Just a heads up, consider watching highland cycles videos on the panthera kit. They had some significant issues with heat generation in the left case that aided in a bottom end failure. Might be more headache than it's worth. What a steal on the YZs. Even the 2011 with its situation will be a great project for someone. Good work man!
Morgan with Highland said it "might" of contributed to the lower end failure. I put over100 hours on a bottom end with a Hot Rod crank, throwing around a ESR325 75.5mm piston, Panthera e-start, and the crank was still tight and within spec when I rebuilt it and threw an oem crank in it. I now have a little over 160 hours with the Panthera e-start and only had the issue with the original stator. So just because 1 person stated that it might have contributed to a failure, doesn't make it fact! There's a lot of us running it that doesn't have any issues.
@@KincadePavich He had a nice install video as well as a follow up review recently. A good watch for sure if your installing one. Be sure to watch the follow up. They are roughly a year apart. I you don't follow his channel you should. Great channel and have been subscribed for a while now.
Like the YZ builds. How big is the bottom hole on your tire rack. I've built one before, but the proportions of yours, looks nice. Going to rock one out to get some tires off the ground and extra rim storage (original Gas Gas rims and spare tires). Can you throw out the measurements for the rectangle?
"Clapped out" must mean what we used to call "shot" when something was worn out, or wore da fk out, used up wo man, or man with womb as in female or ho. What will "worn out" be called by the next generation? What word will replace the loosely used word "awesome"? "Things may become better, things may become worse, but things will never remain the same." James L. LaFarlett
Everything that was done was very good except putting a panthera starter was the only problem very good idea but very bad design nothing but junk the stator will not last long always leaks oil I bought one for my 2023 yz 250 I took it off and it sits in box paid $2000 for it and the jerk from Canada will not back it up I would not put there name on any thing junk I will sell the whole set up charging I got complete set up if you think they are good you can buy mine less 1/2 price
Once the LOUD annoying music started playing I stopped watching and unsubscribed. Here's a tip. When you buy your race bike always buy a spare brand new one in crate. Then you won't have to waste valuable time rebuilding trashed MX bikes like those pieces of junk. MX= disposable!
@@KincadePavich MX bikes are 99% designed for racing. Mine last one season and are sold on for a fraction of what the new price was. It's an expensive sport that requires decent sponsors or deep pockets if you are a privateer. I have a shed full of brand new MX bikes dating back to the 80's. My sponsors always let me keep the spare bike and sell on the raced one. Cheers Kincade. All the best.
“Everything old is new again” Pretty ironic name for that trash ass comment. I also appreciate you having 0 videos. I hope you have a shit day tomorrow
This was so satisfying to watch love your builds mate 🤙
Thanks a ton for watching, glad you enjoyed!
@@KincadePavich hey bro. I think someone is trying to use your name to scam.
I like that you soaked the clutch in oil. Never seen that good tip. Fair price too. I’d pay that. Let’s see the other build please!
Other build will begin soon and I'll have a full build series on it! Not sure when you can expect the first episode yet... Thanks for the comment!
Awesome job Kincade 👏
Just a heads up, consider watching highland cycles videos on the panthera kit. They had some significant issues with heat generation in the left case that aided in a bottom end failure. Might be more headache than it's worth.
What a steal on the YZs. Even the 2011 with its situation will be a great project for someone. Good work man!
Noted - will definitely check that out! Thanks for the heads up. Appreciate it!
Morgan with Highland said it "might" of contributed to the lower end failure. I put over100 hours on a bottom end with a Hot Rod crank, throwing around a ESR325 75.5mm piston, Panthera e-start, and the crank was still tight and within spec when I rebuilt it and threw an oem crank in it. I now have a little over 160 hours with the Panthera e-start and only had the issue with the original stator. So just because 1 person stated that it might have contributed to a failure, doesn't make it fact! There's a lot of us running it that doesn't have any issues.
