Hi guys! I see a lot of comments regarding the ECU remapping - I did the dyno tune on this exact bike so if anybody has any questions, feel free to write!
Good jop , I have a little problem. Please someone help me. I have check engine light after i install heders akrapovice titanium on my cbr1000rr-r sp code dtc 133 its O2 sensor so what should i do to fix it ?! And im sure i installed the o2 sensor both of them perfectly right Any suggestions,,,
Thankfully she seems to be quiet right now, at least she isn’t in the news here in the UK although her friends are doing their best to disrupt the distribution of oil based fuels. That exhaust sound and seeing flames shooting out explains why I find racing of electric vehicles a very boring activity 🇬🇧
She's a victim of child abuse, ideological warfare. Her OFFICIAL "story" that made her so popular, is she just happen to meet a billionaire climate change advocate, that just happened to see her protesting on his walk to work. Ya right
Nice job. Whenever I’m swapping out exhausts and retuning bikes I always make sure I’m wearing Nitrile gloves as fingers prints will be permanent after it’s full heat cycle. Not as important on a fully faired bike, just my OCD. Keen to knit how much it cost and what performance gains you get. 👍😎🇦🇺
@@JohnSRR-lw4bx The way I look at it is the gloves are a cheap way of insuring you don’t miss any finger prints as once installed it’s harder to clean every inch properly. Each to their own I guess. 👍😎
Can't believe there is no review for this specific model since 2022 has different performance than 2021/2020 CbrfireBlade 2022 is faster and Quicker due to increase compression ratio also New design of Air intakes and wheels
Factory narrowband sensors were disabled with the ECU reprogramming. I did the tuning on this exact bike, if you have any questions you could write me :)
Great job. i wait for my Akrapovic ( the same full titanium) for one more month. But what about the flash? I know that you need to resoft the ecu because you de cat it....
@@snipertuning Did you fully de cat it? And also change the ecu soft? I have a lot of problems with Brent Tune until i remove the lambda sensor. It get in the limp mode from time to time. Now is ok
@@emilbalan6598 Yes, it is a full racing exhaust system, and the lambda sensors are needed to be disconnected from the connectors aswell. But there are some parameters in the ECU that need to be set accordingly. The bike works really well after the dyno tuning.
@@snipertuning Practicaly...another bike. i belive it is the best from Romania, with Full Akrapovic, MWR velocity stacks, MWR air filter and stage 2 Brent Tune. What else do you recomand ?
Looks exactly the same as the stock one (good luck making a fool of yourself arguing with that). The sound is different, much lauder but probably will make you more neighbour enemies that you would expect and not much if any difference on the race track...
The only big difference between this full exhaust line and any other brand is a couple of grams less and the price. The gain might be the same after the dyno tuning. The sound has a lot more base but I use this bike only on track.
Hi guys! I see a lot of comments regarding the ECU remapping - I did the dyno tune on this exact bike so if anybody has any questions, feel free to write!
Good jop , I have a little problem. Please someone help me. I have check engine light after i install heders akrapovice titanium on my cbr1000rr-r sp code dtc 133 its O2 sensor so what should i do to fix it ?! And im sure i installed the o2 sensor both of them perfectly right
Any suggestions,,,
08:07 sounds great ! you looks like happy
Man greta thunberg must be screaming right now.
Thankfully she seems to be quiet right now, at least she isn’t in the news here in the UK although her friends are doing their best to disrupt the distribution of oil based fuels. That exhaust sound and seeing flames shooting out explains why I find racing of electric vehicles a very boring activity 🇬🇧
And I need to scream to my wife when one of these loud bikes pass by 😡
She's a victim of child abuse, ideological warfare. Her OFFICIAL "story" that made her so popular, is she just happen to meet a billionaire climate change advocate, that just happened to see her protesting on his walk to work. Ya right
😂😂😂😂😂😂😂
Wait till you add the Race Map, very nice
Such a beautiful bike!
Nice job. Whenever I’m swapping out exhausts and retuning bikes I always make sure I’m wearing Nitrile gloves as fingers prints will be permanent after it’s full heat cycle. Not as important on a fully faired bike, just my OCD. Keen to knit how much it cost and what performance gains you get. 👍😎🇦🇺
And a alcohol wipe down before first heat cycle.
