Cheap Sleds BLOW UP & New Sleds RIP!
HTML-код
- Опубликовано: 7 сен 2024
- Check out the Arcdroid CNC! arcdroidcnc.com?aff=21
Buy your parts here! :
sxsblogparts.com
Yankum Ropes: yankum.com?afmc=SXSblog
5% off code: SXSblog
Rocky Mountain ATV Affiliate:
www.rockymount...
IG: SXSBlog
Facebook: SXSBlog
Patreon: / sxsblog
Garage channel: / @110garage
Man, I really hope SXSBLOG and Leo’s new channel are continually successful. I feel like a divorce kid hoping both parents are ok. 😂😂😂
What is Leo’s new channel??
@@s924920race rebuild repeat
Race rebuild repeat
@@MegaOg123 haha looks like you better expect your comment to get axed since apparently mine did
They're (The other two) already hemorrhaging money on busted "racecars". Sounds like the Accelerated Performance supra all over again.
Great overall content today! Love the “off camera” chat with Matt and Mike towards the end!! Brother talk with Joey being amused behind the camera. Love it! More please!
I’ve seen a few comments about the content feeling “off” I think part of the reason for it feeling off is that no one is narrating while filming the video sequences. Leo would always be talking to the camera. I’m still a huge fan but the videos need some narration when there is no dialogue.
Yes your right @sxsblog that is what the videos have been missing
Thank the lord we don't have to listen to Leo "narrate" anymore.
I disagree. Whoever is infront of the camera should be the voice. Especially with like 7 ppl around shouldn't be any reason someone behind the camera has to chime in.
Matt-make sure that the exhaust valve guillotine isn’t contacting the side of the piston. That’s a known issue with these Polaris sleds with a lot of time on them. The guillotine stop in the cylinder just wears out over time…Just grind down the edge of the guillotine to make clearance
If you don’t have the upgraded stainless steel ones, it’s heavily suggested to replace them, as when the guillotine stops wear, they can snap off and fall into the cylinder. Especially on the 800’s
it looks like it was sucking air somewhere. Crank seal or carb boot leaking at the cases would be my guess.
Justin is rapidly becoming my new favorite since Franky left...Dude is hilarious to me.🤣🤣🤣
Frankie and Leo have their own channel
With the amount of time we see him riding, which is a fair bit, he's going to get good, quick on those machines.
@dadbeard-pi2oy I fully agree with you on that one
@@Berm_Blaster it's all part of the learning process. I'll admit, that woop crash wasn't elegant. But he learned a lesson.😂
@@Berm_Blaster he went full 110...
Good to see sous more in the videos. Doug and sous are the og’s.!
That’s definitely on purpose at this point as part of their build back better strategy lol
He brings the OG energy for sure!
Grind Hard has made some incredible stuff with the Arcdroid. They also interview the Arcdroid inventor, Andrew Miller, on their Sent and Bent podcast.
I can't wait to see what you guys create with it!
Yea I first saw it on Grind Hard. I talked to Andrew a little on the phone and he's a cool guy for sure, loves it when ridiculous stuff is built using his machine lol
The vmax 4 is by far the coolest sled you guys have
Be glad you leave near Mickeys, I’m about 45 mins north of there and it’s like heaven for a man who runs older sleds 😂
Joe's sled sounds rad in my headphones. Cool sled, man!
Sounds like a 2 step at the idle, and on the throttle closing. Sounds sweeeet
You better watch out, 2 drunk guys and a station wagon are gonna steal your views 😂
A WHOLE video with no LEO. INCREDIBLE. Been a long time since i could tolerate a whole episode. Keep THESE coming!!!!!! So Stoked to watch how this plays out with these!!!
Leo isn't on the team anymore where have you been the last month or so
Right?!?! Reading some of the comments from all the nut-huggers over yonder I thought I was only one that though Leo was cringe at best.
@@jeffmielke1504 i clearly said i havnt been able to tolerate an episode is soo long. Didnt catch that? So no i had no idea hes been gone and i couldn't be happier! Now i get to be a viewer again and not cringe every time i hear him or watch him be a blatant prick to the other guys and their equipment!
