✅ Ansys Fluent Tutorial For Beginners - Flow through Duct
HTML-код
- Опубликовано: 2 июн 2020
- In this Ansys fluent tutorial for beginners we will learn how to do fluid flow and heat transfer analysis in rectangular duct using ansys fluent
ansys fluent tutorial.
if you want to join our solidworks course click on this link :
• SOLIDWORKS BEGINNER TO...
For More Ansys fluent tutorials click on this link :
• Ansys Fluent Tutorials...
Part file link :
drive.google.com/file/d/1F88x...
Thank you for watching don't forget to subscribe
ansys fluent tutorial for beginners
ansys fluent flow through duct
ansys fluent
#ansys
#ansysfluent
#ansysflowthroughduct
cant reach the part file link, it says need permission to access the file
I have make it public now check.
drive.google.com/file/d/1F88xxgBibNHRPpLpRA0Cvd-rRU4QSzBf/view?usp=sharing
@@solidworksandansystutor thanks a lot, it works now
Thank you for this video, it was especially helpful as I was having trouble preparing the geometry for analysis.
If you're not going to include audio description you should slow down what you're doing. amount of times I had to go back in this video to see what you clicked on...
Slow it down yourself in playback settings
Yeah cheers mate, finished my degree 2 and a half years ago now but thanks for the tip ;)
Very helpful, Thankyou!
Dear Sir, I have one question about the in inlet and outlet boundary conditions. The molten salt enter a pipe with 5m lenght and 20mm diameter and 500k . The pipe is made of stainless steel. The heat flux is 800,000kW/m2. So how much should be the inlet flow rate up to we receive the outlet tempereture 800K. It will be highly appreciated when you guide e the boundary conditions in inlet and outlet in such a case. Thank you.
Hi sir, what material is the duct and would you say that the results u obtained from the simulation show that the duct is working as its supposed to be, or that the duct is not performing well?
Sir,
I have one query, When designing the HVAC supply duct system, After calculation of ASP from the manufacturer blower data (ESP- Device pressure losses). That ASP will become the pressure drop budget for the duct system.
Now if we are designing the duct system with equal friction method based on FR calculated...and carrying out CFD analysis of designed duct, the solver fetches static pressure and total pressure data w.r.t our design.
Now w.r.t previously calculated ASP which is our pressure drop budget, say some 0.4 inches of water gauge.
Now inorder to check whether duct design is within the limits as per ASP in CFD analysis tools.
which pressure drop should I need to consider ( it's a total pressure in the volume of air or it's difference in Total pressure at inlet to outlets, or it's a max static pressure developed in the air volume inside duct)
kindly clarify
Thanx
Thank you so much. Does anyone know why we pick double precision and change the solver process for Solutions?
Solver processes is the number of cores you want to dedicate for solving the process I have a 8 core laptop I normally enter 2 as option its enough for solving normal problems and GPU GPU is the number of gpus in your system in laptops its normally 1. If you do not have gpu keep that option zero. Hope you got the answer if any question please ask : )
@@AbhishekPawar-bi4jx Alright thank you very much
I tried to analyze with the data you uploaded, but I got an error like this: Update failed for the Mesh component in Fluid Flow (Fluent). Error updating cell Mesh in system Fluid Flow (Fluent). View the messages in the Meshing editor for more details.
I don't have much experience with ansys. I couldn't understand what I did wrong. I reduced the number of meshes and arranged them in various ways, but the result is always the same.
bro i am not getting the part file as a component , i am getting it as in code form , what will i do
?
how to fix a mesh control is not associated to any geometry
Your videos would have been very good if they were voiced. It's quite difficult to follow when there's no voice.
after the solution is converged
x-coord
y-coord
this type of writtings are not coming.
sir how much is the pressure drop
how to create the duct in solid works pls upload a video tutorial
how to make 2023r1 outline??
Excuse me, my simulation got temperature limited in the iteration of 42, am i wrong the step?
Depends the Solver stops the calculation as soon as the solution gets converged. Mine got converged at 57
I believe outlet pressure must be kept at guage 1 atm
my thermal tab is not opening
Bro involex epudi bro test panrathu
Disabling dislikes is an automatic dislike
where is the geo file.
part file is opening in code form ,how to get it as an diagram, which app is required for that part file to open .
save it as. part 1.step or .stp it will be converted to 3d
@@solidworksandansystutor in which app we have to open this part file ??
Oh kindly add audio by explaining it
Sure