Building A Lugworm Bait Pump Simple and Easy

Building A Lugworm Bait Pump Simple and Easy. Lugworm Bait Pump Built from 22mm spare plumbing parts in my shed and also homemade seals for the bait pumps. These pumps are simple to build and effective and have proven to work also cheap to build your self
Bait pump build Parts
22mm copper pipe
22mm equal tee
8mm stainless rod
fuel pipe tubing to fit 8mm rod
6mm nylon top cap with 10mm hole for shaft
cut from nylon chopping board seems hard wearing
18mm stainless washers x2
19 silicone seal these can be bought on ebay
make your self homemade seals • How to make 22mm homem...
and a m10 stainless nut
HAPPY BUILDING

[@KD-KayakDanglerUK]

Amazing video thank you, I am definitely going to try and make one thanks 👌🏼

[@hastingsangler]

Thank you for watching and good luck with you bait pump build👍👍

[@richardjones2811]

Looks simple apart from the main shaft, that's the difficult piece to make.

[@hastingsangler]

hi richard i make all my shafts with a m6 thread like you said the rest is easy the washers very important too the pumps dont need no liquid just wet sand

[@SaltwaterAngler]

Good instruction , am giving this a try thanks for the info. Medium sized hands lol

[@hastingsangler]

Hi Matt when that warms up a bit and longer tides we need get out and have a go save yor self some money lol😬

[@brianpask8955]

Good video Dave. Looks like I will have to rebuild my old one now I know what to do.

[@hastingsangler]

Hi brian pop it in to les down the club il fix it for you

[@Andysfishon]

Great video bud.👍🏻👍🏻

[@hastingsangler]

Cheers Andy tight lines🎣🎣

[@Richard-ip1dj]

What is the rod. Enjoy your videos.ta

[@hastingsangler]

Hi Richard I use 304 8mm stainless steel rods hope that helps

[@romangasior4046]

👍👍👍👍👍👍👍👍

[@hastingsangler]

Cheers👍

[@bigyjeep]

great video, how did you put the thread on the end of the shaft

[@hastingsangler]

Hi because i don't have a tap and dye set ive got a friend that welds a m6 bolt on the end then grind the weld down to size of the shaft bit of cheating

[@g.w.3816]

A beginner question for you, can you pump bait when it’s raining?

[@hastingsangler]

Hi yes you can but its a lot harder as the sand coils get washed away but you can still see where the cast was as soon as the rain stops the pop straight back up

[@g.w.3816]

@@hastingsangler thank you for your reply, il give it a go next week then

[@hastingsangler]

I'm digging next week some nice big tides just bad weather good luck

[@johnullrich4191]

Hi do you make pumps to order thanks

[@hastingsangler]

Hi John I do copper or stainless pumps

[@gonefishing5142]

I can't find a source for M8 stainless washers that are 18mm diameter? Will M8 x 16mm diameter do?

[@hastingsangler]

Hi i use these M6 X 18mm A2 STAINLESS STEEL PENNY REPAIR WASHERS MUDGUARD WASHER (pack of 20) on ebay good luck

[@gonefishing5142]

@@hastingsangler Thanks mate! :)

[@lookeyboi9396]

How long should the stainless rod be

[@hastingsangler]

Hi all depends if your tall or short but a standard size 1.1meters long that from the handle to the end

[@Love_Fishing.]

So how much for you to make one for me ?

[@hastingsangler]

Hi Thank you for asking but i don't sell them to much hassle if you lived local to hasting's i would make you 1 they are so simple to make

[@Love_Fishing.]

No problem and thanks

[@lookeyboi9396]

Is it possible to give me the links to the items?

[@hastingsangler]

Hi i have put all the details in the description the hardest bit to make is the shaft and handle the rest is cheap and can get from most plumbing shops

[@johnullrich4191]

Hi do you make pumps to order

[@hastingsangler]

Hi john i do

[@johnullrich4191]

What is the cost with postage thanks

[@hastingsangler]

Copper is £45 and stainless £65 postage is £13 fully insured track and signed for

[@johnullrich4191]

Copper would be fine how do I go about paying .

[@hastingsangler]

Hi john sorry taken so long to get back to you do you have facebook at all i can then dm you details and sort payment thank you