Nice job. Only thing I would've done differently is to also cut the top and bottom of the supporting legs at an angle so the "A" has a wider stance for better stability. Come to think of it, I would also screw some supporting blocks under both sides of each step. Be sure not to screw into the grain (cut) side of the wood. This will give greater strength to the steps.
I bought this as a gift for my friend ruclips.net/user/postUgkxcZqgZ8Ynkiz5n_LxIWRlAicuzmz5kCHG who is just starting out in the world of wood work. He loves it!! There is a great section on different wood and what to use for what kind of job and a similar section for tools as well. The projects in it are things you probably would have a go at with clear instructions, pictures, videos and diagrams throughout. Great for a beginner/amateur wood worker.
Muy excelente idea del acabado de esa escalera sobre todo para ser utilizada para pintar techos Paredes o poner algún foco o algún abanico de techo. Gracias por el video👏👏👏👏🙅🙋👍
From what I seen & watched, it would have been very nice if you would have taken the time to add in the cut measurements of each board pieces that were cut, & the screw size used, & the hinge size, that was also used for the project. So one could replicate the beautiful ❤️ job you have just finished.. Job very well done, but please go back -&- add-in measurements please.. Great Job Young Man...
Pretty cool.! I especially like the jointer/planer, and table saw? I love that thing! But I'm wondering, who are the chipmunks, and where did they go....??
If you give that to me, I will not use that. I'm nervous about its stability. The angle of the ladder is too steep, the supporting back end is almost 90 degrees. Good luck on that thing.
Yo nunca aseguraría el peldaño con el tornillo directamente, el peso de la persona hace que el peldaño se desgarre donde va el tornillo , yo le colocaría trozos de la misma madera y arriba el peldaño
Para mi, debe llevar angulos de chapa debajo de cada peldaño, a cada lado, para tener mayor seguridad. La madera de los peldaños colocados de esa manera, plana, y con el espesor que tiene, ofrece poca seguridad, puede rajarse. La idea está buena.
Nice job. Only thing I would've done differently is to also cut the top and bottom of the supporting legs at an angle so the "A" has a wider stance for better stability. Come to think of it, I would also screw some supporting blocks under both sides of each step. Be sure not to screw into the grain (cut) side of the wood. This will give greater strength to the steps.
If the black screws break, flight from a height is guaranteed! Plant on dowels, slots, or stops under the steps, you’re right!
I bought this as a gift for my friend ruclips.net/user/postUgkxcZqgZ8Ynkiz5n_LxIWRlAicuzmz5kCHG who is just starting out in the world of wood work. He loves it!! There is a great section on different wood and what to use for what kind of job and a similar section for tools as well. The projects in it are things you probably would have a go at with clear instructions, pictures, videos and diagrams throughout. Great for a beginner/amateur wood worker.
Yg buat manjat kaki gk sah terlalu halus. Biar gak licin. Maaf ini sekedar untuk meramaikan comen. Makasih ilmunya kapan 2 aku tiru.
Perfect 👌 ❤
Excelente job. Congratulations.
ممتاز شكرا ((اخوكم من ليبيا))
Excelente trabajo podrías compartir las medidas saludos desde México
Good work. Please apply glue before screwing to ensure sturdy bondage.
Lindo proyecto... like y suscripción.. saludos desde Piura Perú ❤️🇵🇪👍
Pekerjaannya rapih. Terima kasih bang sdh berbagi ilmunya.
Muy excelente idea del acabado de esa escalera sobre todo para ser utilizada para pintar techos Paredes o poner algún foco o algún abanico de techo. Gracias por el video👏👏👏👏🙅🙋👍
Kreatif || thanks you for sharing❤️
Excelente trabajo en madera, muy práctico, gracias por compartir sus ideas.
Hmmm... I finally followed Ann's advice and took woodglut instructions. It's great for beginners and has some advanced stuff too.
Bravo, beautiful. 😊😊
Lagyan mo ng stopper bawat under stepboard boss para matibay...delikado yan,screw lang ang nakahawak sa stepboard..
La haré igual. Gracias por compartir
Diy wood folding ladder bravo
Awesome 👍👍
Çok güzel oldu. Basamağın en alt taban seviyesine destek bloku koyarsan dengede daha güvenli durur.
gostei muito parabens pela criatividade
Like this 👍🙏
ruclips.net/channel/UCV80dDFcIqZu-PrfypvxtfQ
Good job 👍😊.. But I think the degree of angle not safe enough 🌹
Very good job thanks
Good
Eu colocaria uma corrente ou corda para evitar que deslize em superfícies escorregadias. Abraço do Brasil
Excelente buenos tardes 👋👋👋
Great work.mantap
Mantap tutorialnya kawan, salam balik supportnya 🙏
WOOD WORKING IDEA
YEAY I LIKE THIS
NICE GOOD !!!
