I am actually having that issue with the worn detent ring on my Keymo adapter so this was very informative. I will be emailing Dead Air to address this. Thanks for uploading this video. 👍
Same here, they said they’re out of stock on detent rings but will ship one out asap, got a durable suppressor but I guess the keymo part is something that will fail much sooner?
I found that using Permatex Purple Ceramic Extreme brake lube is the absolute best for the adapters. It's rated to 3000F, slick as hell, wont corrode and doesn't wash out at those rainy day comps
@@acidicfate You're talking about the threads being exposed @ 1:58 right? When he's taking off the 3 parts? Not the threads that go into the can itself? Thanks!
I shot my Nomad on an AR10 type rifle for nearly 200 rounds and neither the suppressor or KeyMo adapter came loose. Awesome mount and considered by many to be the best in the industry! 😁👍
@@timowens7214 I efiled a Form 4 for a YHM Turbo K. It's been 146 days so far. Looks like it's been taking about 7 months or so for most eforms to get approved. 😒
From what I’ve read it’s the ‘detent’ rings wearing down that makes it stop the ratcheting sound. Apparently it’s still reliable but not cool because I want that sound!
Was having trouble with the ratchet only going one notch or not at all. Took it all apart, swapped spring/washer/nut with my other mount and just kept working them on and off. Was getting frustrated and figured the whole mech needed a break in. It finally worked out. Then I saw this vid lol
My nomad30 keeps coming loose from the 5/8-24 adapter… while shooting it on my SCAR17, I don’t want to put any Loctite on the threads, but is that what y’all would suggest?
Fyi. Followed this vid instructions. My Sierra 5 still seized after 260rds at the range. I used Blaster Penetrating catalyst and it came off just like the video. Before the BP, it wouldn’t budge with a 10in crescent wrench. I thought my pinned flash hider was going to break. F- Keymo.
I shot my new Nomad suppressor I waited 11 months for. Put it on the gun and zeroed my scope with it on. Road out to the deer stand and noticed my end cap was missing. Had to take the dang thing off and hunt without it. $55.00 later and good as new. Wait, it was new when it end cap fell off. But the Keymo worked, well until it got hot and I couldn't get the suppressor clickty clackty. Wished I would have watched this video of "TIPS" firsts.
You can continue to use the silencer without the clicks as long as it is tightened down, but send us an email to info@deadairsilencers.com and we can get a new piece sent out to you.
@@DeadAirSilencers specific model? I have a Nomad 30 in NFA jail. Just got a muzzle device for my AR, I didn't know you guys had muzzle devices for AKs, other than the Wolverine
@@wildbill7065 I ordered my Sierra 5 on May 28th from a kiosk for SilencerShop. Got my DocuSign notification on the 10th of this month. I now have the serial number so the wait starts
Y’all lame I was in a live video and was called out for some dope ass swag and you cookies never sent it #fakeAF I should of paid for sure fire can honestly
any day my sandman will be free...
Hang in there! Got mine this week, submitted my form in April.
Lol same
i got like 7 months left😭😭
11 months here.
@@yz250jimmine was 11 months to the day. Biden is telling atf to slow up.
I am actually having that issue with the worn detent ring on my Keymo adapter so this was very informative. I will be emailing Dead Air to address this. Thanks for uploading this video. 👍
Same here, they said they’re out of stock on detent rings but will ship one out asap, got a durable suppressor but I guess the keymo part is something that will fail much sooner?
They’ll take care of you. I had the same wear problem and they made it right as soon as they got some in stock
I did not realize this was necessary, I have just been throwing them on and they have been great on 5.56 and 300Blk, great stuff
Yea same with me, I immediately got worried after seeing the title of this video. Im like oh F I haven’t done any of this
I found that using Permatex Purple Ceramic Extreme brake lube is the absolute best for the adapters.
It's rated to 3000F, slick as hell, wont corrode and doesn't wash out at those rainy day comps
do you put this on the threads of the hub adapter or just the detent ring?
@@Eastbaydxt Just the threads
@@acidicfate You're talking about the threads being exposed @ 1:58 right? When he's taking off the 3 parts? Not the threads that go into the can itself? Thanks!
I shot my Nomad on an AR10 type rifle for nearly 200 rounds and neither the suppressor or KeyMo adapter came loose. Awesome mount and considered by many to be the best in the industry! 😁👍
I'm waiting on a nomad L
@@timowens7214 Sweet! How long you been waiting?
@@juncho1977 e form 4 traditional trust.