U finally caught the bug. BEST powersport in the game. And ive done em all. Nothing beats a sled in good snow. From stop pin it and when the skis finally touch the ground your doing 100mph. Brp is right. We Canadians know how to build a sled. If you havent done it. DO IT rent 1 for a day i promise youll have the sled fever
Joey knows what’s up. All his stuff is sick!!
Hahaha that lynx sounds like shit.
For polaris giving sxsblog a sled i saw a ton of lynx footage.
Leo and Franks new channel is keeping up with almost the same amout of views already
The 2stroke / 4 stroke issue is partially power (and when it comes on the power band) but its also weight. Traditionally 4 stroke engines are heavier and therefore the sled is heavier and less nimble to sling around in the mountains. Tech changes and the difference may not be wide a gap anymore but riding an old 4 stroke vs a 2 stroke was night and day difference in handling in the powder.
famous last words ''they always run the best before they blow'' and that they do my buddys freeride was running soo good she had so much power and balls and them boom 30 psi in one hole and the other 110
Awesome video! Love the snow content. Hopefully winter will come back soon. Keep up the good work.
The stock vmax4 sounds like an orgy at a chainsaw convention.
The Vmax4 outshines em all! The sled content has gotten really awesome
Justin carving in neutral position like a boss!! Keep up the great videos yall rock!
lol little Frankie and Leo gonna take over with there new channel
Make sure you check the crank bearings on that! Those liberty 800 motors are known for crank bearings!
I feel like if they’re gonna get rid of people all the time, this channel would be like 100x better with everyone except Doug and Joey
At least the garage channel is mainly mike and matt.
@@dondelche fair point. I just feel like Joey and Doug are so damn cringy it makes, what would be really funny/cool, videos kinda hard to watch. I feel like when Leo was around it made the cringy stuff seem more normal now they just sound like old dudes with too much time.
@@Caveman_TX completely agree.
Steve, you should try disconnecting the wiring to your power valve controller, and connect the vents to each other with a piece of gas line.
I'll give it a shot if this new regulator doesn't solve it, thanks!
The vibe is getting better
Sous behind the camera!!! 😂 awesome like ls george and cleeter!!
I enjoy every video you guys do they are so fun!! I think you should get your hands on a Segway villin 1000 cuz I’m curious!
Y'all are awesome can't wait to meet y'all
So fucking glad for this video...
True dat bro
"Almost beat me" Cue the Fast and Furious references..
Thundercat .. Brings Back Great memories 😊
Thanks for the Great content 👍
Is that the new frame for the Yamaha
If Italians made a sled, it would 100% sound like that vmax 🤣
Matt check your jets in the carbs. Maybe the previous owner jetted the one carb different and that’s why it more lean. Sorry about your sled. Glad to see you are going to rebuild it. Great video guys.
Hey Leo has his own channel with FRANKIE!
Wanna see that apex drag race the lynx
Good dudes doing what they love and having fun. What more do ya want from a youtube family. Cheers guys. Hope to see you guys at the freedom 500.
It'll be interesting to see if they get an invite or not.
I have a free Polaris, Indy, 500 if you want it for a back up sled in the cheap sled challenge, it run runs for sure, the axle broke but I have another one and the bearings all you have to do is put it together drain the fuel tank, new gas you got a ripper ! I promise come pick it up Erie Pa
Love the snowmobiling series
Cant wait for YXZ content
Mag side CYL on the old Polaris Needs the fuel screw turned up the width of the blade of a screw driver from the Clutch side.. all the 700/800 edges sleds burn down on the mag side...We deff Experience that here in Canada With No speed limits and miles of logging roads.
Vmax 4 sounds amazing. “I don’t care if you win by an inch or a mile”
So whats uncle chets thoughts on all the crew being booted? Remember if it were not for him sxs blog wouldn't be in that huge factory.
Doug was the guarantee for that property. Turns out Leo wasnt that honest.
@@woofersd2383 Here I thought I was the only one who go con-man vibes from that dude.
The new Lynx´s are awsome, you dont even need that many CC do wheelies, i wheelie with my small 600R Lynx
Completely different energy without Leo
You're right... it's better! Less douchey
Better* energy
I liked Leo it was annoying when he was always trying to get the guys to do more crazy stuff for videos purposes only. Leo was all about clicks. It sucks that the SXS Blog as I've known since the beginning is all but gone. Hard to run a business and stay successful with a bunch of buddies.
