A pretty dope tool. I definitely would get one if I find myself with a super super stuck sleeve, but I would still use it like a zip tie through the exhaust though where I turn the engine over from the flywheel nut to push the sleeve out. The force required to pull instead of push a really stuck sleeve out results in the effect of letting go of the rope in tug of war once the sleeve finally does break loose
Hi the tool looks functionable but my take on it you need to heat up the block then gently pull the sleeve out because aluminum expand with heat God bless
I didn't touch upon that in the video, but personally heat hasn't really done much for me. When the sleeve and crankcase are locked together the heat conducts very well. I've even tried freezing water in a sleeve to make a sleeve-shaped ice cube. I then heated the crankcase and put the ice in the sleeve. It didn't help. I haven't even tried heating up a stuck sleeve in years.
www.ebay.com/itm/325439154967?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=oYMOKW5dRM2&sssrc=2349624&ssuid=fHwZ1_bCRtq&var=&widget_ver=artemis&media=COPY I bought mine on eBay(link above) I am thinking about making a few of the pushers I use, I already bought the rod and some plasti-dip. Thanks for watching
A pretty dope tool. I definitely would get one if I find myself with a super super stuck sleeve, but I would still use it like a zip tie through the exhaust though where I turn the engine over from the flywheel nut to push the sleeve out. The force required to pull instead of push a really stuck sleeve out results in the effect of letting go of the rope in tug of war once the sleeve finally does break loose
Thanks for the video! Just picked up one of those sleeve pullers from Websters Mods. Wasn't exactly sure how to use it, now I know!
If it did catch , wouldn't take much to file to fit cool tool I'll be looking for one thank you
Nitro tools are very cool.
great video and cool tool
Hi the tool looks functionable but my take on it you need to heat up the block then gently pull the sleeve out because aluminum expand with heat God bless
I didn't touch upon that in the video, but personally heat hasn't really done much for me. When the sleeve and crankcase are locked together the heat conducts very well. I've even tried freezing water in a sleeve to make a sleeve-shaped ice cube. I then heated the crankcase and put the ice in the sleeve. It didn't help. I haven't even tried heating up a stuck sleeve in years.
Can you please suggest, where to get that tool. If you are selling, im happy to buy
www.ebay.com/itm/325439154967?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=oYMOKW5dRM2&sssrc=2349624&ssuid=fHwZ1_bCRtq&var=&widget_ver=artemis&media=COPY
I bought mine on eBay(link above) I am thinking about making a few of the pushers I use, I already bought the rod and some plasti-dip. Thanks for watching
Awesome video but could’ve been a lot shorter