87 since purchased
66 since certified
I have a good wait still unfortunately 😒
@@timowens7214 I efiled a Form 4 for a YHM Turbo K. It's been 146 days so far. Looks like it's been taking about 7 months or so for most eforms to get approved. 😒
@@juncho1977 try 8 months...I'm a 3/19 and yet to get my cans...
mines no longer makes the ratchet sound and would get a loose, I lubed it and It tightens just fine but still not ratchet sound.
From what I’ve read it’s the ‘detent’ rings wearing down that makes it stop the ratcheting sound. Apparently it’s still reliable but not cool because I want that sound!
Can’t wait to get my sierra 5
Got one coming with my Sierra 5, for my 13.7 Quantom Mk2 can’t wait!
Was having trouble with the ratchet only going one notch or not at all. Took it all apart, swapped spring/washer/nut with my other mount and just kept working them on and off. Was getting frustrated and figured the whole mech needed a break in. It finally worked out. Then I saw this vid lol
Great product so far.... I actually just did an install video for the Keymo on my .300 blackout... Thanks for sharing.
Good info. Hopefully people will watch and stop detonating their cans now
Good to know info. If I spit on it does that count as lube? Jkjk
My nomad30 keeps coming loose from the 5/8-24 adapter… while shooting it on my SCAR17, I don’t want to put any Loctite on the threads, but is that what y’all would suggest?
Rockset bubba
Just got mine today after 114 days
Appreciate the input. Still waiting on sandman s FDE to put on mk18, can’t wait
Why do you not include shims anymore with your flash hiders? Also why don't you include Rocksett? Kind of slack considering Surefire does...
Fyi. Followed this vid instructions. My Sierra 5 still seized after 260rds at the range. I used Blaster Penetrating catalyst and it came off just like the video. Before the BP, it wouldn’t budge with a 10in crescent wrench. I thought my pinned flash hider was going to break. F- Keymo.
Y'all need to start making adapters in M16x1 LH, 5/8-32, 11/16-24 or other less common thread pitches,.
I shot my new Nomad suppressor I waited 11 months for. Put it on the gun and zeroed my scope with it on. Road out to the deer stand and noticed my end cap was missing. Had to take the dang thing off and hunt without it. $55.00 later and good as new. Wait, it was new when it end cap fell off. But the Keymo worked, well until it got hot and I couldn't get the suppressor clickty clackty. Wished I would have watched this video of "TIPS" firsts.
What kind of grease? Will gun butter work?
Yes, Gunbutter will work fine.
You’re supposed to break in the keymo? Haha… oops…??
Do you put lube all over the ring or just where the teeth are?
Sandman-S FDE was my first choice, gotta say it's a solid performer and sexy piece of kit.
Mine no longer makes a clicking sound. The tiny little tabs have worn down....
You can continue to use the silencer without the clicks as long as it is tightened down, but send us an email to info@deadairsilencers.com and we can get a new piece sent out to you.
My sandman never made a ratchet sound since I’ve had it.
Mine too but I also haven't had any issues with it coming loose and I've put it on my .300blk, .308, and .556 with no issues
@@notapewpewexpert1630 I also got my fde sandman later and it ratchets fine
But I’ve had no problem with lockup
My shit broke bruh
Anyone know what kind of muzzle device is on the AK in the beginning?
That's a KeyMo flash hider.
@@DeadAirSilencers specific model?
I have a Nomad 30 in NFA jail. Just got a muzzle device for my AR, I didn't know you guys had muzzle devices for AKs, other than the Wolverine
I didn't know the Keymo required maintenance.
Everything requires maintenance lol.
@@mattbowen1439 direct thread doesn't require shit
@@newerest1 but it does. It has threads? It also requires making sure the can is on securely. 🤡
Threads can gall or come loose. Reason we have Aeroshell and Vibra-tite
@@xSP3CTREx direct thread is lame and you constantly have to take muzzle devices on and off.
30 cal can on an ak? Brave
I love dead air
Great info Tass!
Thanks guys, can't wait for my Sierra 5 to get out of jail!
I wish I was there. Mine is still on trial (backordered)
@@wildbill7065 yeah I hear you, i had to buy a demo Sierra 5 to get the efile going asap! Still paid full price.
@@wildbill7065 I ordered my Sierra 5 on May 28th from a kiosk for SilencerShop. Got my DocuSign notification on the 10th of this month. I now have the serial number so the wait starts
So what Grease was using?
Use white lithium grease
Am I weird for thinking you shouldn’t have to break in the mount 🤣🤣🤣 dual-lok FTW
No sound?
you need to pay the $200 nfa tax stamp first.
I found the best way is to remove it from the barrel, throw that lead weight in the trash and put a Rearden mount on.
Id rather twist on a piece of shit that use a rearden mount
Y’all lame I was in a live video and was called out for some dope ass swag and you cookies never sent it #fakeAF I should of paid for sure fire can honestly