For a newbie, this is a great Tutorial. the person said what he is doing and explains it well. Also there is NO background music to interfere with what he is talking about. again Great Video.
I'm going to be using this speaker to mic a guitar amplifier while simultaneously playing back a backing track (bass, keys, and drums) through the speaker for a wedding. Would it be better to use the "Music" mode or the "Live" mode? - I have the volume on the Master at +9db - The volume of the backing track played through an iPod (1st Line-Mic) is set to "0" (midway) - The volume of the mic amplifying the guitar amplifier (2nd Line-Mic) volume is set to about 3 quarters up The sound of the backing track is a little bit to bass-heavy (seems the Live mode is lower bass levels which would help) BUT the volume of the guitar seems bit to thin and treble heavy (even with the guitar amplifier TREB EQ set pretty low and the bass generous). What would be the best protocol for fixing this through the PA given mic angle and amplifier EQ stays constant? Any suggestions greatly appreciated - thanks!
Man it's hard ajusting to powerd cabs when your so use to hard hitting Yamaha s115club wood cabs..but I will manage..took 2days to calibrate the Zlx15p cabs there no slouch tho..
If i need more volume (more than 0db), whitch knob should i turn up without get into clipping: the line or the master volume? I ask this because on the line knob, above 0db i see mic imput. Thank you.
Maybe a dumb question but I have 1 sub for each speaker therefore trying to figure out how to connect both speakers and both subs at same time with only 1 output line? Do I need an adapter or something?
Thanks for the video. I have two zlx and two etx speakers both 12" speakers is it ok to have these linked up with each other, so I have 3k per side. I don't have any subs.
Whwn you buying a ev zlx 12p what you get in the box? Is there a one or two speakers or one is with amplifier and another is using the other one amplifier can you explain please
I want to buy these speakers Please tell me will it be ok if i play it for long in high temperature areas?? As in india temp rises to 47 celcius some time and after long use time the internal components will got heat up from inside the speaker Will it work in these harsh heat condition?? Please assist
I have Zlx-12p, zlx-12bt and elx200-12sp...how do you setup the sub dsp to match all 3 soeakers. The zlx-12bt have the optionto choose the elx200-12sp sub but the zlx-12p does not have the option for the elx200-12sp sub. Can some one direct me to match the low, mis and the highs.. i dont want to by another zlx-12bt to match all.. should i just use the 100hz option? Thanks
My speakers keeps clipping,, how do I fix that, I’m using a Yamaha 8 channel mixer.. or what options do I have to use. Also, why they get so HOT. When playing..??
Hi Mate. Can you pls help me in setting of DB and Volume of the these speakers.. which should be above.. Volume or DB? I do volume gain at 12o’clock and DB at 4-5? It gives feed back to the microphone.. should it be at low volume and DB at 10? Thanks
For a newbie, this is a great Tutorial. the person said what he is doing and explains it well. Also there is NO background music to interfere with what he is talking about.
again Great Video.
great speakers. sounds amazing
Sin duda alguna asta el nombresito esta perron!! EV..!!! Saludos
this is my favorite speaker, and soon you too !! EY zlx 12p !!
I do appreciate this 🙏
AJ Peterson! Wasnt expecting that!
We use these speakers in madison, wi and love them!
Ted @ Your Mix Entertainment!
I'm going to be using this speaker to mic a guitar amplifier while simultaneously playing back a backing track (bass, keys, and drums) through the speaker for a wedding.
Would it be better to use the "Music" mode or the "Live" mode?
- I have the volume on the Master at +9db
- The volume of the backing track played through an iPod (1st Line-Mic) is set to "0" (midway)
- The volume of the mic amplifying the guitar amplifier (2nd Line-Mic) volume is set to about 3 quarters up
The sound of the backing track is a little bit to bass-heavy (seems the Live mode is lower bass levels which would help) BUT the volume of the guitar seems bit to thin and treble heavy (even with the guitar amplifier TREB EQ set pretty low and the bass generous).
What would be the best protocol for fixing this through the PA given mic angle and amplifier EQ stays constant?
Any suggestions greatly appreciated - thanks!
Super sound!!!