Or WD40
Doesn't matter if you use gloves. Spray on WD40 and then wipe everything off with a clean rug.
@@JohnSRR-lw4bx The way I look at it is the gloves are a cheap way of insuring you don’t miss any finger prints as once installed it’s harder to clean every inch properly. Each to their own I guess. 👍😎
Dear friend, please teach me how to change the coolant. Honda CBR1000RR-R Sp. Please.
Can't believe there is no review for this specific model since 2022 has different performance than 2021/2020
CbrfireBlade 2022 is faster and Quicker due to increase compression ratio also New design of Air intakes and wheels
I stumbled upon those facts as well and ordered one lol..
@@Sneakertip_07 can you Review For fireblade lovers?
I thought you were meant to clean the pipes before start up to avoid smudge burns?
Hello, please help me. I wonder how you solved the check engine lighting
I did the ECU tuning on this exact bike, if you have any questions you could write me to solve your issues. :)
What did u do with the valve motor?
Hi. I am curious. I just want to ask whst is the model if your new Akrapovic set up? 😁
Hello, this is the titanium muffler with stainless steel headers.
@@RacingandAdventure I'm seeing 1800euro for the price is that right
Is that a racing screen from puig r racer?
Exactly! Hard to find, always out of stock.
sounds amazing!! how did you remap it? and did the check engine light turn on?
I did the ECU tuning on the dyno for this bike, no check engine lights.
Fantastice bike👑👑👑
This has to be one of the first ones built what is the build.number on this?
Can I ask what you did with the 2 sensors that came out the stock system please
Factory narrowband sensors were disabled with the ECU reprogramming. I did the tuning on this exact bike, if you have any questions you could write me :)
Akrapovic Model name plzz 🥺🥺
Now a remap!
Great job. i wait for my Akrapovic ( the same full titanium) for one more month. But what about the flash? I know that you need to resoft the ecu because you de cat it....
Willing to sell your oem muffler?
I did the tuning on this exact bike, if you have any questions you could write me :)
@@snipertuning Did you fully de cat it? And also change the ecu soft? I have a lot of problems with Brent Tune until i remove the lambda sensor. It get in the limp mode from time to time. Now is ok
@@emilbalan6598 Yes, it is a full racing exhaust system, and the lambda sensors are needed to be disconnected from the connectors aswell. But there are some parameters in the ECU that need to be set accordingly. The bike works really well after the dyno tuning.
@@snipertuning Practicaly...another bike. i belive it is the best from Romania, with Full Akrapovic, MWR velocity stacks, MWR air filter and stage 2 Brent Tune. What else do you recomand ?
Wow that's quality
Do you sell the oem stock muffler? I'm. Really really interested for my fireblade project :)
Good job.
what a beauty HONDA
You can add db-killer too ?
Yes you can.
Great Job and sound. What about the Honda Recall for the Oil cooler pipe
We’ve changed a couple of things on the cooling
We’ve changed a couple of things on the cooling side.
Have you fitted an exhaust valve servo override?
Canceled the exhaust servo with the help of Snipertuning.bg
Super top 😊
Holy sh*t! That is one badass Fireblade💯🔥🦾🏍 Job well done sir👍🏽
HONDA SPORT RACING.
POWERFULL IT'S AMAZING.
It's way to lean flames and pop need a remap for sure....
👍👍👍👍👍👍👍👍
Hello thank for making video appreciate content. Where did you buy such a tall and long windshield and how did you brace it out so far
Where did you get the decals for the fairings?
It would be better that you leave original muffler and just change exhaust manifold.
Chain adjust lock nut is loose
億単位の開発費出したマフラーを変えちまうなんて
you need to change your tires
Looks exactly the same as the stock one (good luck making a fool of yourself arguing with that). The sound is different, much lauder but probably will make you more neighbour enemies that you would expect and not much if any difference on the race track...
The only big difference between this full exhaust line and any other brand is a couple of grams less and the price. The gain might be the same after the dyno tuning. The sound has a lot more base but I use this bike only on track.
smoke comes out of the garbage :D
Gundam
Don’t know how to tell i this but they look the same … there I said it
Monkey biznis
Should keep it like that🫢🫢 6:27