Yes, Wayne is my next stop. Yeah he makes awesome builds for sure. Appreciate you sharing. I’ll catch you on the next one until then. Peace and chicken grease😁👍👍👋👋😎
Thanks very much, I enjoyed it and was really happy with the results. I did actually do a bit on Indy and the animals, but you probably couldn't see it. I just dulled their brightness down a bit so they didn't look so new. 👍
Absolutely love this build ! Planning on getting one from fair rc , now I think I'll do something similar with the wood panels. Reminds me of my grandpas farm truck that I used to use to go dump the garbage at the land fill.
lookin pretty cool. I would weather the wheels and seal everything with a few layers of mattcote. Have at least one dent in the drivers door and fit some dimmed headlamps, weather down warm white LEDs and dirty up the lamp lenses so they are not pure clean white & use current limiting resistor to make them dim, A set of scruffy old number plates would be a nice final touch. Not sure if all the geese will be happy after a roll over, try to keep the animals pointing at the sky -grin-
Sounds cool. 👍 I did weather the wheels. Unfortunately the lacquer wasn't flat, so it was a little too shiny. I need to up my skills to the next level for dents and proper rusty holes. 🤣👍
Great!! Very impressive! You actually made me start my channel! I love you vids! I watch on a different account usually tho, but you’ve got my sub (again) lol!!
I am not a fan of fake patina or weathering. I understand real faded paint and aging on a real old vehicle being like a badge of honor for durability but it ends there for me. Luckily how other folks like their stuff doesn't affect me. I'll keep my stuff nice and new looking.
So good!! You guys knocked it out of the park!
Thanks very much Adam, yours looks great too. 👍😎
Looking forward to the performance mods. 👍
Wow, turned out. Awesome, dude appreciate you sharing.👍👍
Thanks very much mate, appreciate it. 👍
Nice weathered tutorial. And I love the new bed. Nice👍🏾🔥
@OGRadGrow Thanks very much, glad it was helpful. 👍
Yes, Wayne is my next stop. Yeah he makes awesome builds for sure. Appreciate you sharing. I’ll catch you on the next one until then. Peace and chicken grease😁👍👍👋👋😎
Yeah he's got skills. 👍 Glad he's getting some love too as he deserves it. 👍😎
Heck, yeah that looks awesome. Dude, I love it.👍👍 gives me ideas for my flatbed. I’ve got the white one.
They're great rigs aren't they, the Fair RC version performs really well out the box too. 👍
Found ur channel through Adam's...I was blown away at this build..amazing
Thanks very much, appreciate it. I was really happy with it. 👍😁
Yeah, I’m following the build. Just watch them guys here watching you now 8:43 PM Sunday, October 13 super cool love my flatbed Chevy.👍👍
Excellent, glad you're enjoying the build series. Thanks for watching 👍
Cool Weathering an the Details on the back. Make this coming directly from the Farm;) Cool Build love it.
Thanks very much, appreciate it. 👍
I was really happy with how it turned out. 👍
Looks great and super fun! Maybe a tiny bit of weathering/detailing on the animals and Indy? Looking forward to the next installment!
Thanks very much, I enjoyed it and was really happy with the results. I did actually do a bit on Indy and the animals, but you probably couldn't see it. I just dulled their brightness down a bit so they didn't look so new. 👍
Absolutely love this build ! Planning on getting one from fair rc , now I think I'll do something similar with the wood panels. Reminds me of my grandpas farm truck that I used to use to go dump the garbage at the land fill.
Thanks very much 👍
Ah that's so cool. I was going for that old used farm truck look. I'm really happy with how it turned out. 👍😁
I love it! capecrawlers and doyourc are literally the only 2 crawler channels to follow and you guys are friends!
Thanks very much, appreciate it. 👍😁
Ah well, there you go, you got us both in this series. 👍😎
looks great, brilliant job, not sure if i could do that because the body is so flipping nice 😂 loved the end result mate, does look really good 👍👍👍😃👌👌
Thanks very much mate 👍😎
🤣 Yeah, you do have to just go for it and not look back! 😬 I prefer a used looking rig, so it's OK for me. 👍😁
Both builds are killer so far!