Love my EV 12bt, came here to make sure am using them correctly
got a pair of ev zlx 15inch pwr speakers what would be the proper setup when playing music now much bass treble should be set thanks
Man it's hard ajusting to powerd cabs when your so use to hard hitting Yamaha s115club wood cabs..but I will manage..took 2days to calibrate the Zlx15p cabs there no slouch tho..
Is that frequency response for a specific zlx?
Does EV still make large home audio loudspeakers like they used to???
Hi!! I just bought an EV ZLX and I have a question! It might sound stupid but I’m learning electronics !
Can I use a mixer call ZMX122FX? 🙏
Can you hook up a non powered base bottom to you powered speakers ?
Can this also connect to a mixing desk with these input
If i need more volume (more than 0db), whitch knob should i turn up without get into clipping: the line or the master volume? I ask this because on the line knob, above 0db i see mic imput. Thank you.
El volumen máster
How do you connect the ZLX speaker to a QSC kseries subwoofer for live event
Maybe a dumb question but I have 1 sub for each speaker therefore trying to figure out how to connect both speakers and both subs at same time with only 1 output line? Do I need an adapter or something?
Make sure you get a sub! they limit very fast.
Thanks for the video. I have two zlx and two etx speakers both 12" speakers is it ok to have these linked up with each other, so I have 3k per side. I don't have any subs.
My Question about the zlx 15p is if it can work with 220 volts,if it have a dual voltage switch or transformer builtin ??
Whwn you buying a ev zlx 12p what you get in the box? Is there a one or two speakers or one is with amplifier and another is using the other one amplifier can you explain please
Can these speakers go through a channel mixer?
Can I use the ZLX-15P with the ELX200-12SP Subwoofer ?
When I do this, the sub only works for one channel. Is there a way to get the zlx’s in stereo mode and a single sub in mono?
I want to buy these speakers
Please tell me will it be ok if i play it for long in high temperature areas??
As in india temp rises to 47 celcius some time and after long use time the internal components will got heat up from inside the speaker
Will it work in these harsh heat condition??
Please assist
Hi there! I love to buy this product
Amigo tu me podrías explicar cuales deben ser los volúmenes óptimos tanto en los auxiliares como en el volumen master tocando en vivo..Gracias
How can I update my software on my zlx12p?
I have Zlx-12p, zlx-12bt and elx200-12sp...how do you setup the sub dsp to match all 3 soeakers. The zlx-12bt have the optionto choose the elx200-12sp sub but the zlx-12p does not have the option for the elx200-12sp sub. Can some one direct me to match the low, mis and the highs.. i dont want to by another zlx-12bt to match all.. should i just use the 100hz option? Thanks
Did you ever find out what the answer was for the hz setting you should have it on ?
I would like to use this as a guitar rig with an iPad, audio interface and bias fx for practice only. Is this loud enough to be heard over drums?
For sure ! You could use this live in a small to medium sized club. At home you wouldn't be able to get half way up the volume if you have neighbors
My speakers keeps clipping,, how do I fix that, I’m using a Yamaha 8 channel mixer.. or what options do I have to use. Also, why they get so HOT. When playing..??
got two coming in Tues.!!!!!!
My front LED doesn't work even when is on. If someone can help me. Thanks.
question: for a church setting which mode is better for the speakers
Live
How long is the manufacture warranty on the ZLX15P?
Daniel Ontiveros EV for live warranty
How do i connect two of these speakers? Is there a specific cord or cable that is needed? Please help!
You should use a mixer or interface and xlr cables.
Can I use the ZLX 15" powered speakers with the ZXA-1 12-inch subs?
I USED 12'S AND IT SOUNDS GOOD
👍
Amazing in the club
Cool
How I do connect BT device??
how to contacted Electro-Voice ETX-35P to another EV powered speaker
Hi Mate.
Can you pls help me in setting of DB and Volume of the these speakers.. which should be above.. Volume or DB?
I do volume gain at 12o’clock and DB at 4-5? It gives feed back to the microphone.. should it be at low volume and DB at 10?
Thanks
What did happen?
I have a zlx there is a distorted sound coming from my tweeter I tried replacing the entire tweeter including magnet to no avail any ideas
Hello, you have tutorials in Spanish ?
still have no idea how to use this amp unreal so confusing
Ever try using the ZLX15 strictly as a subwoofer before?
Old school no Bluetooth....
That taught me nothing about how to use this speaker.