to listen to from the inside

    • @mattwells1036
      @mattwells1036 8 лет назад

      I feel like it has something to do with the distortion light being on the whole test, maybe it's not reading it but still going up, untill it reaches a point where there's low enough distortion, idk how it usually works, I've seen plenty of amp dyno tests with that thing and don't remember seeing it's distortion light till the very end

    • @quez76
      @quez76 8 лет назад

      why not full range?

  • @jddd8749
    @jddd8749 5 лет назад +4

    Hey man I think you're having that problem where it shows you that the dyno is not climbing steadily because you're setting at a thousand Hertz try a different Hertz setting and it should perform correctly

  • @CausinTraumaBradley
    @CausinTraumaBradley 5 лет назад +3

    It will handle 15.9 and run at
    .5 also. I run mins and 15.8 -16 at .5 idk how much power im.m getting on vocals but i just blew them a day before a show. I may need THE EXL LINE OF VOCALS NEXT

  • @Tony2Pockets
    @Tony2Pockets 8 лет назад +8

    ok i like that interesting now lets see the Orion HCCA 8k on the dyno

  • @MOBAudioUSA
    @MOBAudioUSA 5 лет назад +3

    Any way to see it doing the 40hz test?

  • @alphaomega8373
    @alphaomega8373 7 лет назад +5

    Total agree about the brazilian amp I'd never trust those amps. Thank you for showing DS18 products. I bought the eq and and the crossover from them. The crossover is the best I ever used. Retire the AudioControl 6XS for the DS18 XM6LD. The EQ was good but didnt stand out like the crossover.

  • @raphaelbarrosdesa8936
    @raphaelbarrosdesa8936 3 года назад +1

    Funny enough the BRAZILIANS are making the best value amps now days, whole americas are using them, all over youtube too... Brazilians, we all know what is the deal out there... Taramps all the way!!

  • @bigdaddynate8917
    @bigdaddynate8917 8 лет назад +2

    it will easily do what it says its just he is using 12volts so the test will represent the car being off if he was to use 14volts it would get what it says + some

  • @stankinsteinfrankfurter9005
    @stankinsteinfrankfurter9005 5 лет назад +1

    @12.3, 12.4 volts gad damn that's some powa!!!!

  • @girtsdauka7451
    @girtsdauka7451 2 года назад

    i have few of ds18 amps , maded after 2015 those all brilliant power and quite decent ,does all ratings ,best on dynamic those

  • @jddd8749
    @jddd8749 5 лет назад

    You're Dyno counted up smoothly on several tests I know you didn't want to so I would go so far as to say something's up with your Dyno or something's up with the amplifier your testing!!!

  • @Tomcatjr442
    @Tomcatjr442 6 лет назад +2

    Id like to see the cxa1800 kicker

  • @justinsmith1617
    @justinsmith1617 6 лет назад +3

    what does it do at 40hz?

  • @pastorastor3668
    @pastorastor3668 5 лет назад +1

    Why Korean over Brazilian ? Are you saying Taramps are'nt any good?

  • @666hobart
    @666hobart 8 лет назад +1

    Kind sir Could we get the numbers from the dynamic run?

  • @colewoodruff5214
    @colewoodruff5214 6 лет назад +4

    Can I use this amp for subs or is it just for mids?

    • @rmblwgn
      @rmblwgn 4 года назад

      Its full range! Just use the appropriate crossover box on your speakers

    • @samuelrodriguez3826
      @samuelrodriguez3826 3 года назад +1

      It’s a amp for subs 6000.1 ! The .1 means single channel! Lol .2 for 2 channels & etc

  • @mikeboz4444
    @mikeboz4444 6 лет назад +4

    Try the 9k :)

  • @Lyfe0125
    @Lyfe0125 8 лет назад +3

    can u do a lanzar opti2000d

  • @Jeffdachefz
    @Jeffdachefz 7 лет назад

    Think you can get your hands on the taramps new US version and dyno it? Like a bass 12k or hd 15k. It should be far ahead of others in terms of technological advances for subwoofer duty.

  • @LintPockets
    @LintPockets 8 лет назад +2

    hello was trying to find any dyno's on the ppi black ice 7k or even the 5k wondering if they do rated? also have you tested any Taramps? may i ask why Korean over Brazilian ?

    • @SilkySmooth02
      @SilkySmooth02 8 лет назад +1

      me too, they are .5 ohm stable. I just wonder if they do rated.

  • @bassheadnord8771
    @bassheadnord8771 8 лет назад +1

    what is about 0.5ohm

  • @nathanielbolden5053
    @nathanielbolden5053 5 лет назад +4

    GOTDAMMIT I'VE NEVER HEARD OF A 4000 WATT FULL RANGE AMP!