Thanks very much, they all look great don't they. Wayne's looks awesome, love a wrecker. 👍😎
Nice cross promotion of each other and fms! Good work too. Same methods the drone guys used to do. This is the best way to market and sell
Thanks very much 👍😁
lookin pretty cool. I would weather the wheels and seal everything with a few layers of mattcote. Have at least one dent in the drivers door and fit some dimmed headlamps, weather down warm white LEDs and dirty up the lamp lenses so they are not pure clean white & use current limiting resistor to make them dim, A set of scruffy old number plates would be a nice final touch. Not sure if all the geese will be happy after a roll over, try to keep the animals pointing at the sky -grin-
Sounds cool. 👍
I did weather the wheels. Unfortunately the lacquer wasn't flat, so it was a little too shiny. I need to up my skills to the next level for dents and proper rusty holes. 🤣👍
Great!! Very impressive! You actually made me start my channel! I love you vids! I watch on a different account usually tho, but you’ve got my sub (again) lol!!
Thanks very much, appreciate it. That's awesome, hope the channel is going well. 👍😎
Appreciate the sub...again. 👍😁😎
Looks fantastic.👍🏼
Thanks very much 👍😁
Awesome job ❤
Thanks very much 👍😁
Dude I love that thing. Those animals are cracking me up 😂
🤣 Thanks very much mate, I just couldn't help myself! 😁
I love healthy competition it’s very interesting to see how different you two build and accessorize
Yeah, everyone has their own style which is nice. 👍
That just looks incredible. Great work.
Thanks very much, appreciate it. 👍😁
Nice Truck 😮👍
Thanks very much 👍
looks really good that m8 love the animals was waiting to see like a sheepdog in passenger seat or some eggs hiding in hay
Thanks very much mate. 👍😎
🤣 I literally was going to have a dog on the passenger seat, but couldn't find one the right size! 🤣😁
Awesome 😎
Thanks very much 👍
hey man love how it turned out not one thing I would change about it I really like your positive energy and nice smile
Thanks very much, really appreciate it. Great comment. 👍😁
The Bob Ross of R/C 😂
🤣🤣🤣 I'm just missing some hair! 😬🤣👍
SWEET
:)
Thanks very much 👍
Dig it!
Thanks very much 👍😎
Nice 💪👍👋👋
Thanks very much mate 👍😎👋😁
🎉🎉🎉🎉🎉it's good 🎉🎉🎉🎉🎉
Thanks very much 👍
Looks awesome great build Love to get on this build battle if you know of our course we are scale made 🤘🤘❤️
Thanks very much 👍😎
👋😊👍
👍😎👋👍
having just come from mr crawlstocks vid its alredy very close but you cant beat a farm truck
Ah thanks very much. I'm really happy how it turned out. My favourite build so far. 👍
How did you get your tires to look a little flat
The included foams are very soft, so with a heavy rig it squishes them. 👍
@@DoURC nice and that definitely makes sense there nice things rig as well too and keep the builds coming
@@ogjmcnutt9756 Thanks very much 👍😎
I am not a fan of fake patina or weathering. I understand real faded paint and aging on a real old vehicle being like a badge of honor for durability but it ends there for me. Luckily how other folks like their stuff doesn't affect me. I'll keep my stuff nice and new looking.
That's fair enough, if we all liked the same thing it would be a boring world. 👍
Random question does anybody know if you can wash off the wear and tear stuff if it doesn’t look good
If you don’t seal it, IPA/any spirits will clean it straight off usually!
Yeah you can. As you apply it you can wash it off. Once it's dry, or if you apply it dry, you'd need to use something more potent to remove it. 👍
B R I L L I A N T
Thanks very much, appreciate it. 👍😁
body is missing the wing window/smokers window... every rc hard body has gotten so many things wrong with the sqarebodies.
I'm in the UK, so have no idea about Chevy's tbh. Looks good to me. 👍
The weathering part is cool but all the animals and crap in the back👎🏻
🤣 That's fair enough, if we all liked the same thing it would be a boring world. 👍
I was really happy with my weathering. 😁
@@DoURC social media it is just my opinion
No idea what that smiley is supposed to mean? 🤷♂️