@@michaelwendler5589 just wanted to note it in case he didn't see his video. Smaller channel so not as widely known
@@KincadePavich He had a nice install video as well as a follow up review recently. A good watch for sure if your installing one. Be sure to watch the follow up. They are roughly a year apart. I you don't follow his channel you should. Great channel and have been subscribed for a while now.
Hell yeah!! Sick video!!
@kincadepavich... your not the same channel dude.
Quick turn around. BTW the garage looks great. 👌
Thanks so much! Been really enjoying the new use of the space!
Your videos are amazing. I rode a YZ250 and that was my number (417)..........back in 1983. I am looking for another bike now.
Love your work
Thanks Kyle! Appreciate your continued support!
I live right next to Leavenworth! 1,000 of trails around here. When are you coming back?
Beautiful
Appreciate it!
Like the YZ builds. How big is the bottom hole on your tire rack. I've built one before, but the proportions of yours, looks nice. Going to rock one out to get some tires off the ground and extra rim storage (original Gas Gas rims and spare tires). Can you throw out the measurements for the rectangle?
I will get measurements next week and follow up on this! Out of town for a few days.
@@KincadePavich Awesome... in no rush. Swapping tires around today getting a bike ready for sale.
Hey man, how did you learn to work on bikes? I love your videos man! Keep it up and cheers from Venezuela
Good evening, I have a 2013 honda crf 250x in Brazil, in the US do you have a plastic kit model of the 2022, but that will fit the 2013?
America is so weird bruh, a clapped out yz250 costs like 3k here
Fr. Where im at, 1985 125cc's be asking 2850$ lol.
Damn. Nice one m8
Thanks Sean!
8:30 is uh... is that a good idea? Your garage getting a little cloudy in there
It’ll bufff
Nothing like the smell of 2 stroke
Awesome dude I have a question could you do a yz 85 plz
Looks like the right side crank seal is bad
NEED MTB CONTENT i saw ur canyon it looks nice
Liked it just subbed
Do u ever do any 4stroke bikes
Bro get filming the MTB sessions next time !!
Do u sell your builds or do u keep them if u sell them where can I buy one??
I actually have multiple builds for sale right now! 05 RM125 and 03 RM125. This bike is for sale also but pending sale tomorrow!
"Clapped out" must mean what we used to call "shot" when something was worn out, or wore da fk out, used up wo man, or man with womb as in female or ho.
What will "worn out" be called by the next generation?
What word will replace the loosely used word "awesome"?
"Things may become better, things may become worse, but things will never remain the same." James L. LaFarlett
Hahah, love this comment! Yes, you've nailed it spot on!
It sounds great but please don’t time lapse to much
wrong logo that's the one for instruments😂
The super glue and then break cleaner🤦
Everything that was done was very good except putting a panthera starter was the only problem very good idea but very bad design nothing but junk the stator will not last long always leaks oil I bought one for my 2023 yz 250 I took it off and it sits in box paid $2000 for it and the jerk from Canada will not back it up I would not put there name on any thing junk I will sell the whole set up charging I got complete set up if you think they are good you can buy mine less 1/2 price
3k for that?😂i offer u 1900 on a good day
Cool cool, I sold it for 3K
I think some one almost scammed me. Lol
Once the LOUD annoying music started playing I stopped watching and unsubscribed. Here's a tip. When you buy your race bike always buy a spare brand new one in crate. Then you won't have to waste valuable time rebuilding trashed MX bikes like those pieces of junk. MX= disposable!
Thanks for the great tip and lovely comment!
@@KincadePavich MX bikes are 99% designed for racing. Mine last one season and are sold on for a fraction of what the new price was. It's an expensive sport that requires decent sponsors or deep pockets if you are a privateer. I have a shed full of brand new MX bikes dating back to the 80's. My sponsors always let me keep the spare bike and sell on the raced one. Cheers Kincade. All the best.
“Everything old is new again” Pretty ironic name for that trash ass comment. I also appreciate you having 0 videos. I hope you have a shit day tomorrow