  • @Djmambo77
    @Djmambo77 8 лет назад +1

    can you do a lanzar opti? any one of them

  • @jddd8749
    @jddd8749 5 лет назад

    You may even want to have your Dyno checked out there may be something going on with your Dyno because it should move up smoothly on 1 kilohertz test

  • @eturnulrs704
    @eturnulrs704 7 лет назад

    just wondering if it were possible to test the jl audio hd740/1 or the hd600/4

  • @pogodafreeride
    @pogodafreeride 5 лет назад +3

    Quick question sir, I can get this amp for decent price. Now my q is, would it do well as daily for subwoofers ?

  • @eliezerbrito301
    @eliezerbrito301 7 лет назад +1

    how much at 2 ohms?

  • @27marrio
    @27marrio 8 лет назад

    cool review. is there any way you could test the FSD fz5000d. true subscriber and fan here.

    • @adamneill9237
      @adamneill9237 8 лет назад

      That amp does rated power @ 1 ohm (14.4V) Saw one do 3.9k at 1.6 ohm after rise & drop to 12.6V

  • @samuelrodriguez3826
    @samuelrodriguez3826 3 года назад

    Why do 1000 hz on a D class mono block amp ? Why not 40 or 50 hz?

  • @alfa7108
    @alfa7108 6 лет назад

    can you Dyno the new lanzars ctv that claims 6000 watts? I think that's what it's called. it's around 21 inches long

  • @ryanrambhajan3191
    @ryanrambhajan3191 8 лет назад +5

    please do a ds18 ds6000.1

  • @hitzigg88
    @hitzigg88 5 лет назад +1

    Your Dyno is messed up or something cause I've personally seen that amp Dyno at 7300+ rms on 2 different dynos

    • @jcruz2010
      @jcruz2010 5 лет назад

      hitzigg88 where?

    • @Repny2dafullest813
      @Repny2dafullest813 4 года назад

      No, you cant compare a uncertified test with a dynamic test.

  • @treiber671988
    @treiber671988 7 лет назад +5

    I'm curious why does someone need 4700rms full range?

    • @huntercobb9881
      @huntercobb9881 6 лет назад +1

      300 club they power like 50 mids and highs on one amp when your system is a semi trailer that opens or w.e you need a lot o power

    • @treiber671988
      @treiber671988 6 лет назад +1

      Hunter Cobb maybe I'll just get one for my truck. Beats running three mids and highs amps. I thought 180rms was tomuch

    • @LuisMartinez-oz8jq
      @LuisMartinez-oz8jq 3 года назад

      I power 6 10" mid high ds18 with a ds18 4 channel 5k full range

  • @ranks33
    @ranks33 8 лет назад

    what about in bridge mode

  • @edycalderon1282
    @edycalderon1282 7 лет назад

    Nice Numbers

  • @joesperformance
    @joesperformance 5 лет назад

    Wish someone would Dyno the DS18 candy-x1b

  • @timwilcox69
    @timwilcox69 3 года назад

    40hz please

  • @bahmanrasoli1387
    @bahmanrasoli1387 5 лет назад

    12.4volt

  • @allaboutbeats882
    @allaboutbeats882 8 лет назад

    does it go 1hz ?????

  • @seansmith4440
    @seansmith4440 4 года назад

    1khz? Whoa there. Try 40hz

  • @LintPockets
    @LintPockets 8 лет назад

    be nice to find out the facts .

  • @eliezerbrito301
    @eliezerbrito301 7 лет назад

    please

  • @BenaresDarkness
    @BenaresDarkness 6 лет назад +1

    that's stupid you need to show dynamic mode before you say it doesn't make its power

  • @shaunowens9601
    @shaunowens9601 8 лет назад

    They are junk.. test the powerbass xta5000d

    • @jacobmiller785
      @jacobmiller785 7 лет назад

      team it hertz they're junk, but it did rated power lol. BTW i have 2 xta5000s if your interested

    • @shaunowens9601
      @shaunowens9601 7 лет назад

      Jacob Miller how much for both of them?

    • @jacobmiller785
      @jacobmiller785 7 лет назад

      team it hertz $400 plus shipping. Both need repaired. One is almost finished. It needed a couple fets. I had most of them replaced but it never finished

    • @shaunowens9601
      @shaunowens9601 7 лет назад

      Jacob Miller i call tomorrow to get it set up..

    • @jacobmiller785
      @jacobmiller785 7 лет назад

      team it hertz get what set up?