They’ve been filming with a different camera since Leo left, that’s why it “feels” off, I still watch but it’s not the same…
I think part of the reason for it feeling off is that no one is narrating while filming the video sequences. Leo would always be talking to the camera. I’m still a huge fan but the videos do. Red tweaking.
Will you guys test a segway villan??
We don't get much for snow here anymore so its only the die-hards who buy new sleds. The ditch banger sleds rule the roost out my way.
That lynx sounds so rowdy.
I had an M9000, 1100 turbo 4 stroke, can, tune, clutch. The fun factor of the turbo 4 strokes is just off the charts.
Purple yz frame in the last clip????😮
That 800 with some performance parts. Will keep up with the pack of guys with 2024s.
You guys seem so happy lately
Love the video boys. No snow here this year. Watching you guys rip brought a big smile to my face.
Is this the same channel I've been watching for years 🤷
Happy to see that new yxz frame in the background
FPV clip was killer
Need some more info about everyones newer style sleds. Give us the run down on all the specs and details of each! I know what Sous knows about sleds so fill me in lol.
I just have to say "ELECTRIC ANYTHING WILL NEVER BE THIS COOL"-"NEVER!!"!!!
Don’t quote me on this, but I believe they are step jetted, and that cylinder supposed to be a little fatter than the other one
Good ol ethanol. And nothing has a petcock anymore but if it does when u store it let it run till it dies. And you wont need a carb cleans every year. Thats what ot needs.
Check the tail light wires on the rev had similar issue with mine and it was ground out
The lynx is giving slight x3 vibes on the exhaust note.
Dude... it's the same motor lol
@@owendesautels9612 bro ima dumbass lol thx for the info tho.
Looks like allot fun in the snow 😂👍
I see a YXZ frame!
Alot has changed since the last time i watched. Trying to backtrack now
Old sleds blow up, it's a reality. Hope he gets it running again, and they don't take away too many points
great fun guys
Thats my next sled lynx 900 turbo r xterrain
Jeez Louise that 4 sounds amazing
Love that v-max 4
Make sure to get with Grind Hard to learn how to make hexagons with the Arcdroid.
I see you got a new yxz frame there
Love the videos...I wish you guys had more videos more often..keep up the great work guys!!!
Joeys sled sounds like it's got rolling anti-lag
Let's goo boys sled days equal fun days
Love the ESAB Rebel welder!
"It's funny to start it but actually not good" lmfao 😂
I noticed your v-max 500 back there, you used for sno-x. I have a shortened Venture 500 I use for sno-x. Would you like to exchange clutch and gearing set ups?
awesome keep up the good work the old lady drives a 2003 xc 700 smokes my nytro top end across the lake lol
Need to see Thundercat vs Vmax eh buds
I had heard a little rumor...figured I would swing by and check to see if it was true...Happy to say that I have now REsubscribed!
great team
Justin is 509 from head to toe except those damn carharts. Come on man, you are not a pig farmer. Then he actually puts snow gear on and it’s carhart colored. Nice!
Bahahhahahaha 😂
Love the cheap sled challenges!
I miss the Old Sleds
That thundercat has something audibly rubbing when it goes ripping past at full throttle, I think that may be the source of the smoke, I’d look at the track tunnel and the clutch
A thundercat with the yammy motor will smoke that skii poop
What were the symptoms off the bad voltage regulator? Same sled been chasing issues hard switchback 600 ho
Great times. At least you have some snow!
I’m still waiting for you guys todo a long track phasers build so I can copy you guys
Not seen that many of your video´s yet, but i watch new and last year. and it always seams to be 1 inch of snow and mud. do you get any proper snow ? :)
I understand what Doug means. I have an 04 f7 red team edition and man does it have some balls when it runs right and i have twin pipes, clutching, and timing done. But it just doesnt ride right. Steers like crap and doesnt have that mobility for you to throw it around in the powder like other sleds
Hey what’s up bros how y’all doing much love
Yay mats still in it. Way to go team
Love the snowmobile content let's go!!!
That ain't a whole lotta mud... Saw a guy take a brand new Arctic Cat through the bog pit back when they used to have the mud drags up at Albright Shores... That thing flat hauled it down through there..
That doos. Gonna blow the crank. Better check that pto seal.