Это видео недоступно.
Сожалеем об этом.
Making custom washes using ink
HTML-код
- Опубликовано: 25 апр 2021
- #Painting #SaveMoney #ScaleModelling
Today at Badgerworks, while painting a miniature, I found myself in need of a specific wash that I didn't have, so I used a method I learned from Luke over at @GeekGamingScenics to make the very thing I needed...
Please consider supporting me on Patreon - / steamgeezer
Facebook - / steamgeezer
Instagram - / steamgeezer
Twitter - / steamgeezer
Join the Staff Canteen and share your projects! - / badgerworks
Music:
Theme - SteamGeezer Shuffle - Agricultural Light & Magic
In-episode - mcmrecords
Affiliate links (tools and materials that let you help support the channel at no extra cost to you)
I'll add to this list as time goes on.
Please note I buy all of my own tools and materials and all opinions are my own. I use everything in this list. You may find these items cheaper from other vendors, the links are for reference - it pays to shop around.
3D printing:
Elegoo Mars Pro - amzn.to/399EkL7
Elegoo ABS-like grey resin - amzn.to/30rIeLb
3.7v Miniature Smoke Machine parts:
RX2008 box - amzn.to/2KSIAUO
Vape coil set with wicks - amzn.to/2U1g9Xw
20A 18650 battery (x2) - amzn.to/33ZvVab
5v 25mm fan (x5) - amzn.to/2ZcEbEZ
Please note that these items are only for guidance. You will need to ensure whatever parts you buy are suitable for the project you have in mind. Also keep in mind that, if misused or abused, a smoke machine may melt or even catch fire.
Modeling and general tools and supplies:
Harder & Steenbeck Evolution - amzn.to/2JiPaV2
Trigger Airbrush - amzn.to/2E4GL3m
Starter Airbrush Kit - amzn.to/2Vmavyf
1/8"BSP Airbrush quick release kit - amzn.to/2JF27Ys
Airbrush connector adaptor kit - amzn.to/2VzoK7O
Pro Arte miniature brush set - amzn.to/2Jhm4W1
Archimedes Drill - amzn.to/2XC7Ou5
Air Wick Wax Burner - amzn.to/2Dntm5N
Motor pack - amzn.to/2HNRCBV
Vallejo Airbrush Thinner - amzn.to/2JEyCGu
Vallejo Matt Polyurethane Varnish - amzn.to/2Vojhfk
3ml pipettes (200) - amzn.to/2JD5OOs
3M vinyl masking tape - amzn.to/2JCEbVH
Silicone pickup tool - amzn.to/2Mycn81
Circle template - amzn.to/2WPSskI
Trumpeter large photoetch break (bending tool) - amzn.to/2yHtYRk
Graphite pencils - amzn.to/2Ilk11n
5v TP4056 charging circuit (5 pack) - amzn.to/2X4wW0x
3.7v 160mah lithium polymer battery - amzn.to/2X1rzze
SMD5050 LED (100 pack) - amzn.to/2NaOx2C
5v Relay board (x5) - amzn.to/2TZzY1m
Pololu 6 channel servo controller - amzn.to/2ZtKEGB
SG90 servo (x5) - amzn.to/340eOEU
Solder Sucker - amzn.to/2ZYKpna
Tobar Smart Putty - amzn.to/2AslbTT
Anti-static tweezer set - amzn.to/2mg1HxW
I watched this via Patreon on my phone and I've just watched it cast to my TV. The detail really shows up well on the TV.
I'm glad to hear it. It's shot in 1080p so it should work on TV. I'm actually surprised how many people watch youtube on TV, but it's pretty much replaced traditional TV for a lot of people.
@@SteamGeezerUK I watch all my RUclips channels on TV. Much better than on my phone, which is a decent one. Look forward to your next. Maybe you could do a short one of all the "Stop laughing at the back" moments.
I can’t wait to watch this tutorial
I hope you enjoy it ;-)
“Stop laughing at the back” 😂😂
Ladels and Jellyspoons... Best intro ever
Many thanks TCB
Thanks for watching ;-)
Looks really good can’t wait for the next episode.
Thanks, I appreciate it :-)
Ink is superb stuff, I have pre mixed bottles of medium and water and actually "paint" with it over a zenithal undercoat. Unfortunately there is no standard mix ratio as each in has a different colour density.
Very true. Off camera I made another pot using burnt umber ink and I had to put about ten times the amount of ink in that one.
Nice!
Thanks :-)
get some dropper bottles as it saves you then having to use pipettes to get the stuff onto a pallette or the airbrush.
Yes, but then I have to wash them out, and I'm lazy like that, as you well know :-)
@@SteamGeezerUK dont wash them out just reuse them and put more of the same wash into them
Matt medium: check
Deionised water: check
Dish water: check
......
Hey, you can't change ingredients like that!
Shush, you... :-)
Have you tried Fiebling's Leather Dye, Black, to make a dark grey stain/wash. Mix 30ml of dye with 473ml of Isopropyl Alcohol. Mkes a fab grey stain. Try it out, if you can, and see how you get on. Mike
I have some of that (I do a fair bit of leatherwork too). I might just give that a go, cheers.
A bit late to the party but thank you.
If I need to repaint it, I can use model remover. Is it possible to wash away the paint that was applied?
I'm very sorry, but I'm not sure I understand the question. If you're asking if it's possible to remove the wash once it's dried, I'd say probably not, although you might be able to with isopropyl alcohol, but you then might remove the layers underneath as well.
@@SteamGeezerUK You got it right. Yes, I mean remove all the paint from the model including the wash. Sorry for my strange language. I can read but can't compose English sentences. So I have to use Google to help communicate with you.