Hello
Cool bonne idée
From what I seen & watched, it would have been very nice if you would have taken the time to add in the cut measurements of each board pieces that were cut, & the screw size used, & the hinge size, that was also used for the project. So one could replicate the beautiful ❤️ job you have just finished..
Job very well done, but please go back -&- add-in measurements please..
Great Job Young Man...
Awesome job 👏 👍 🙌
Muy fácil... gracias
Naic 👌👌👌👌
Very nice, but I think the back legs should lean out a little farther to make the ladder more sturdy. It can collapse very easily the way you have it.
Thank you for watching the video. Wish you good health
Nice... Simple, inexpensive and effective.. Good job
Good work sir g
buena idea gracias por el tip , seria bueno que tambien conpartas las medidas de tus proyectos
Excelente contenido en video
Good 👍
Nice job gun
👌👌👌 👍👍👍
Assalamualaikum bagus sekali ya Kak
Keren, mantappp👍🏼
Good job
Bravo .
Ty dve prkýnka na podpěře bych dal dovnitř ! Jinak super video.
Mantap pak tukang
Nothing to stop the support legs from opening flat
The stress on those wee little hinges would be tremendous if so
👍👍👍👍👏👏👏👏👍👍
Impian punya alat seperti itu
Great and nice job
👌
Amazing. I am from indonesia
ruclips.net/channel/UCV80dDFcIqZu-PrfypvxtfQ
@@FansdAbdelkaderElSector what
Çok güzel tebrik ederim. Merdivenin kaymamasi için alttan küçük demir ile bağlantı kur
very nice video and design. Please add a locking mechanism, so the ladder will not accidentally close . Thanks for sharing
Muy bien explicado
👍🙋♂️🇮🇳
Excelent video! Direct like 👍 from România 😉 🍷
👍👍👍👍💪
Bonita la escalera
Pretty cool.! I especially like the jointer/planer, and table saw? I love that thing! But I'm wondering, who are the chipmunks, and where did they go....??
Use that guard when you are using planner for safety
Mantap pisan
فكرة رائعة لو كان راس السلم شبه صندوق لوضع اغراض عمل عند الحاجة دون النزول والصعود*الجزائر#
Great work mate 👍🏽👍🏽
Muito bom
Gracias amigo excelente video muy útil su tutorial saludos desde Colombia.
Trabajo medio pelo. Con todas las herramientas y el taller que tiene lo pudo haber hecho mucho mejor.
Ide yg cemerlang
Hola, soy Myriam de Argentina y queria saber que es lo que le pones o que tiene ese pomo ...aceite, pegamento...que es? gracias saludos Myriam
Keren.
perfect
the idea is ordinary, but I love it.. Tx
Parabéns. Gostei também da música de fundo.
With state-of-the-art equipment and creative hands to be this good 👍👍
Good 👍
사다리
Excelent works
Top
Buen trabajo. Buena idea !
And who the hell has got such machines at home!?!?!?!
I have done very similar with Woodglut designs.
Thanks for idea. Good plans!
great friends, see you guys again
ruclips.net/channel/UCV80dDFcIqZu-PrfypvxtfQ
Wow awesome idea.. The best sir.. Yung cutting na pahalang ilang degrees yan sir thanks more power to you
Excelente me encantó la escalera...Pero x favor pone las medidas gracias y Saludos
ruclips.net/channel/UCuxbOHa_nj8k6qotTzJrWZAcommunity
ok sana kaso walang glue mga apakan pwede n rin matibay nmn ang screw at walang support yung gitna ng ladder pwede ka tumaob dyn.
If you give that to me, I will not use that. I'm nervous about its stability. The angle of the ladder is too steep, the supporting back end is almost 90 degrees. Good luck on that thing.
Keren
На лесенках нужно было попрыгать и узнать надежность конструкции. За идею + за качество и надежность - - - - - - !!!
😍
I did it too. This is what I used Woodglut designs for
Legal
Yo nunca aseguraría el peldaño con el tornillo directamente, el peso de la persona hace que el peldaño se desgarre donde va el tornillo , yo le colocaría trozos de la misma madera y arriba el peldaño
Para mi, debe llevar angulos de chapa debajo de cada peldaño, a cada lado, para tener mayor seguridad. La madera de los peldaños colocados de esa manera, plana, y con el espesor que tiene, ofrece poca seguridad, puede rajarse. La idea está buena.
Muy cierto la madera del peldaño con clavo o con pija solos no tiene soporte al impulso de trepar
Stodoys has a very large project base.
Never screw into end grain, doesn’t last.
Yep. He's gonna have to add a cleat under each step on each side.
what do you call that drill for wood??
That wouldn't hurt but with board that thick it will be fine. Especially since he'd using screws not nails.
bro can you give me the measurements when i will do it.
👍🏼👍👍🏼👍👍👍🏼👍👍🏼👍👍🏼👍
El proyecto es bueno pero no metería madera con nudos por seguridad y la base de arriba en una sola pieza xq de puede partir