DISAPPOINTMENT!! Beast Deities B001 Xeno Vegeta Comparisons and Headswaps!!
HTML-код
- Опубликовано: 10 фев 2025
- Hey folks deano here with part 2 of my beast deities / kong studio xeno vegeta review! Do other heads work on this guy and vice verse? ow does the new body compare to old ones? Lets find out!
Ali Express Link: s.click.aliexp...
kong making their neck pegs not only obscenely incompatible but also very difficult to swap out are one of my least favourite things about them, if you could get rid of their worse sculpts or use their better ones elsewhere that'd be fine. since tonsen's heads look like they were proportioned for a 3.0 it really is a shame.
@@dankerbell Yeah, honestly the fact this peg is so close to the official in size and yet they couldnt just properly scale it tells me its deliberate, theres no way they didnt know.
I love the figures that use a double ball peg rather than a ball hinge because it's way easier to swap between bodies. I took the demoniacal fit martialist forever neck peg and put it on the demoniacal fit super saiyan 4 goku body to make the neck shorter and it works perfectly
@@kaioken654 Yeah the only thing we need now is standardised sizes for the ball pegs lol
@BigDeanoReviews It would be wonderful to have 1 standard size for all standard figures, did you get the demoniacal fit super saiyan 4 goku? I did and the joint tolerance is much better than the official on my copy
@kaioken654 Thats good to hear, mines is on its way, should get it this week, seller dragged their feet sending it this time lol
the tonsen heads will fit on this peg. you just gotta really force it. or heat up the headsculpt. but the tonsen heads do fit. i managed to get it on without modifying the peg.
@@Alderan3344 You will absolutely overstretch the hole if you do that, so expect to not be able to use them elsewhere if you do so, thats not them fitting lol. Tonsens heads are already very tight on 2.0 pegs. Im showing that you cant do it unless you use that level of force.
@@BigDeanoReviews oh that makes sense. but the tonsen heads were always going to be for the xeno so thats fine for my collection
@@Alderan3344 Thats fair, its your figure and heads at the end of the day so you can do what you want with it, I just cant in good conscience say they fit when they wont without damaging them is all.
@@Alderan3344if the head hole is too big or stretched, use plastic wrap in the hole and it will help a lot
I heard the model kit new version fits these heads?
Selling all the heads except the white ones 😂
Here’s hoping someone comes along and makes a conversion peg.
Have you tried swapping the neck pegs? I really want to put that super saiyan 3 head or the Ssg head on a shf body.
@@Jas-1119 Unfortunately the pegs dont fit either
@ craaaap! That’s unfortunate. Funny enough I went all in on this xeno armor after your part 1.
I thought to yank out the neck or neck peg and pop it in a Shf. Got my fingers crossed they give us more 3.0 Vegeta’s then.
@@Jas-1119 Well they announced another blue armor version with ssj and blue heads iirc thats coming early next year at least!
@ haha yeah! Definitely gonna try to catch those preorders this time! I supposedly have those ssg & ssgss heads on the way if we’re talking the translucent ones. Granted eBay doesn’t eBay me.
AFFM Customs might have a solution. Infact, his Kong/Beast deities Goku to Bandai Trunks neck conversion peg should do the job, since Bandai's 3.0 Trunks had the same sized neck peg as basically EVERY Vegeta except for the 1.0s (too big) and the 24000 power level Vegeta (too small)
I bought b005 and was gonna put the tk diy vegeta head on 😭
@@9VK7 Ive ordered B005 aswell, just waiting on it shipping lol. Tbh if you're willing to stretch the peg hole any of these would go on, I just dont count that as "fitting" because you're essentially damaging the peg hole.
Speaking of headswaps, I assume you'll be getting the Tamashii Store ssj goku at some point. I just wanted to give you a heads up that the neck peg on that figure seems quite weak (and perhaps a bit thinner than usual). I was just swapping the heads out on mine mere moments ago and the neck peg snapped with ease, I'm gonna try and super glue it back on, but I have already ordered another just in case it proves unsuccessful. I'm quite gutted as I liked the figure way more than I thought I would and then it just broke as I was complimenting it, lol.
@@arenoskarlaen4951 I wouldve got it, but being a US store exclusive means paying over the odds for what basically amounts to a fancy 2.0 Goku so unfortunately I wont be! Appreciate the heads up though, that absolutely sucks, id get on to tamashii and demand a replacement peg!
@@BigDeanoReviewsNot sure if I'd be able to as I got it from Aliexpress
@@arenoskarlaen4951 Ah, gotcha. in that case id try getting a cheap bootleg and taking the peg from that then.
Just fixed it, I had a spare God Goku (the new one, I bought two as he was quite cheap and I already have the original and SDCC version, though I'll swap it out with a bootleg peg when I get one) and took the peg from that. Crisis averted, lol. Though I find it odd why they would make the peg ever so slightly thinner, it just doesn't make any sense (it appears slightly thinner to me, though I might just be thinking that because it broke) Thanks for replying.
@@arenoskarlaen4951you can try to get a refund as the thing was technically “broken”. I’ve done it before with DF ssj2 goku
But that doesn’t make sense on burst zg he put a photo of the Tonsen heads and the new sh blue head on the beast deities body
@@slinkbubbles6069 Early buyers lied im afraid.
@@BigDeanoReviews well hopefully that Adrian customs beast deities neck pegs are compatible with this figure
A RUclipsr by the name of German toy reviews said use hot water on the Tonsen heads so it can fit the beast deities body
@slinkbubbles6069 Thats not fitting them though, another viewer said the same thing, all that will do is overstretch the hole and make it unusable on 2.0 bodies.
@@BigDeanoReviewswill anyone use the 2.0 body with Tonsen anymore
He doesnt need headswaps. Included faces are good enough, and Xeno Vegeta bever goes Blue, so idk why people would do that swap)
@@TheZoruaFilmsMC Well, plenty people wanted to be able to swap the spare heads onto their other figures, plus one version specifically comes with a ssjb head that people were hoping to swap. Compatibility is highly requested with figuarts.
The Chinese blue tackers have struck again 😂
@@EduardoSabatino LOL