What does gravity and the given formulas have to do with it? For more than a hundred years, the French Academy of Sciences has not accepted projects for perpetual motion machines. And here I am alone again!
Так! Его будете работать почему Я сказать так! On a more serious note, scientists have made a basic but serious mistake. They say that gravity has no energy. A working wheel will allow me to say force = mass times acceleration = mass times velocity = 1/2 mass times velocity squared = kinetic energy. In English it's f = ma = mv = 1/2mv^2 = KE. And scientists will need to accept what science says. I have 2 builds that I am working on. Those will be the most recent videos I've uploaded to my channel.
Thank you. It is almost finished. It follows Newton's 1st law of motion. A body in motion will change its motion if acted upon by an external force. A retraction line in this instance.
Lovely craftsmanship on the build. May I point out one admittedly skeptical point of contention, however? When that weight slides along the spoke and heats up the surface from the friction (even if it is millionths of a degree or less), that appears to me to be work in the scientific sense. Similarly, the creation of heat in the main bearing and in each pulley. I am struggling to see where the energy to perform that work and create that heat is coming from.
While the frame and the 2 weights on top have a moment of inertia, the 2 lower weights can be considered as 40 + 0/2 = 20 (overbalanced) and 20 + 0/2 = 10 (under balanced). That shows the weight on the right side will use 1/2 of its torque to rotate the wheel.
@@Torkx100 Yes. The movement in/out from the center has to be very smooth. A crank/slider type of setup should work. I have a simple setup with one weight that should work but I didn't built it yet. Gravity is the spring and centrifugal force helps the weights move up and down.
Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs related to angular energy continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will walk with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet.
@@free-energy-systemsI want to create a clean energy system for a cleaner world. No mechanical wheel system that does not change its angle can produce energy. Any system that violates the laws of physics will not work. You can promote this project in your country. I want to realise this project and get a worldwide patent. Of course, I need a solid and idealistic investor to realise these works. I convert angular energy into mechanical and electrical energy. I am an inventor. I am ready to do this project in every country that will support me. 98% of the published videos are wrong and do not work. I know the mistake they all make.
The dough going through the two semi circles doesn't work. I did a similar mechanism in the past. But complete your project you will learn plenty Then think of active penalties, with quick controlled swings. This way you an excellent gain. Good luck.
Nice design, but if the point of this machine is to run on its own, is not possible. If this actually worked as a perpetual motion device, then it should never sit still.
I had to take a break from it. This weekend I'll be making new axle mounts for the new bearings I have. If that goes well then maybe next week. It is a lot of work for one person. and it is a still a learning process.
@@free-energy-systems I understand, but time is getting short and your not getting any younger. A lot of people need you to get this done. We are waiting. Only you know what you know, so we can't help you. Right now, it is up to you. So get on it!
Причем здесь гравитация и приведенные формулы? Уже более ста лет Французская Аккадемия Наук не принимает к рассмотрению проекты вечных двигателей. Ивот опять один!
What does gravity and the given formulas have to do with it? For more than a hundred years, the French Academy of Sciences has not accepted projects for perpetual motion machines. And here I am alone again!
Причем здесь гравитация и приведенные формулы? Уже более ста лет Французская Аккадемия Наук не принимает к рассмотрению проекты вечных двигателей. Ивот опять один!
What does gravity and the given formulas have to do with it? For more than a hundred years, the French Academy of Sciences has not accepted projects for perpetual motion machines. And here I am alone again!
All physics textbooks give an example of a perpetual motion machine operating on the same principle. Just not working.
Так! Его будете работать почему Я сказать так! On a more serious note, scientists have made a basic but serious mistake. They say that gravity has no energy. A working wheel will allow me to say force = mass times acceleration = mass times velocity = 1/2 mass times velocity squared = kinetic energy. In English it's f = ma = mv = 1/2mv^2 = KE. And scientists will need to accept what science says. I have 2 builds that I am working on. Those will be the most recent videos I've uploaded to my channel.
I don't know if this will be enough to work, but it's very good work, well done.
Thanks. Bessler's wheels were usually twice the diameter. Gravity accelerates at 9.81 m/s so the greater the drop the better.
Really amazing ,well done ,am interested too much in such devices and physics ,wishing you all the success James Lindgaard
Thank you. It is almost finished. It follows Newton's 1st law of motion. A body in motion will change its motion if acted upon by an external force. A retraction line in this instance.
Lovely craftsmanship on the build. May I point out one admittedly skeptical point of contention, however? When that weight slides along the spoke and heats up the surface from the friction (even if it is millionths of a degree or less), that appears to me to be work in the scientific sense. Similarly, the creation of heat in the main bearing and in each pulley. I am struggling to see where the energy to perform that work and create that heat is coming from.
While the frame and the 2 weights on top have a moment of inertia, the 2 lower weights can be considered as 40 + 0/2 = 20 (overbalanced) and 20 + 0/2 = 10 (under balanced). That shows the weight on the right side will use 1/2 of its torque to rotate the wheel.
Gravity cannot be blocked so you have to counter it with centrifugal force. Simple as.
Strongly agree. And I add, centrifuge force of active pendules, where the oscillation is very fast and controlled.
@@Torkx100 Yes. The movement in/out from the center has to be very smooth. A crank/slider type of setup should work. I have a simple setup with one weight that should work but I didn't built it yet. Gravity is the spring and centrifugal force helps the weights move up and down.
Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs related to angular energy continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will walk with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet.
You might look to meet someone to work with you.
@@free-energy-systemsI want to create a clean energy system for a cleaner world. No mechanical wheel system that does not change its angle can produce energy. Any system that violates the laws of physics will not work. You can promote this project in your country. I want to realise this project and get a worldwide patent. Of course, I need a solid and idealistic investor to realise these works. I convert angular energy into mechanical and electrical energy. I am an inventor. I am ready to do this project in every country that will support me. 98% of the published videos are wrong and do not work. I know the mistake they all make.
The dough going through the two semi circles doesn't work. I did a similar mechanism in the past. But complete your project you will learn plenty Then think of active penalties, with quick controlled swings.
This way you an excellent gain.
Good luck.
Nice design, but if the point of this machine is to run on its own, is not possible. If this actually worked as a perpetual motion device, then it should never sit still.
why dont u use two wheels
i have plan
willing to sell
How much longer? You said it would be mid-June months ago!
I had to take a break from it. This weekend I'll be making new axle mounts for the new bearings I have. If that goes well then maybe next week. It is a lot of work for one person. and it is a still a learning process.
@@free-energy-systems I understand, but time is getting short and your not getting any younger. A lot of people need you to get this done. We are waiting. Only you know what you know, so we can't help you. Right now, it is up to you. So get on it!
BRAVO CAT ...tail...!!!
Éso es solo un juguete.
Y hay una mejor manera de que funcione. Eso será lo siguiente después de que termine mi compilación actual.
Faire remonter le cubes avec un aimant
The line to the weight does not change length. The distance between the fulcrum and the weight increases as the wheel rotates.
Причем здесь гравитация и приведенные формулы? Уже более ста лет Французская Аккадемия Наук не принимает к рассмотрению проекты вечных двигателей. Ивот опять один!
LOL if you have to spin it then it is doing nothing. So congrats for doing nothing
что это было ?
Lo bueno es que estudió en E.U.A🤔
What does gravity and the given formulas have to do with it? For more than a hundred years, the French Academy of Sciences has not accepted projects for perpetual motion machines. And here I am alone again!
Причем здесь гравитация и приведенные формулы? Уже более ста лет Французская Аккадемия Наук не принимает к рассмотрению проекты вечных двигателей. Ивот опять один!